Power cable joint modelin high frequency

Yan Li; Peter A A F Wouters; Paul Wagenaars; Peter C.J.M. van der Wielen; E. Fred Steennis

doi:10.1109/CMD.2012.6416243

Power cable joint modelin high frequency

Yan Li, Peter A A F Wouters, Paul Wagenaars, Peter C.J.M. van der Wielen, E. Fred Steennis

Electrical Energy Systems

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

4 Citaten (Scopus)

Samenvatting

Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz. It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

Originele taal-2	Engels
Titel	2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	76-79
Aantal pagina's	4
ISBN van elektronische versie	978-1-4673-1020-8
ISBN van geprinte versie	978-1-4673-1019-2
DOI's	https://doi.org/10.1109/CMD.2012.6416243
Status	Gepubliceerd - 1 dec. 2012
Evenement	2012 International Conference on Condition Monitoring and Diagnosis, CMD 2012 - Bali, Indonesië Duur: 23 sep. 2012 → 27 sep. 2012

Congres

Congres	2012 International Conference on Condition Monitoring and Diagnosis, CMD 2012
Land/Regio	Indonesië
Stad	Bali
Periode	23/09/12 → 27/09/12

Toegang tot document

10.1109/CMD.2012.6416243

Andere bestanden en links

Link to publication in Scopus

Citeer dit

@inproceedings{7fcca77730fe44349fbb9f5320b3817f,

title = "Power cable joint modelin high frequency",

abstract = "Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz. It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.",

keywords = "monitoring, parameter estimation, partial discharges, power cable insulation, transmission lines",

author = "Yan Li and Wouters, {Peter A A F} and Paul Wagenaars and {van der Wielen}, {Peter C.J.M.} and Steennis, {E. Fred}",

year = "2012",

month = dec,

day = "1",

doi = "10.1109/CMD.2012.6416243",

language = "English",

isbn = "978-1-4673-1019-2",

pages = "76--79",

booktitle = "2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "2012 International Conference on Condition Monitoring and Diagnosis, CMD 2012 ; Conference date: 23-09-2012 Through 27-09-2012",

}

Li, Y, Wouters, PAAF, Wagenaars, P, van der Wielen, PCJM & Steennis, EF 2012, Power cable joint modelin high frequency. in 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012., 6416243, Institute of Electrical and Electronics Engineers, Piscataway, blz. 76-79, 2012 International Conference on Condition Monitoring and Diagnosis, CMD 2012, Bali, Indonesië, 23/09/12. https://doi.org/10.1109/CMD.2012.6416243

Power cable joint modelin high frequency. / Li, Yan; Wouters, Peter A A F; Wagenaars, Paul et al.
2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012. Piscataway: Institute of Electrical and Electronics Engineers, 2012. blz. 76-79 6416243.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Power cable joint modelin high frequency

AU - Li, Yan

AU - Wouters, Peter A A F

AU - Wagenaars, Paul

AU - van der Wielen, Peter C.J.M.

AU - Steennis, E. Fred

PY - 2012/12/1

Y1 - 2012/12/1

N2 - Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz. It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

AB - Models in high frequency range for underground power cabling system are the basis for the analysis of many condition diagnostic techniques, for instance, partial discharge (PD) monitoring. This paper focuses on modeling of power cable joints. A cascaded transmission line model is proposed for 10kV oil-filled PILC-PILC straight power cable joint in thefrequency range of 300 kHz-800 MHz. It can be applied to interpret PD signal transmission and reflection behavior in power cable connections. The model is verified by S-parameter measurement.

KW - monitoring

KW - parameter estimation

KW - partial discharges

KW - power cable insulation

KW - transmission lines

UR - http://www.scopus.com/inward/record.url?scp=84874223222&partnerID=8YFLogxK

U2 - 10.1109/CMD.2012.6416243

DO - 10.1109/CMD.2012.6416243

M3 - Conference contribution

AN - SCOPUS:84874223222

SN - 978-1-4673-1019-2

SP - 76

EP - 79

BT - 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - 2012 International Conference on Condition Monitoring and Diagnosis, CMD 2012

Y2 - 23 September 2012 through 27 September 2012

ER -

Power cable joint modelin high frequency

Samenvatting

Congres

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit