TY - JOUR
T1 - NaAlO2 activated slag and MSWI bottom ash
T2 - Phase assemblages and thermodynamic assessment of long-term leaching behavior
AU - Liu, Tao
AU - Tang, Yanjie
AU - Ling, Xuan
AU - Stapper, J.L.
AU - Kunther, Wolfgang
AU - Yu, Qingliang
PY - 2024/9
Y1 - 2024/9
N2 - Long-term leaching (heavy metal ions) behavior of municipal solid waste incineration bottom ash (MSWI BA) is one of the issues limiting its application in alkali activated materials (AAMs). This study investigates NaAlO2 activated slag (partially replaced by MSWI BA) in terms of the reaction process and leaching behavior. A combined approach of experimental observation and thermodynamic modeling is utilized. The hardened pastes were evaluated by reaction kinetics, mineralogy, microstructure, strength, and leaching. The thermodynamic modeling included consideration of the raw materials chemistry and activator types. Results show that the modeled C(N)−A−S−H is in line with quantitative results. Specifically, modeled hydrotalcite content (3g/100g binder) is slightly higher than the experimental results (2g/100g binder) at 28 days. Furthermore, the uptake of Cu dramatically increases at 20 days by the generated C(N)−A−S−H gels, while the binding capacity of Sb, sulfates, and chlorides increases with the formation of hydrotalcite formation over time.
AB - Long-term leaching (heavy metal ions) behavior of municipal solid waste incineration bottom ash (MSWI BA) is one of the issues limiting its application in alkali activated materials (AAMs). This study investigates NaAlO2 activated slag (partially replaced by MSWI BA) in terms of the reaction process and leaching behavior. A combined approach of experimental observation and thermodynamic modeling is utilized. The hardened pastes were evaluated by reaction kinetics, mineralogy, microstructure, strength, and leaching. The thermodynamic modeling included consideration of the raw materials chemistry and activator types. Results show that the modeled C(N)−A−S−H is in line with quantitative results. Specifically, modeled hydrotalcite content (3g/100g binder) is slightly higher than the experimental results (2g/100g binder) at 28 days. Furthermore, the uptake of Cu dramatically increases at 20 days by the generated C(N)−A−S−H gels, while the binding capacity of Sb, sulfates, and chlorides increases with the formation of hydrotalcite formation over time.
KW - GGBS
KW - Leaching
KW - MSWI BA
KW - NaAlO activation
KW - Thermodynamic modeling
UR - http://www.scopus.com/inward/record.url?scp=85196020674&partnerID=8YFLogxK
U2 - 10.1016/j.cemconcomp.2024.105634
DO - 10.1016/j.cemconcomp.2024.105634
M3 - Article
AN - SCOPUS:85196020674
SN - 0958-9465
VL - 152
JO - Cement and Concrete Composites
JF - Cement and Concrete Composites
M1 - 105634
ER -