Skip to search boxSkip to navigationSkip to main content

Increasing Angle Acceptance of Displacement Measuring Interferometers By Means of a Diverging Laser Beam

Student thesis:
Studentthesis types
Master

Information

Thesis Award Date

12/12/2025

Qualification Level

Master

Original Language

English

Thesis Managed By

Supervisors

About

The rotational range of many high-end motion platforms is limited by the use of plane mirror interferometers, for example, in stacking integrated circuits. This paper presents an optical concept for increasing the angle acceptance of displacement measuring interferometers with a measurement stroke of about 0.5 m, as typical for motion stages in the semiconductor industry. The concept uses a diverging laser beam to significantly increase the target mirror range of rotation. By letting the beams from a single path and a double path interfere on a detector, the displacement of the target can be measured, while eliminating first-order wavefront tilt. Two interferometer layouts that apply this diverging beam concept are presented. A model based on Gaussian beam theory is developed as a design tool and to characterize the concept based on key performance indicators. A demonstrator of the most promising layout is built. This setup demonstrates that the angle acceptance is increased thirtytwofold from 0.5 mrad to 16 mrad, while reaching a detected contrast of at least 0.5 and a signal-to-noise ratio of at least 10 at a rotation of ±16 mrad and a distance of 0.5 m.

Bibliographical Note

Afstudeerverslag.