Smart self-interference suppression by exploiting a nonlinearity

E.J.G. Janssen, H. Habibi, D. Milosevic, P.G.M. Baltus, A.H.M. Roermund, van

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureHoofdstukAcademic

1 Downloads (Pure)

Samenvatting

A 1.8GHz RF amplifier implemented in 0.14um CMOS with frequency-independent blocker suppression is presented. The blocker suppression functionality is obtained by the adaptation of a nonlinear input–output transfer according to the blocker amplitude. Since superposition does not apply to nonlinear transfer functions, the behavior of such a transfer for strong undesired signals is different from the behavior for weak desired signals, which is exploited here. In the presence of a 0 to +11 dBm RF blocker, a voltage gain for weak signals of respectively 7.6–9.4 dB and IIP3 >4 dBm are measured, while the blocker is suppressed by more than 35 dB. In case of no blocker present at the input, the circuit is set to amplifier mode providing 17 dB of voltage gain and an IIP3 of 6.6 dBm while consuming 3 mW. Application areas are coexistence in multi-radio devices and dealing with TX leakage in FDD systems.
Originele taal-2Engels
TitelFrequency references, power management for SoC, and smart wireless interfaces : advances in analog circuit design 2013
RedacteurenA. Baschirotto, K.A.A. Makinwa, P.J.A. Harpe
Plaats van productieDordrecht
UitgeverijSpringer
Pagina's249-263
ISBN van geprinte versie978-3-319-01079-3
DOI's
StatusGepubliceerd - 2013

Vingerafdruk Duik in de onderzoeksthema's van 'Smart self-interference suppression by exploiting a nonlinearity'. Samen vormen ze een unieke vingerafdruk.

Citeer dit