Skip to search boxSkip to navigationSkip to main content

Electrode-level water management strategies for anion exchange membrane fuel cells

  • Yingdan Cui
    ,
  • ,
  • Tarso Bastos
    ,
  • Mohammad Al Murisi
    ,
  • Noor Ul Hassan
    ,
  • Saheed Lateef
*Corresponding author for this work
Output:
Contribution to journal
Article
Academic
Peer-review

Open access

Information

Output type

Output:
Contribution to journal
Article
Academic
Peer-review

Original language

English

Article number

145538

Journal (Volume, Issue Number)

Electrochimica Acta (Volume 512)

Publication milestones

  • Published - 01/02/2025

Publication status

Published - 01/02/2025

ISSN

0013-4686

Abstract

Anion exchange membrane fuel cells (AEMFCs) have emerged as a promising alternative to commercialized proton exchange membrane fuel cells because they can enable much lower costs by using cheaper materials, especially non-precious metal electrocatalysts. However, the commercialization of AEMFCs faces several technical challenges, including water management during operation. More specifically, achieving high power density typically requires AEMFCs to be operated with anode/cathode reacting gas dew points much lower than the cell operating temperature to prevent flooding. Conversely, achieving long lifetime typically requires reacting gases with high relative humidities to be supplied to the cell. A solution is needed that can allow for high power density to be achieved under states of high hydration – i.e., high reacting gas dew points, even at lower operating temperatures (e.g., 60 °C). This work explores multiple electrode-level water management strategies for AEMFCs with the goal of enabling high power operation at high states of hydration, including: i) hydrophobic catalyst layers by adding PTFE; ii) hydrophilic catalyst layers by adding Nafion®; iii) gas diffusion layers (GDLs) with patterned wettability; and iv) combinations thereof. Compared to hydrophobic electrodes suffering serious flooding at high hydration states, the promising result of this work is one of the highest reported peak power densities reported to date at 60 oC, 1.5 W cm-2, under H2/O2 flow with hydrophilic-hydrophobic hybrid electrodes, even with anode and cathode dew points of 59 °C and 62 °C, respectively. It is expected that these electrode-level water management strategies can contribute to the commercialization of AEMFCs in the near future.

Bibliographical Note

Publisher Copyright: © 2024

Metrics

Metrics

SciVal
FWCI
1.16
SciVal
Author count
11
SciVal
Paper percentile
75
SciVal
citations
7
Scopus
citations
7
Download statistics
Download count
114

PlumX, opens in new tab

Citation count
7
Captures
15