Shock-induced borehole waves and fracture effects

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

Uittreksel

We perform wave experiments using a vertical shock tube setup. Shock waves are generated by the rupture of a thin membrane. In the test section the incident pressure waves generate borehole-guided waves along water-saturated samples. The tube is equipped with side wall gages and a mobile pressure probe, so that the attenuation and reflection of the wave can be measured. The computation for a single horizontal fracture intersecting a vertical borehole gives a quantitative prediction of reflection and transmission of borehole-guided waves. Three different fracture apertures are used for the calculation. Fracture aperture significantly affects both reflection and transmission coefficients. Large fractures increase reflectivity and decrease transmissivity. In the experiment, we found that both pressures above and below the fracture are influenced by the fracture aperture indeed, thus indicating the potential for fracture detection by borehole waves
Originele taal-2Engels
Pagina's (van-tot)263-270
TijdschriftTransport in Porous Media
Volume93
Nummer van het tijdschrift2
DOI's
StatusGepubliceerd - 2012

Vingerafdruk

Boreholes
Guided electromagnetic wave propagation
Shock tubes
Wave transmission
Shock waves
Gages
Experiments
Membranes
Water

Citeer dit

@article{8d5393f77fb148c9b73f994531d773f9,
title = "Shock-induced borehole waves and fracture effects",
abstract = "We perform wave experiments using a vertical shock tube setup. Shock waves are generated by the rupture of a thin membrane. In the test section the incident pressure waves generate borehole-guided waves along water-saturated samples. The tube is equipped with side wall gages and a mobile pressure probe, so that the attenuation and reflection of the wave can be measured. The computation for a single horizontal fracture intersecting a vertical borehole gives a quantitative prediction of reflection and transmission of borehole-guided waves. Three different fracture apertures are used for the calculation. Fracture aperture significantly affects both reflection and transmission coefficients. Large fractures increase reflectivity and decrease transmissivity. In the experiment, we found that both pressures above and below the fracture are influenced by the fracture aperture indeed, thus indicating the potential for fracture detection by borehole waves",
author = "H. Fan and D.M.J. Smeulders",
year = "2012",
doi = "10.1007/s11242-012-9963-6",
language = "English",
volume = "93",
pages = "263--270",
journal = "Transport in Porous Media",
issn = "0169-3913",
publisher = "Springer",
number = "2",

}

Shock-induced borehole waves and fracture effects. / Fan, H.; Smeulders, D.M.J.

In: Transport in Porous Media, Vol. 93, Nr. 2, 2012, blz. 263-270.

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

TY - JOUR

T1 - Shock-induced borehole waves and fracture effects

AU - Fan, H.

AU - Smeulders, D.M.J.

PY - 2012

Y1 - 2012

N2 - We perform wave experiments using a vertical shock tube setup. Shock waves are generated by the rupture of a thin membrane. In the test section the incident pressure waves generate borehole-guided waves along water-saturated samples. The tube is equipped with side wall gages and a mobile pressure probe, so that the attenuation and reflection of the wave can be measured. The computation for a single horizontal fracture intersecting a vertical borehole gives a quantitative prediction of reflection and transmission of borehole-guided waves. Three different fracture apertures are used for the calculation. Fracture aperture significantly affects both reflection and transmission coefficients. Large fractures increase reflectivity and decrease transmissivity. In the experiment, we found that both pressures above and below the fracture are influenced by the fracture aperture indeed, thus indicating the potential for fracture detection by borehole waves

AB - We perform wave experiments using a vertical shock tube setup. Shock waves are generated by the rupture of a thin membrane. In the test section the incident pressure waves generate borehole-guided waves along water-saturated samples. The tube is equipped with side wall gages and a mobile pressure probe, so that the attenuation and reflection of the wave can be measured. The computation for a single horizontal fracture intersecting a vertical borehole gives a quantitative prediction of reflection and transmission of borehole-guided waves. Three different fracture apertures are used for the calculation. Fracture aperture significantly affects both reflection and transmission coefficients. Large fractures increase reflectivity and decrease transmissivity. In the experiment, we found that both pressures above and below the fracture are influenced by the fracture aperture indeed, thus indicating the potential for fracture detection by borehole waves

U2 - 10.1007/s11242-012-9963-6

DO - 10.1007/s11242-012-9963-6

M3 - Article

VL - 93

SP - 263

EP - 270

JO - Transport in Porous Media

JF - Transport in Porous Media

SN - 0169-3913

IS - 2

ER -