Requirements specification for multi-domain LED compact model development in Delphi4LED

A. Alexeev; R. Bornoff; S. Lungten; G. Martin; G. Onushkin; A. Poppe; M. Rencz; J. Yu

doi:10.1109/EuroSimE.2017.7926296

Requirements specification for multi-domain LED compact model development in Delphi4LED

A. Alexeev, R. Bornoff, S. Lungten, G. Martin, G. Onushkin, A. Poppe, M. Rencz, J. Yu

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

12 Citaten (Scopus)

17 Downloads (Pure)

Samenvatting

Light-emitting diode (LED) technology has been rapidly developing due to high energy efficiency and longer lifetimes of LED luminaires. One of the main challenges in designing LED components is to manage the inter-twined relation between thermal, electrical, and optical performances. These dependencies are required to be well understood in order to operate LEDs efficiently and have accurate performance prediction at different levels of the product value chain. Delphi4LED project aims at developing standardised method to create multi-domain (thermal, electrical, and optical) compact models from the measurement data. To obtain highly reliable and representative data sets via characterisation and calibration, end-user requirements specification for diverse LED samples are needed. In this paper, we report the lists of LED parameters and components selected for measurements, simulation and calibration considering end-user needs. We also show some of the methodologies for compact thermal model development that are recommended in Delphi4LED, followed by definition of simulation benchmark problems.

Originele taal-2	Engels
Titel	2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Aantal pagina's	8
ISBN van elektronische versie	978-1-5090-4344-6
ISBN van geprinte versie	978-1-5090-4345-3
DOI's	https://doi.org/10.1109/EuroSimE.2017.7926296
Status	Gepubliceerd - 10 mei 2017
Evenement	18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017 - Dresden, Duitsland Duur: 3 apr. 2017 → 5 apr. 2017

Congres

Congres	18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017
Land/Regio	Duitsland
Stad	Dresden
Periode	3/04/17 → 5/04/17

Duurzame ontwikkelingsdoelstellingen van de VN

Deze output draagt bij aan de volgende duurzame ontwikkelingsdoelstelling(en)

Toegang tot document

10.1109/EuroSimE.2017.7926296

Andere bestanden en links

Link to publication in Scopus

Citeer dit

Alexeev, A., Bornoff, R., Lungten, S., Martin, G., Onushkin, G., Poppe, A., Rencz, M., & Yu, J. (2017). Requirements specification for multi-domain LED compact model development in Delphi4LED. In 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017 Artikel 7926296 Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/EuroSimE.2017.7926296

@inproceedings{d65999d65fa242428ff634bd11690d60,

title = "Requirements specification for multi-domain LED compact model development in Delphi4LED",

abstract = "Light-emitting diode (LED) technology has been rapidly developing due to high energy efficiency and longer lifetimes of LED luminaires. One of the main challenges in designing LED components is to manage the inter-twined relation between thermal, electrical, and optical performances. These dependencies are required to be well understood in order to operate LEDs efficiently and have accurate performance prediction at different levels of the product value chain. Delphi4LED project aims at developing standardised method to create multi-domain (thermal, electrical, and optical) compact models from the measurement data. To obtain highly reliable and representative data sets via characterisation and calibration, end-user requirements specification for diverse LED samples are needed. In this paper, we report the lists of LED parameters and components selected for measurements, simulation and calibration considering end-user needs. We also show some of the methodologies for compact thermal model development that are recommended in Delphi4LED, followed by definition of simulation benchmark problems.",

keywords = "Light emitting diodes, Lighting, Electronic packaging thermal management, Temperature measurement, Thermal resistance, Reliability",

author = "A. Alexeev and R. Bornoff and S. Lungten and G. Martin and G. Onushkin and A. Poppe and M. Rencz and J. Yu",

year = "2017",

month = may,

day = "10",

doi = "10.1109/EuroSimE.2017.7926296",

language = "English",

isbn = "978-1-5090-4345-3",

booktitle = "2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017 ; Conference date: 03-04-2017 Through 05-04-2017",

}

Alexeev, A, Bornoff, R, Lungten, S, Martin, G, Onushkin, G, Poppe, A, Rencz, M & Yu, J 2017, Requirements specification for multi-domain LED compact model development in Delphi4LED. in 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017., 7926296, Institute of Electrical and Electronics Engineers, Piscataway, 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017, Dresden, Duitsland, 3/04/17. https://doi.org/10.1109/EuroSimE.2017.7926296

Requirements specification for multi-domain LED compact model development in Delphi4LED. / Alexeev, A.; Bornoff, R.; Lungten, S. et al.
2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. Piscataway: Institute of Electrical and Electronics Engineers, 2017. 7926296.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Requirements specification for multi-domain LED compact model development in Delphi4LED

AU - Alexeev, A.

AU - Bornoff, R.

AU - Lungten, S.

AU - Martin, G.

AU - Onushkin, G.

AU - Poppe, A.

AU - Rencz, M.

AU - Yu, J.

PY - 2017/5/10

Y1 - 2017/5/10

N2 - Light-emitting diode (LED) technology has been rapidly developing due to high energy efficiency and longer lifetimes of LED luminaires. One of the main challenges in designing LED components is to manage the inter-twined relation between thermal, electrical, and optical performances. These dependencies are required to be well understood in order to operate LEDs efficiently and have accurate performance prediction at different levels of the product value chain. Delphi4LED project aims at developing standardised method to create multi-domain (thermal, electrical, and optical) compact models from the measurement data. To obtain highly reliable and representative data sets via characterisation and calibration, end-user requirements specification for diverse LED samples are needed. In this paper, we report the lists of LED parameters and components selected for measurements, simulation and calibration considering end-user needs. We also show some of the methodologies for compact thermal model development that are recommended in Delphi4LED, followed by definition of simulation benchmark problems.

AB - Light-emitting diode (LED) technology has been rapidly developing due to high energy efficiency and longer lifetimes of LED luminaires. One of the main challenges in designing LED components is to manage the inter-twined relation between thermal, electrical, and optical performances. These dependencies are required to be well understood in order to operate LEDs efficiently and have accurate performance prediction at different levels of the product value chain. Delphi4LED project aims at developing standardised method to create multi-domain (thermal, electrical, and optical) compact models from the measurement data. To obtain highly reliable and representative data sets via characterisation and calibration, end-user requirements specification for diverse LED samples are needed. In this paper, we report the lists of LED parameters and components selected for measurements, simulation and calibration considering end-user needs. We also show some of the methodologies for compact thermal model development that are recommended in Delphi4LED, followed by definition of simulation benchmark problems.

KW - Light emitting diodes, Lighting, Electronic packaging thermal management, Temperature measurement, Thermal resistance, Reliability

UR - http://www.scopus.com/inward/record.url?scp=85020226538&partnerID=8YFLogxK

U2 - 10.1109/EuroSimE.2017.7926296

DO - 10.1109/EuroSimE.2017.7926296

M3 - Conference contribution

SN - 978-1-5090-4345-3

BT - 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017

Y2 - 3 April 2017 through 5 April 2017

ER -

Alexeev A, Bornoff R, Lungten S, Martin G, Onushkin G, Poppe A et al. Requirements specification for multi-domain LED compact model development in Delphi4LED. In 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. Piscataway: Institute of Electrical and Electronics Engineers. 2017. 7926296 doi: 10.1109/EuroSimE.2017.7926296

Requirements specification for multi-domain LED compact model development in Delphi4LED

Samenvatting

Congres

Duurzame ontwikkelingsdoelstellingen van de VN

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit