Skip to search boxSkip to navigationSkip to main content

Analysis of microinductor performance in a 20-100 Mhz DC/DC converter

Output:
Contribution to journal
Article
Academic
Peer-review

Open access

Information

Output type

Output:
Contribution to journal
Article
Academic
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 2212-2218 (7 pages)

Journal (Volume, Issue Number)

IEEE Transactions on Power Electronics (Volume 24, Issue 9)

Publication milestones

  • Published - 2009

Publication status

Published - 2009

ISSN

0885-8993

Abstract

This paper presents a low-profile thin-film microfabricated inductor on silicon and its performance in a high-frequency low-power DC/DC converter. The design of the inductors has focused on maximizing efficiency while maintaining a relatively flat frequency response up to 30 MHz. The inductance at 20 MHz is approximately 150 nH with a resistance of 1.8 ¿. The performance of the microinductor has been compared to two conventional commercially available 150-nH chip inductors. One of the chip inductors has a magnetic-material core and the other is an air core. The maximum efficiency of the microinductor, which relates the power loss of the microinductor to output power loss of the converter, is measured to be approximately 93% at 20 MHz. The low-power DC/DC converter operates in the tens of milliwatts output power range, with an input voltage of 1.8 V and an output voltage programmable between 0 and 1.8 V. The converter maximum efficiency when using the microinductor on silicon is 78.5% at 20 MHz, which is approximately 2% lower than the efficiency using the conventional chip inductors.

Documents and Links

Metrics

Metrics

SciVal
citations
40
SciVal
FWCI
2.35
SciVal
Author count
5
SciVal
Paper percentile
89
Scopus
citations
40
Download statistics
Download count
575

PlumX, opens in new tab

Citation count
40
Captures
26