Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design

H.J. Visser

doi:10.1109/LAPC.2012.6402945

Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design

H.J. Visser

Electromagnetics

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

9 Citaten (Scopus)

Samenvatting

For powering wireless sensors in buildings rechargeable batteries may be used, being charged remotely by dedicated RF sources. RF energy transport suffers from path loss and therefore the RF power available on a rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using this information to adapt the transmit antenna radiation pattern, the RF energy transport efficiency will be improved.

Originele taal-2	Engels
Titel	Proceedings of the 2012 Loughborough Antennas and Propagation Conference (LAPC), 12 - 13 November 2012, Loughborough, United Kingdom
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	1-8
ISBN van geprinte versie	978-1-4673-2219-5
DOI's	https://doi.org/10.1109/LAPC.2012.6402945
Status	Gepubliceerd - 2012
Evenement	8th Loughborough Antennas and Propagation Conference (LAPC 2012) - Loughboroufg, Verenigd Koninkrijk Duur: 12 nov. 2012 → 13 nov. 2012 Congresnummer: 8

Congres

Congres	8th Loughborough Antennas and Propagation Conference (LAPC 2012)
Verkorte titel	LAPC 2012
Land/Regio	Verenigd Koninkrijk
Stad	Loughboroufg
Periode	12/11/12 → 13/11/12
Ander	Loughborough Antennas and Propagation Conference

Toegang tot document

10.1109/LAPC.2012.6402945

Citeer dit

@inproceedings{ca63470f17ac49c5b412c9f4d37c58e0,

title = "Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design",

abstract = "For powering wireless sensors in buildings rechargeable batteries may be used, being charged remotely by dedicated RF sources. RF energy transport suffers from path loss and therefore the RF power available on a rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using this information to adapt the transmit antenna radiation pattern, the RF energy transport efficiency will be improved.",

author = "H.J. Visser",

year = "2012",

doi = "10.1109/LAPC.2012.6402945",

language = "English",

isbn = "978-1-4673-2219-5",

pages = "1--8",

booktitle = "Proceedings of the 2012 Loughborough Antennas and Propagation Conference (LAPC), 12 - 13 November 2012, Loughborough, United Kingdom",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "8th Loughborough Antennas and Propagation Conference (LAPC 2012), LAPC 2012 ; Conference date: 12-11-2012 Through 13-11-2012",

}

Visser, HJ 2012, Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design. in Proceedings of the 2012 Loughborough Antennas and Propagation Conference (LAPC), 12 - 13 November 2012, Loughborough, United Kingdom. Institute of Electrical and Electronics Engineers, Piscataway, blz. 1-8, 8th Loughborough Antennas and Propagation Conference (LAPC 2012), Loughboroufg, Verenigd Koninkrijk, 12/11/12. https://doi.org/10.1109/LAPC.2012.6402945

Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design. / Visser, H.J.
Proceedings of the 2012 Loughborough Antennas and Propagation Conference (LAPC), 12 - 13 November 2012, Loughborough, United Kingdom. Piscataway: Institute of Electrical and Electronics Engineers, 2012. blz. 1-8.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design

AU - Visser, H.J.

N1 - Conference code: 8

PY - 2012

Y1 - 2012

N2 - For powering wireless sensors in buildings rechargeable batteries may be used, being charged remotely by dedicated RF sources. RF energy transport suffers from path loss and therefore the RF power available on a rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using this information to adapt the transmit antenna radiation pattern, the RF energy transport efficiency will be improved.

AB - For powering wireless sensors in buildings rechargeable batteries may be used, being charged remotely by dedicated RF sources. RF energy transport suffers from path loss and therefore the RF power available on a rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using this information to adapt the transmit antenna radiation pattern, the RF energy transport efficiency will be improved.

U2 - 10.1109/LAPC.2012.6402945

DO - 10.1109/LAPC.2012.6402945

M3 - Conference contribution

SN - 978-1-4673-2219-5

SP - 1

EP - 8

BT - Proceedings of the 2012 Loughborough Antennas and Propagation Conference (LAPC), 12 - 13 November 2012, Loughborough, United Kingdom

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - 8th Loughborough Antennas and Propagation Conference (LAPC 2012)

Y2 - 12 November 2012 through 13 November 2012

ER -

Optimizing RF energy transport : channel modelling and transmit antenna and rectenna design

Samenvatting

Congres

Toegang tot document

Vingerafdruk

Citeer dit