Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets

K.K. Kowalski; J. Achterberg; C.M.M. Lierop, van; P.P.J. Bosch, van den

doi:10.1109/CCA.2010.5611233

Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets

K.K. Kowalski
, J. Achterberg
, C.M.M. Lierop, van
, P.P.J. Bosch, van den

Control Systems

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

4 Citaten (Scopus)

407 Downloads (Pure)

Samenvatting

A linear quadratic bumpless transfer technique for a six-degree-of-freedom planar actuator with integrated active magnetic bearing is proposed to solve the lift-off and landing problem by switching between different controller sets. The need for multiple controller operation states results from the difference between robustness and wind-up concerns during lift-off and landing and the high performance tracking requirements for accurate operation. A procedure for tuning the plant input and error matrices used in the Linear Quadratic Bumpless Transfer method based on new observations is presented. The procedure has been applied to synthesize a bidirectional bumpless switching mechanism that was successfully applied and tested on a 6 DOF laboratory setup.

Originele taal-2	Engels
Titel	Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	2203-2208
ISBN van geprinte versie	978-1-4244-5362-7
DOI's	https://doi.org/10.1109/CCA.2010.5611233
Status	Gepubliceerd - 2010

Toegang tot document

10.1109/CCA.2010.5611233

Metis242388Definitieve gepubliceerde versie, 1,01 MB

Citeer dit

Kowalski, K. K., Achterberg, J., Lierop, van, C. M. M., & Bosch, van den, P. P. J. (2010). Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets. In Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan (blz. 2203-2208). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/CCA.2010.5611233

Kowalski, K.K. ; Achterberg, J. ; Lierop, van, C.M.M. et al. / Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets. Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan. Piscataway : Institute of Electrical and Electronics Engineers, 2010. blz. 2203-2208

@inproceedings{344121e89088473b899576502e844eaa,

title = "Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets",

abstract = "A linear quadratic bumpless transfer technique for a six-degree-of-freedom planar actuator with integrated active magnetic bearing is proposed to solve the lift-off and landing problem by switching between different controller sets. The need for multiple controller operation states results from the difference between robustness and wind-up concerns during lift-off and landing and the high performance tracking requirements for accurate operation. A procedure for tuning the plant input and error matrices used in the Linear Quadratic Bumpless Transfer method based on new observations is presented. The procedure has been applied to synthesize a bidirectional bumpless switching mechanism that was successfully applied and tested on a 6 DOF laboratory setup.",

author = "K.K. Kowalski and J. Achterberg and \{Lierop, van\}, C.M.M. and \{Bosch, van den\}, P.P.J.",

year = "2010",

doi = "10.1109/CCA.2010.5611233",

language = "English",

isbn = "978-1-4244-5362-7",

pages = "2203--2208",

booktitle = "Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Kowalski, KK, Achterberg, J, Lierop, van, CMM & Bosch, van den, PPJ 2010, Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets. in Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan. Institute of Electrical and Electronics Engineers, Piscataway, blz. 2203-2208. https://doi.org/10.1109/CCA.2010.5611233

Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets. / Kowalski, K.K.; Achterberg, J.; Lierop, van, C.M.M. et al.
Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan. Piscataway: Institute of Electrical and Electronics Engineers, 2010. blz. 2203-2208.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets

AU - Kowalski, K.K.

AU - Achterberg, J.

AU - Lierop, van, C.M.M.

AU - Bosch, van den, P.P.J.

PY - 2010

Y1 - 2010

N2 - A linear quadratic bumpless transfer technique for a six-degree-of-freedom planar actuator with integrated active magnetic bearing is proposed to solve the lift-off and landing problem by switching between different controller sets. The need for multiple controller operation states results from the difference between robustness and wind-up concerns during lift-off and landing and the high performance tracking requirements for accurate operation. A procedure for tuning the plant input and error matrices used in the Linear Quadratic Bumpless Transfer method based on new observations is presented. The procedure has been applied to synthesize a bidirectional bumpless switching mechanism that was successfully applied and tested on a 6 DOF laboratory setup.

AB - A linear quadratic bumpless transfer technique for a six-degree-of-freedom planar actuator with integrated active magnetic bearing is proposed to solve the lift-off and landing problem by switching between different controller sets. The need for multiple controller operation states results from the difference between robustness and wind-up concerns during lift-off and landing and the high performance tracking requirements for accurate operation. A procedure for tuning the plant input and error matrices used in the Linear Quadratic Bumpless Transfer method based on new observations is presented. The procedure has been applied to synthesize a bidirectional bumpless switching mechanism that was successfully applied and tested on a 6 DOF laboratory setup.

U2 - 10.1109/CCA.2010.5611233

DO - 10.1109/CCA.2010.5611233

M3 - Conference contribution

SN - 978-1-4244-5362-7

SP - 2203

EP - 2208

BT - Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Kowalski KK, Achterberg J, Lierop, van CMM, Bosch, van den PPJ. Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets. In Proceedings of the 2010 IEEE International Conference on Control Applications (CCA 2010), part of the 2010 IEEE Multi-Conference on Systems and Control (MSC 2010), 8-10 September 2010, Yokohama, Japan. Piscataway: Institute of Electrical and Electronics Engineers. 2010. blz. 2203-2208 doi: 10.1109/CCA.2010.5611233

Implementation of a linear quadratic bumpless transfer method to a magnetically levitated planar actuator with moving magnets

Samenvatting

Toegang tot document

Vingerafdruk

Citeer dit