Low-cost wire-electrospun sulfonated poly(ether ether ketone)/poly(vinylidene fluoride) blend membranes for hydrogen-bromine flow batteries
- Sanaz Abbasi,
- ,
- Wiebrand Kout,
- ,
- Elestor B.V.,
- ,
- DIFFER Dutch Institute for Fundamental Energy Research
Output:
Contribution to journal
Article
Academic
Peer-reviewOpen access
Information
Output type
Output:
Contribution to journal
Article
Academic
Peer-reviewOriginal language
EnglishArticle number
119258Journal (Volume, Issue Number)
Journal of Membrane Science (Volume 628)Publication milestones
- Published - 15/06/2021
Publication status
Published - 15/06/2021
ISSN
0376-7388Funding Details
This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement no. 765289 .
Abstract
<p>Cost-effective dense membranes were developed by blending proton-conductive sulfonated poly(ether ether ketone) (SPEEK) with inert, mechanically stable poly(vinylidene fluoride) (PVDF) for hydrogen-bromine flow batteries (HBFBs). Wire-electrospinning followed by hot-pressing was employed to prepare dense membranes. Their properties and performance were compared to solution-cast membranes of similar composition and thickness. Electrospinning improved the ionic conductivity and bromine diffusion properties by providing interconnected ion-conductive SPEEK nanofiber pathways through a PVDF matrix. Relatively thin (~50–60 μm) electrospun membranes with a SPEEK/PVDF ratio (wt%/wt%) of 90/10 and 80/20 showed comparable Br<sub>3</sub><sup>−</sup> diffusion rates as the relatively thick and commercially available perfluorosulfonic acid (PFSA) membrane (~100 μm) at a 35%–42% lower proton conductivity. The latter can be attributed to the poorer ion conductivity of SPEEK compared to PFSA and the presence of PVDF. The HBFB single cell featured the best polarization behavior and ohmic area resistance with the electrospun membrane containing 80/20 (wt%/wt%) SPEEK/PVDF. However, the low thickness and insufficient chemical/mechanical stability of the ES 80/20 causes a rapid decay in the HBFB cycling performance. This study promotes a life-time comparison study between the low-cost wire-electrospun SPEEK/PVDF blend membranes (~€100 m<sup>−2</sup>) and the typically used PFSA membranes (~€400 m<sup>−2</sup>) for a long-term HBFB performance.</p>
Metrics
Metrics
Scopus
citations
13
SciVal
FWCI
0.52
SciVal
Author count
5
SciVal
Paper percentile
53
SciVal
citations
13
PlumX, opens in new tab
Captures
27
Citation count
13
