Skip to search boxSkip to navigationSkip to main content

Design constraints of photonic-lantern spatial multiplexer based on laser-inscribed 3-D waveguide technology

  • Haoshuo Chen
    ,
  • Nicolas K. Fontaine
    ,
  • Roland Ryf
    ,
  • Binbin Guan
    ,
  • S. J Ben Yoo
    ,
Output:
Contribution to journal
Article
Academic
Peer-review

Information

Output type

Output:
Contribution to journal
Article
Academic
Peer-review

Original language

English

Article number

6955710

Pages from-to (Number of pages)

Pages 1147-1154 (8 pages)

Journal (Volume, Issue Number)

Journal of Lightwave Technology (Volume 33, Issue 6)

Publication milestones

  • Published - 15/03/2015

Publication status

Published - 15/03/2015

ISSN

0733-8724

Abstract

Laser-inscribed 3-D waveguide (3DW) technology has been applied to realize photonic-lantern spatial multiplexer (SMUX), which potentially enables lossless mode (de)multiplexing. However, the index contrast Δn between the transparent substrate and the spatially-inscribed waveguides by femto-second laser pulses is generally smaller than 6 × 10-3. It is simulated that a 3DW SMUX with Δ n <6 × 10-3 is able to provide a low mode-dependent loss (MDL) and coupler insertion loss (CIL) when coupling to a three-mode few-mode fiber (FMF). However, in six-and 15-mode cases, to guide all supermodes, few-mode region created by coupled or merged waveguides at the FMF side of the 3DW SMUX cannot be very small. This results in mode-profile mismatch between the 3DW SMUX and a low differential-group-delay FMF, which is generally with Δn around 1 × 10-2. Instead of employing bulky imaging optics, uptapering FMF is proposed to enlarge the modes of the FMF for minimizing the mode-profile mismatch. Simulation shows MDL and CIL enhancement can be achieved by the uptapering solution. It also points out that as mode number increases to 15, although uptapering FMF still improves coupling performance, low MDL <1dB cannot be acquired with Δ n <= 6 × 10-3. In order to achieve a lossless mode (de)multiplexing for 15 spatial modes, Δ n = 1 × 10-2 is required for a 15-core 3DW SMUX. Moreover, a fully-packaged dual-channel 3DW coupling circuit including two six-mode SMUXes is introduced and experimentally demonstrated. MDL = 7 and CIL <8 dB is achieved in a loop through measurement with the two SMUXes. Mode-profile mismatch due to the limited Δn of the 3DW device is solved by uptapering FMF with a factor of 1.4.

Metrics

Metrics

SciVal
citations
53
Download statistics
Download count
4
SciVal
FWCI
2.57
SciVal
Author count
6
SciVal
Paper percentile
91
SciVal
Top percentile
10
Scopus
citations
53

PlumX, opens in new tab

Citation count
53
Captures
42