Two component injection molding of phase separating blends

B.J. Keestra; P.D. Anderson; H.E.H. Meijer

doi:10.3139/217.1907

Two component injection molding of phase separating blends

B.J. Keestra, P.D. Anderson, H.E.H. Meijer

Onderzoeksoutput: Bijdrage aan tijdschrift › Tijdschriftartikel › Academic › peer review

1 Citaat (Scopus)

1 Downloads (Pure)

Samenvatting

A partially miscible polymer PMMA/SAN blend is used in 2Kinjection molding to produce a sandwich structure with aheterogeneous skin layer. Two different strategies are explored toobtain the desired structure either via sequential injectionmolding or via the use of the fountain flow. Both cases arestudied with scanning electron microscopy to visualize thestructure in the skin layer. In addition, numerical modelingexamples are presented to improve understanding of themorphologies that have been created with injection molding.

Originele taal-2	Engels
Pagina's (van-tot)	168-174
Tijdschrift	International Polymer Processing
Volume	21
Nummer van het tijdschrift	2
DOI's	https://doi.org/10.3139/217.1907
Status	Gepubliceerd - 2006

Toegang tot document

10.3139/217.1907

Vingerafdruk Duik in de onderzoeksthema's van 'Two component injection molding of phase separating blends'. Samen vormen ze een unieke vingerafdruk.

Citeer dit

@article{4503e4749ffe4dceb8543a96dc760822,

title = "Two component injection molding of phase separating blends",

abstract = "A partially miscible polymer PMMA/SAN blend is used in 2Kinjection molding to produce a sandwich structure with aheterogeneous skin layer. Two different strategies are explored toobtain the desired structure either via sequential injectionmolding or via the use of the fountain flow. Both cases arestudied with scanning electron microscopy to visualize thestructure in the skin layer. In addition, numerical modelingexamples are presented to improve understanding of themorphologies that have been created with injection molding.",

author = "B.J. Keestra and P.D. Anderson and H.E.H. Meijer",

year = "2006",

doi = "10.3139/217.1907",

language = "English",

volume = "21",

pages = "168--174",

journal = "International Polymer Processing",

issn = "0930-777X",

publisher = "Carl Hanser Verlag GmbH & Co. KG",

number = "2",

}

TY - JOUR

T1 - Two component injection molding of phase separating blends

AU - Keestra, B.J.

AU - Anderson, P.D.

AU - Meijer, H.E.H.

PY - 2006

Y1 - 2006

N2 - A partially miscible polymer PMMA/SAN blend is used in 2Kinjection molding to produce a sandwich structure with aheterogeneous skin layer. Two different strategies are explored toobtain the desired structure either via sequential injectionmolding or via the use of the fountain flow. Both cases arestudied with scanning electron microscopy to visualize thestructure in the skin layer. In addition, numerical modelingexamples are presented to improve understanding of themorphologies that have been created with injection molding.

AB - A partially miscible polymer PMMA/SAN blend is used in 2Kinjection molding to produce a sandwich structure with aheterogeneous skin layer. Two different strategies are explored toobtain the desired structure either via sequential injectionmolding or via the use of the fountain flow. Both cases arestudied with scanning electron microscopy to visualize thestructure in the skin layer. In addition, numerical modelingexamples are presented to improve understanding of themorphologies that have been created with injection molding.

U2 - 10.3139/217.1907

DO - 10.3139/217.1907

M3 - Article

VL - 21

SP - 168

EP - 174

JO - International Polymer Processing

JF - International Polymer Processing

SN - 0930-777X

IS - 2

ER -