Spong3d : 3D printed facade system enabling movable fluid heat storage

V. Sarakinioti; M. Turrin; M. Teeling; P. De Ruiter; M. Van Erk; M. Tenpierik; T. Konstantinou; U. Knaack; A.D.C. Pronk; P.M. Teuffel; Arthur J. van Lier; Rens L.G. Vorstermans; E. Dolkemade; M.L. de Klijn; R.C.G.M. Loonen; J.L.M. Hensen; D. Vlasblom

doi:10.7480/spool.2017.2.1929

Spong3d : 3D printed facade system enabling movable fluid heat storage

V. Sarakinioti, M. Turrin, M. Teeling, P. De Ruiter, M. Van Erk, M. Tenpierik, T. Konstantinou, U. Knaack, A.D.C. Pronk, P.M. Teuffel, Arthur J. van Lier, Rens L.G. Vorstermans, E. Dolkemade, M.L. de Klijn, R.C.G.M. Loonen, J.L.M. Hensen, D. Vlasblom

Onderzoeksoutput: Bijdrage aan tijdschrift › Tijdschriftartikel › Academic › peer review

457 Downloads (Pure)

Samenvatting

Spong3D is an adaptive 3D printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed system incorporates air cavities to provide thermal insulation and a movable liquid (water plus additives) to provide heat storage where and whenever needed. The air cavities have various dimensions and are located in the inner part of the system. The movable liquid provides heat storage as it flows through channels located along the outer surfaces of the system (on the indoor and outdoor faces of the façade). Together, the composition of the channels and the cavities form a complex structure, integrating multiple functions into a singular component, which can only be produced by using an Additive Manufacturing (AM; like 3D printing) technology.

Originele taal-2	Engels
Pagina's (van-tot)	57-60
Tijdschrift	Spool
Volume	4
Nummer van het tijdschrift	2
DOI's	https://doi.org/10.7480/spool.2017.2.1929
Status	Gepubliceerd - dec. 2017

Toegang tot document

10.7480/spool.2017.2.1929Licentie: CC BY

publishers versionDefinitieve gepubliceerde versie, 1,5 MB

Citeer dit

Sarakinioti, V., Turrin, M., Teeling, M., De Ruiter, P., Van Erk, M., Tenpierik, M., Konstantinou, T., Knaack, U., Pronk, A. D. C., Teuffel, P. M., van Lier, A. J., Vorstermans, R. L. G., Dolkemade, E., de Klijn, M. L., Loonen, R. C. G. M., Hensen, J. L. M., & Vlasblom, D. (2017). Spong3d : 3D printed facade system enabling movable fluid heat storage. Spool, 4(2), 57-60. https://doi.org/10.7480/spool.2017.2.1929

@article{d152bc4f26e84eacbab0ad66f71d4d4c,

title = "Spong3d : 3D printed facade system enabling movable fluid heat storage",

abstract = "Spong3D is an adaptive 3D printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed system incorporates air cavities to provide thermal insulation and a movable liquid (water plus additives) to provide heat storage where and whenever needed. The air cavities have various dimensions and are located in the inner part of the system. The movable liquid provides heat storage as it flows through channels located along the outer surfaces of the system (on the indoor and outdoor faces of the fa{\c c}ade). Together, the composition of the channels and the cavities form a complex structure, integrating multiple functions into a singular component, which can only be produced by using an Additive Manufacturing (AM; like 3D printing) technology.",

author = "V. Sarakinioti and M. Turrin and M. Teeling and {De Ruiter}, P. and {Van Erk}, M. and M. Tenpierik and T. Konstantinou and U. Knaack and A.D.C. Pronk and P.M. Teuffel and {van Lier}, {Arthur J.} and Vorstermans, {Rens L.G.} and E. Dolkemade and {de Klijn}, M.L. and R.C.G.M. Loonen and J.L.M. Hensen and D. Vlasblom",

year = "2017",

month = dec,

doi = "10.7480/spool.2017.2.1929",

language = "English",

volume = "4",

pages = "57--60",

journal = "Spool",

issn = "2215-0897",

publisher = "TU Delft Open",

number = "2",

}

Sarakinioti, V, Turrin, M, Teeling, M, De Ruiter, P, Van Erk, M, Tenpierik, M, Konstantinou, T, Knaack, U, Pronk, ADC, Teuffel, PM, van Lier, AJ, Vorstermans, RLG, Dolkemade, E, de Klijn, ML, Loonen, RCGM , Hensen, JLM & Vlasblom, D 2017, 'Spong3d : 3D printed facade system enabling movable fluid heat storage', Spool, vol. 4, nr. 2, blz. 57-60. https://doi.org/10.7480/spool.2017.2.1929

TY - JOUR

T1 - Spong3d : 3D printed facade system enabling movable fluid heat storage

AU - Sarakinioti, V.

AU - Turrin, M.

AU - Teeling, M.

AU - De Ruiter, P.

AU - Van Erk, M.

AU - Tenpierik, M.

AU - Konstantinou, T.

AU - Knaack, U.

AU - Pronk, A.D.C.

AU - Teuffel, P.M.

AU - van Lier, Arthur J.

AU - Vorstermans, Rens L.G.

AU - Dolkemade, E.

AU - de Klijn, M.L.

AU - Loonen, R.C.G.M.

AU - Hensen, J.L.M.

AU - Vlasblom, D.

PY - 2017/12

Y1 - 2017/12

N2 - Spong3D is an adaptive 3D printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed system incorporates air cavities to provide thermal insulation and a movable liquid (water plus additives) to provide heat storage where and whenever needed. The air cavities have various dimensions and are located in the inner part of the system. The movable liquid provides heat storage as it flows through channels located along the outer surfaces of the system (on the indoor and outdoor faces of the façade). Together, the composition of the channels and the cavities form a complex structure, integrating multiple functions into a singular component, which can only be produced by using an Additive Manufacturing (AM; like 3D printing) technology.

AB - Spong3D is an adaptive 3D printed facade system that integrates multiple functions to optimize thermal performances according to the different environmental conditions throughout the year. The proposed system incorporates air cavities to provide thermal insulation and a movable liquid (water plus additives) to provide heat storage where and whenever needed. The air cavities have various dimensions and are located in the inner part of the system. The movable liquid provides heat storage as it flows through channels located along the outer surfaces of the system (on the indoor and outdoor faces of the façade). Together, the composition of the channels and the cavities form a complex structure, integrating multiple functions into a singular component, which can only be produced by using an Additive Manufacturing (AM; like 3D printing) technology.

U2 - 10.7480/spool.2017.2.1929

DO - 10.7480/spool.2017.2.1929

M3 - Article

SN - 2215-0897

VL - 4

SP - 57

EP - 60

JO - Spool

JF - Spool

IS - 2

ER -

Spong3d : 3D printed facade system enabling movable fluid heat storage

Samenvatting

Toegang tot document

Vingerafdruk

Citeer dit