Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology

H.J. Visser; H. Pflug; S. Keyrouz

Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology

H.J. Visser, H. Pflug, S. Keyrouz

Electromagnetics

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

2 Downloads (Pure)

Samenvatting

To realize a sufficiently high dc voltage for a realistic load impedance with a rectenna we may increase the receiving aperture or employ a voltage boost circuit. A gridded, square loop FSS, loaded with Schottky diodes is demonstrated as an example of the first solution. For the second solution we have employed a Texas Instruments TI BQ22570 Power Management circuit combined with a miniaturized rectenna. This system has been capable of powering a sensor to distances in excess of 6m from a 915MHz, 3W EIRP source. The circuit, combined with a rectifier and 6dBi antenna is expected to deliver 60mW of power, during 40ms, every 2 minutes up to 10m from the source.

Originele taal-2	Engels
Titel	Proceedings of the 9th European Conference on Antennas and Propagation (EuCAP), 13-17 April 2015, Lisbon, Portugal
Plaats van productie	PIscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	1-4
Status	Gepubliceerd - 2015

Citeer dit

@inproceedings{a3b39cb6ac3849efbbd9fe58e57e4f40,

title = "Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology",

abstract = "To realize a sufficiently high dc voltage for a realistic load impedance with a rectenna we may increase the receiving aperture or employ a voltage boost circuit. A gridded, square loop FSS, loaded with Schottky diodes is demonstrated as an example of the first solution. For the second solution we have employed a Texas Instruments TI BQ22570 Power Management circuit combined with a miniaturized rectenna. This system has been capable of powering a sensor to distances in excess of 6m from a 915MHz, 3W EIRP source. The circuit, combined with a rectifier and 6dBi antenna is expected to deliver 60mW of power, during 40ms, every 2 minutes up to 10m from the source.",

author = "H.J. Visser and H. Pflug and S. Keyrouz",

year = "2015",

language = "English",

pages = "1--4",

booktitle = "Proceedings of the 9th European Conference on Antennas and Propagation (EuCAP), 13-17 April 2015, Lisbon, Portugal",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology. / Visser, H.J.; Pflug, H.; Keyrouz, S.
Proceedings of the 9th European Conference on Antennas and Propagation (EuCAP), 13-17 April 2015, Lisbon, Portugal. PIscataway: Institute of Electrical and Electronics Engineers, 2015. blz. 1-4.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology

AU - Visser, H.J.

AU - Pflug, H.

AU - Keyrouz, S.

PY - 2015

Y1 - 2015

N2 - To realize a sufficiently high dc voltage for a realistic load impedance with a rectenna we may increase the receiving aperture or employ a voltage boost circuit. A gridded, square loop FSS, loaded with Schottky diodes is demonstrated as an example of the first solution. For the second solution we have employed a Texas Instruments TI BQ22570 Power Management circuit combined with a miniaturized rectenna. This system has been capable of powering a sensor to distances in excess of 6m from a 915MHz, 3W EIRP source. The circuit, combined with a rectifier and 6dBi antenna is expected to deliver 60mW of power, during 40ms, every 2 minutes up to 10m from the source.

AB - To realize a sufficiently high dc voltage for a realistic load impedance with a rectenna we may increase the receiving aperture or employ a voltage boost circuit. A gridded, square loop FSS, loaded with Schottky diodes is demonstrated as an example of the first solution. For the second solution we have employed a Texas Instruments TI BQ22570 Power Management circuit combined with a miniaturized rectenna. This system has been capable of powering a sensor to distances in excess of 6m from a 915MHz, 3W EIRP source. The circuit, combined with a rectifier and 6dBi antenna is expected to deliver 60mW of power, during 40ms, every 2 minutes up to 10m from the source.

M3 - Conference contribution

SP - 1

EP - 4

BT - Proceedings of the 9th European Conference on Antennas and Propagation (EuCAP), 13-17 April 2015, Lisbon, Portugal

PB - Institute of Electrical and Electronics Engineers

CY - PIscataway

ER -

Rectenna demonstrators at Holst Centre / IMEC and Eindhoven University of Technology

Samenvatting

Vingerafdruk

Citeer dit