Thermoplastic, rubber-like marine antifouling coatings with micro-structures via mechanical embossing

Tom Bus, Marie L. Dale, Kevin J. Reynolds, Cees W.M. Bastiaansen (Corresponding author)

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

3 Citaten (Scopus)
24 Downloads (Pure)

Samenvatting

New processing routes and materials for non-biocidal, antifouling (AF) coatings with an improved performance are currently much sought after for a range of marine applications. Here, the processing, physical properties and marine AF performance of a fluorinated coating based on a thermoplastic (non-crosslinked) fluorinated polymer are reported. It was found that the addition of lubricating oil and hydrodynamic drag reducing microstructures improved the AF properties substantially, i.e. the settlement of a marine biofilm, containing mixed microalgae including diatoms, was reduced to low levels. More importantly, the remaining fouling was removed from the coatings at low hydrodynamic shear rates and promising AF properties were obtained. Moreover, additional potential benefits were revealed originating from the thermoplastic nature of the coating material which might result in significant cost reductions.

Originele taal-2Engels
Pagina's (van-tot)138-145
Aantal pagina's8
TijdschriftBiofouling
Volume36
Nummer van het tijdschrift2
DOI's
StatusGepubliceerd - 7 feb 2020

Vingerafdruk Duik in de onderzoeksthema's van 'Thermoplastic, rubber-like marine antifouling coatings with micro-structures via mechanical embossing'. Samen vormen ze een unieke vingerafdruk.

Citeer dit