Towards large area stable perovskite solar cells and modules

Valerio Zardetto; Yulia Galagan; Mariadriana Creatore; Gianluca Coletti; Paul Poodt; Sjoerd Veenstra; Ronn Andriessen; Francesco DI Giacomo; Dong Zhang; Claire Burgess; Wiljan Verhees; Henri Fledderus; Ilker Dogan; Mehrdad Najafi; Herbert Lifka

doi:10.1109/PVSC40753.2019.8981217

Towards large area stable perovskite solar cells and modules

Valerio Zardetto
, Yulia Galagan
, Mariadriana Creatore
, Gianluca Coletti
, Paul Poodt
, Sjoerd Veenstra
, Ronn Andriessen
, Francesco DI Giacomo
, Dong Zhang
, Claire Burgess
, Wiljan Verhees
, Henri Fledderus
, Ilker Dogan
, Mehrdad Najafi
, Herbert Lifka

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

3 Citaten (Scopus)

Samenvatting

In order to commercialize the perovskite solar cells (PSC) technology, efficient and industrial deposition methods over large areas have to be adopted, and the device architectures have to provide long term stability. In this work we combine several upscalable deposition methods to develop a stable semitransparent PSC. The control of the uniformity of perovskite crystallization by tailoring the ink formulation and the drying process was pursued in order to drastically reduce the efficiency losses over an area increase of 3 orders of magnitude (from 0.04 to 100 cm²). When adopting sputtered ITO as top electrode, the stack retains up to 90% of the initial performance after 1000hrs at 85 °C. The use of laser patterning to define P1 P2 and P3 scribes for series interconnected modules enables the fabrication of thermally stable minimodule (4cm²) and large module (100cm²). Finally an outlook on the use of the perovskite device as top cell in a 4T tandem architecture with commercial c-Si cells will be provided.

Originele taal-2	Engels
Titel	2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	838-840
Aantal pagina's	3
ISBN van elektronische versie	9781728104942
DOI's	https://doi.org/10.1109/PVSC40753.2019.8981217
Status	Gepubliceerd - jun. 2019
Evenement	46th IEEE Photovoltaic Specialists Conference, PVSC 2019 - Chicago, Verenigde Staten van Amerika Duur: 16 jun. 2019 → 21 jun. 2019

Congres

Congres	46th IEEE Photovoltaic Specialists Conference, PVSC 2019
Land/Regio	Verenigde Staten van Amerika
Stad	Chicago
Periode	16/06/19 → 21/06/19

Financiering

This work has been supported by Solliance, a partnership of R&D organizations from the Netherlands, Belgium, and Germany working in thin film photovoltaic solar energy. This work also has been supported by the project “PV OpMaat”. We also acknowledge the Dutch Ministry of Economic Affairs, via The Top-consortia Knowledge and Innovation (TKI) Programs “High-Efficiency Si Perovskite Tandem Solar Cells” (TEUE116193).

Toegang tot document

10.1109/PVSC40753.2019.8981217

Andere bestanden en links

Link to publication in Scopus

Citeer dit

Zardetto, V., Galagan, Y., Creatore, M., Coletti, G., Poodt, P., Veenstra, S., Andriessen, R., DI Giacomo, F., Zhang, D., Burgess, C., Verhees, W., Fledderus, H., Dogan, I., Najafi, M., & Lifka, H. (2019). Towards large area stable perovskite solar cells and modules. In 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019 (blz. 838-840). Artikel 8981217 Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/PVSC40753.2019.8981217

@inproceedings{6af5d9eb1260466e937829ccd7da8def,

title = "Towards large area stable perovskite solar cells and modules",

abstract = "In order to commercialize the perovskite solar cells (PSC) technology, efficient and industrial deposition methods over large areas have to be adopted, and the device architectures have to provide long term stability. In this work we combine several upscalable deposition methods to develop a stable semitransparent PSC. The control of the uniformity of perovskite crystallization by tailoring the ink formulation and the drying process was pursued in order to drastically reduce the efficiency losses over an area increase of 3 orders of magnitude (from 0.04 to 100 cm2). When adopting sputtered ITO as top electrode, the stack retains up to 90\% of the initial performance after 1000hrs at 85 °C. The use of laser patterning to define P1 P2 and P3 scribes for series interconnected modules enables the fabrication of thermally stable minimodule (4cm2) and large module (100cm2). Finally an outlook on the use of the perovskite device as top cell in a 4T tandem architecture with commercial c-Si cells will be provided.",

keywords = "atomic layer deposition, large area, module, perovskite, slot die coating",

author = "Valerio Zardetto and Yulia Galagan and Mariadriana Creatore and Gianluca Coletti and Paul Poodt and Sjoerd Veenstra and Ronn Andriessen and \{DI Giacomo\}, Francesco and Dong Zhang and Claire Burgess and Wiljan Verhees and Henri Fledderus and Ilker Dogan and Mehrdad Najafi and Herbert Lifka",

year = "2019",

month = jun,

doi = "10.1109/PVSC40753.2019.8981217",

language = "English",

pages = "838--840",

booktitle = "2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "46th IEEE Photovoltaic Specialists Conference, PVSC 2019 ; Conference date: 16-06-2019 Through 21-06-2019",

}

Zardetto, V, Galagan, Y, Creatore, M, Coletti, G, Poodt, P, Veenstra, S, Andriessen, R, DI Giacomo, F, Zhang, D, Burgess, C, Verhees, W, Fledderus, H, Dogan, I, Najafi, M & Lifka, H 2019, Towards large area stable perovskite solar cells and modules. in 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019., 8981217, Institute of Electrical and Electronics Engineers, Piscataway, blz. 838-840, 46th IEEE Photovoltaic Specialists Conference, PVSC 2019, Chicago, Verenigde Staten van Amerika, 16/06/19. https://doi.org/10.1109/PVSC40753.2019.8981217

Towards large area stable perovskite solar cells and modules. / Zardetto, Valerio; Galagan, Yulia; Creatore, Mariadriana et al.
2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019. Piscataway: Institute of Electrical and Electronics Engineers, 2019. blz. 838-840 8981217.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Towards large area stable perovskite solar cells and modules

AU - Zardetto, Valerio

AU - Galagan, Yulia

AU - Creatore, Mariadriana

AU - Coletti, Gianluca

AU - Poodt, Paul

AU - Veenstra, Sjoerd

AU - Andriessen, Ronn

AU - DI Giacomo, Francesco

AU - Zhang, Dong

AU - Burgess, Claire

AU - Verhees, Wiljan

AU - Fledderus, Henri

AU - Dogan, Ilker

AU - Najafi, Mehrdad

AU - Lifka, Herbert

PY - 2019/6

Y1 - 2019/6

N2 - In order to commercialize the perovskite solar cells (PSC) technology, efficient and industrial deposition methods over large areas have to be adopted, and the device architectures have to provide long term stability. In this work we combine several upscalable deposition methods to develop a stable semitransparent PSC. The control of the uniformity of perovskite crystallization by tailoring the ink formulation and the drying process was pursued in order to drastically reduce the efficiency losses over an area increase of 3 orders of magnitude (from 0.04 to 100 cm2). When adopting sputtered ITO as top electrode, the stack retains up to 90% of the initial performance after 1000hrs at 85 °C. The use of laser patterning to define P1 P2 and P3 scribes for series interconnected modules enables the fabrication of thermally stable minimodule (4cm2) and large module (100cm2). Finally an outlook on the use of the perovskite device as top cell in a 4T tandem architecture with commercial c-Si cells will be provided.

AB - In order to commercialize the perovskite solar cells (PSC) technology, efficient and industrial deposition methods over large areas have to be adopted, and the device architectures have to provide long term stability. In this work we combine several upscalable deposition methods to develop a stable semitransparent PSC. The control of the uniformity of perovskite crystallization by tailoring the ink formulation and the drying process was pursued in order to drastically reduce the efficiency losses over an area increase of 3 orders of magnitude (from 0.04 to 100 cm2). When adopting sputtered ITO as top electrode, the stack retains up to 90% of the initial performance after 1000hrs at 85 °C. The use of laser patterning to define P1 P2 and P3 scribes for series interconnected modules enables the fabrication of thermally stable minimodule (4cm2) and large module (100cm2). Finally an outlook on the use of the perovskite device as top cell in a 4T tandem architecture with commercial c-Si cells will be provided.

KW - atomic layer deposition

KW - large area

KW - module

KW - perovskite

KW - slot die coating

UR - https://www.scopus.com/pages/publications/85081582171

U2 - 10.1109/PVSC40753.2019.8981217

DO - 10.1109/PVSC40753.2019.8981217

M3 - Conference contribution

AN - SCOPUS:85081582171

SP - 838

EP - 840

BT - 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - 46th IEEE Photovoltaic Specialists Conference, PVSC 2019

Y2 - 16 June 2019 through 21 June 2019

ER -

Towards large area stable perovskite solar cells and modules

Samenvatting

Congres

Financiering

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit