Printable Cement-Based Materials: Fresh Properties Measurements and Control

Timothy Wangler; Robert J. Flatt; Nicolas Roussel; Arnaud Perrot; Mohammed Sonebi; Rob Wolfs; Freek Bos; Dirk Lowke; Niklas Freund; Dietmar Stephan; Ursula Pott; Lex Reiter; Steffen Grünewald; Wilson Ricardo Leal da Silva; Geert De Schutter

doi:10.1007/978-3-030-90535-4_4

Printable Cement-Based Materials: Fresh Properties Measurements and Control

Timothy Wangler
, Robert J. Flatt
, Nicolas Roussel
, Arnaud Perrot
, Mohammed Sonebi
, Rob Wolfs
, Freek Bos
, Dirk Lowke
, Niklas Freund
, Dietmar Stephan
, Ursula Pott
, Lex Reiter
, Steffen Grünewald
, Wilson Ricardo Leal da Silva
, Geert De Schutter

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Hoofdstuk › Academic › peer review

12 Citaten (Scopus)

1 Downloads (Pure)

Samenvatting

Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

Originele taal-2	Engels
Titel	Digital Fabrication with Cement-Based Materials
Redacteuren	Nicolas Roussel, Dirk Lowke
Uitgeverij	Springer
Hoofdstuk	4
Pagina's	99-136
Aantal pagina's	38
ISBN van elektronische versie	978-3-030-90535-4
ISBN van geprinte versie	978-3-030-90534-7
DOI's	https://doi.org/10.1007/978-3-030-90535-4_4
Status	Gepubliceerd - jan. 2022

Publicatie series

Naam	RILEM State-of-the-Art Reports
Volume	36
ISSN van geprinte versie	2213-204X
ISSN van elektronische versie	2213-2031

Bibliografische nota

Publisher Copyright:
© 2022, RILEM.

Toegang tot document

10.1007/978-3-030-90535-4_4Licentie: Onbepaald

Andere bestanden en links

Link naar publicatie in Scopus

Citeer dit

Wangler, T., Flatt, R. J., Roussel, N., Perrot, A., Sonebi, M., Wolfs, R., Bos, F., Lowke, D., Freund, N., Stephan, D., Pott, U., Reiter, L., Grünewald, S., Silva, W. R. L. D., & De Schutter, G. (2022). Printable Cement-Based Materials: Fresh Properties Measurements and Control. In N. Roussel, & D. Lowke (editors), Digital Fabrication with Cement-Based Materials (blz. 99-136). (RILEM State-of-the-Art Reports; Vol. 36). Springer. https://doi.org/10.1007/978-3-030-90535-4_4

@inbook{8ce086fc9ca54ebf8a3d6b28deaaf01e,

title = "Printable Cement-Based Materials: Fresh Properties Measurements and Control",

abstract = "Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.",

author = "Timothy Wangler and Flatt, \{Robert J.\} and Nicolas Roussel and Arnaud Perrot and Mohammed Sonebi and Rob Wolfs and Freek Bos and Dirk Lowke and Niklas Freund and Dietmar Stephan and Ursula Pott and Lex Reiter and Steffen Gr{\"u}newald and Silva, \{Wilson Ricardo Leal da\} and \{De Schutter\}, Geert",

note = "Publisher Copyright: {\textcopyright} 2022, RILEM.",

year = "2022",

month = jan,

doi = "10.1007/978-3-030-90535-4\_4",

language = "English",

isbn = "978-3-030-90534-7",

series = "RILEM State-of-the-Art Reports",

publisher = "Springer",

pages = "99--136",

editor = "Nicolas Roussel and Dirk Lowke",

booktitle = "Digital Fabrication with Cement-Based Materials",

address = "Germany",

}

Wangler, T, Flatt, RJ, Roussel, N, Perrot, A, Sonebi, M, Wolfs, R, Bos, F, Lowke, D, Freund, N, Stephan, D, Pott, U, Reiter, L, Grünewald, S, Silva, WRLD & De Schutter, G 2022, Printable Cement-Based Materials: Fresh Properties Measurements and Control. in N Roussel & D Lowke (reds.), Digital Fabrication with Cement-Based Materials. RILEM State-of-the-Art Reports, vol. 36, Springer, blz. 99-136. https://doi.org/10.1007/978-3-030-90535-4_4

Printable Cement-Based Materials: Fresh Properties Measurements and Control. / Wangler, Timothy; Flatt, Robert J.; Roussel, Nicolas et al.
Digital Fabrication with Cement-Based Materials. reds. / Nicolas Roussel; Dirk Lowke. Springer, 2022. blz. 99-136 (RILEM State-of-the-Art Reports; Vol. 36).

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Hoofdstuk › Academic › peer review

TY - CHAP

T1 - Printable Cement-Based Materials

T2 - Fresh Properties Measurements and Control

AU - Wangler, Timothy

AU - Flatt, Robert J.

AU - Roussel, Nicolas

AU - Perrot, Arnaud

AU - Sonebi, Mohammed

AU - Wolfs, Rob

AU - Bos, Freek

AU - Lowke, Dirk

AU - Freund, Niklas

AU - Stephan, Dietmar

AU - Pott, Ursula

AU - Reiter, Lex

AU - Grünewald, Steffen

AU - Silva, Wilson Ricardo Leal da

AU - De Schutter, Geert

PY - 2022/1

Y1 - 2022/1

N2 - Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

AB - Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength evolution in order to guarantee process success. This chapter summarizes the state of the art in these characterization methods for digital fabrication with fresh cementitious materials, reviewing well-known and more recently developed methods.

UR - https://www.scopus.com/pages/publications/85123594412

U2 - 10.1007/978-3-030-90535-4_4

DO - 10.1007/978-3-030-90535-4_4

M3 - Chapter

AN - SCOPUS:85123594412

SN - 978-3-030-90534-7

T3 - RILEM State-of-the-Art Reports

SP - 99

EP - 136

BT - Digital Fabrication with Cement-Based Materials

A2 - Roussel, Nicolas

A2 - Lowke, Dirk

PB - Springer

ER -

Printable Cement-Based Materials: Fresh Properties Measurements and Control

Samenvatting

Publicatie series

Bibliografische nota

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit