Skip to search boxSkip to navigationSkip to main content

Unraveling the impact of reverse currents on electrode stability in anion exchange membrane water electrolysis

Output:
Contribution to journal
Article
Academic
Peer-review

Open access

Information

Output type

Output:
Contribution to journal
Article
Academic
Peer-review

Original language

English

Article number

234877

Journal (Volume, Issue Number)

Journal of Power Sources (Volume 613)

Publication milestones

  • E-pub ahead of print - 13/06/2024
  • Published - 01/09/2024

Publication status

Published - 01/09/2024

ISSN

0378-7753

Funding Details

Platinum on Vulcan XC-72R support (40 % Pt), Platinum ruthenium on high surface area ketjenblack EC-300J (50 % PtRu, Pt: Ru: 1:1) were purchased from the Fuel cell store. NiMo/C catalyst (50 wt%) was purchased from Pajarito powder. NiFe-LDH was synthesized by gelation-deflocculation using nickel chloride and iron chloride precursors according to the protocol from Koshikawa et al. [13]. Piperion membrane (60 \u03BCm) and ionomer solution (5 wt% in ethanol) were purchased from Versogen. Fiber-sintered nickel (Bekaert) with a thickness of 500 \u00B1 10 \u03BCm, fiber diameter of 20 \u03BCm and a porosity of 66 % was used as PTL for both half-cells. Potassium hydroxide pellets (\u226585 % purity) were obtained from VWR chemicals, and 2-propanol was purchased from Sigma Aldrich.For OER, NiFe-LDH nanoparticles were used as active electrocatalyst. For HER, Pt on Vulcan support, PtRu on Ketjenblack support or NiMo/C were used as catalysts. Catalyst inks consisting of 4 wt% solids and 96 wt% solvents were prepared. For every 100 mg of catalyst, 750 mg of DI water (18 M\u03A9 cm), 3000 mg of 2-propanol (1:4 water/2 propanol), and 400 mg of Piperion ionomer (Ionomer: Catalyst = 0.2) were added. Then, the mixture was ultrasonicated in an ice bath for 90 min to ensure homogenous dispersion of the catalyst ink. All the cell configurations were developed using the catalyst-coated substrate (CCS) method [8]. The precut, pretreated PTLs were used as the substrate upon which the catalyst inks were coated. The electrodes were prepared using a handheld airbrush spraying gun (Harder-Steenbeck). The airbrush was connected to a nitrogen line. The loaded inks were sprayed onto the nickel PTL using a meander-shaped spray pattern to ensure maximum coverage and homogenous ink distribution. After every spray pass, the substrate was weighed and the spraying was continued until the desired loading (2 \u00B1 0.2 mg cm\u22122 for NiFe-LDH, 0.6 \u00B1 0.2 mg cm\u22122 for Pt-based catalysts and 5 \u00B1 0.2 mg cm\u22122 for NiMo/C catalyst) was reached. The substrate was placed on a hot plate (80 \u00B0C) during the coating process to ensure rapid evaporation of organic solvents from the ink.This research received funding from the Dutch Research Council (NWO) in the framework of the Reversible Large Scale Energy Storage [RELEASE] Project (Grant number: 17621). The authors further acknowledge Adarsh Patil and Anouk W.N de Leeuw den Bouter for their assistance in synthesizing NiFe-LDH nanoparticles and measuring XPS spectra of cathode catalysts. This research received funding from the Dutch Research Council (NWO) in the framework of the Reversible Large Scale Energy Storage [RELEASE] Project (Grant number: 17621). The authors further acknowledge Adarsh Patil and Anouk W.N de Leeuw den Bouter for their assistance in synthesizing NiFe-LDH nanoparticles and measuring XPS spectra of cathode catalysts.

Abstract

Anion Exchange Membrane Water Electrolysis (AEMWE) stands out as one of the promising ways of producing green hydrogen. However, significant strides in performance and durability are necessary for commercial competitiveness. Shunt currents and reverse currents are common problems associated with electrolyzers using conductive liquid electrolytes during start/stop conditions and can enhance electrode degradation. This study incorporates a dual Pt-wire reference electrode within the flow cell consisting of a NiFe-layered double hydroxide anode and different cathode materials to decouple individual electrode kinetics under steady state and intermittent operating conditions. The performance of bimetallic cathode catalysts like PtRu/C and NiMo/C was assessed in comparison with traditional Pt/C catalysts in the context of the hydrogen evolution reaction. The initial observed catalyst activity displayed an evident trend in the order of PtRu/C > Pt/C > NiMo/C. When subjected to reverse currents, all three systems showed degradation in performance. The use of reference electrodes illustrated that all cathode coatings degraded as a result of the reverse currents while the anode remained relatively stable. The degradation followed the trend of NiMo/C > PtRu/C > Pt/C. This work thus shows that reverse currents are a real issue for AEMWE and demonstrates the importance of investigating electrodes under intermittent conditions.

Metrics

Metrics

SciVal
citations
49
Download statistics
Download count
777
Scopus
citations
49
SciVal
FWCI
4.26
SciVal
Author count
3
SciVal
Paper percentile
96
SciVal
Top percentile
5

PlumX, opens in new tab

Citation count
49
Captures
90

UN SDGs

In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. This output contributes to the following SDG(s):
  • SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy