Skip to search boxSkip to navigationSkip to main content

End-to-End Performance Optimization of a Dual-Hop Hybrid VLC/RF IoT System Based on SLIPT

  • Huijie Peng
    ,
  • Qiang Li(corresponding author)(Corresponding author)
    ,
  • ,
  • Xiaohu Ge
    ,
  • Jiliang Zhang
*Corresponding author for this work
Output:
Contribution to journal
Article
Academic
Peer-review

Information

Output type

Output:
Contribution to journal
Article
Academic
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 17356-17371 (16 pages)

Journal (Volume, Issue Number)

IEEE Internet of Things Journal (Volume 8, Issue 24)

Publication milestones

  • Published - 15/12/2021

Publication status

Published - 15/12/2021

ISSN

2327-4662

Funding Details

This work was supported in part by the Natural Science Foundation of China (NSFC) under Grant 61971461, and in part by the Hubei Provincial Key Research and Development Program under Grant 2020BAA002. This article was presented in part at the IEEE/CIC International Conference on Communications in China (ICCC), Chongqing, China, 2020.

Abstract

<p>In order to enhance the service provisioning to users in the indoor environment, a hybrid visible light communication (VLC)/radio-frequency (RF) Internet of Things (IoT) system is proposed based on simultaneous lightwave information and power transfer (SLIPT). A mobile user equipment, which serves as an off-the-grid relay, is able to extract information from the light-emitting diode source and then forward the processed information to the destination far away, thus dividing the signal transmission into two hops. Specifically, the optical signal received at the relay is separated into alternating current and direct current components for information decoding and energy harvesting, respectively, in the first hop. Then, the energy harvested is used to forward the processed source information to the destination by using RF in the second hop. Subject to the constraints imposed on both the average and the peak powers of the source, the end-to-end outage probability of the system is analytically derived in a closed form. On this basis, the minimization of the end-to-end outage probability is formulated as an optimization problem. This problem is then solved with a joint design of the peak amplitude and the direct current bias of the source transmitter, by trading-off between the performance of two successive hops. Simulation results demonstrate that by using the proposed optimal solution, the information flow and energy flow can be dynamically balanced, resulting in significant performance gains in terms of outage probability and throughput.</p>

Bibliographical Note

Funding Information: This work was supported in part by the Natural Science Foundation of China (NSFC) under Grant 61971461, and in part by the Hubei Provincial Key Research and Development Program under Grant 2020BAA002. This article was presented in part at the IEEE/CIC International Conference on Communications in China (ICCC), Chongqing, China, 2020.

Metrics

Metrics

SciVal
citations
40
SciVal
FWCI
1.89
SciVal
Author count
5
SciVal
Paper percentile
86
Scopus
citations
40

PlumX, opens in new tab

Captures
12
Citation count
40