Multi-scale energy-based failure modelling of bond pad structures

O. Sluis, van der, R.B.R. Silfhout, van, R.A.B. Engelen, W.D. Driel, van, G.Q. Zhang

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review


Thermo-mechanical reliability issues have been identified as major bottlenecks in the development of future microelectronic components. This is caused by the following technology and business trends: (1) increasing miniaturisation, (2) introduction of new materials, (3) shorter time-to-market, (4) increasing design complexity and decreasing design margins, (5) shortened development and qualification times, (5) gap between technology and fundamental knowledge development [22]. It is now well established that for future CMOS-technologies (CMOS065 and beyond), low-k dielectric materials will be integrated in the back-end structures [8]. However, bad mechanical integrity as well as weak interfacial adhesion result in major thermo-mechanical reliability issues. Especially the forces resulting from packaging related processes such as dicing, wire bonding, bumping and molding are critical and can easily induce cracking, delamination and chipping of the IC back end structure when no appropriate development is performed [4]. The scope of this paper is on the development of numerical models that are able to predict the failuresensitivity of complex three-dimensional multi-layeredstructures while taking into account the details at the local scale of the microelectronic components by means of a multi-scale method. The damage sensitivity is calculated by means of an enhanced version of the previously introduced Area Release Energy (ARE) criterion. This enhancement results in an efficient and accurate prediction of the energy release rate (ERR) at a selected bimterial interface in any location. Moreover, due to the two-scale approach, local details of the structure are readily takeninto account. In order to evaluate the efficiency and accuracy of the proposed method, several two-dimensional and three-dimensional benchmarks will be simulated. The paper focusses on the enhanced ARE method, including several two- and three-dimensional benchmarks.
Originele taal-2Engels
TitelProceedings of the 8th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems (EuroSimE 2007)
Plaats van productieUnited Kingdom, London
StatusGepubliceerd - 2007


Duik in de onderzoeksthema's van 'Multi-scale energy-based failure modelling of bond pad structures'. Samen vormen ze een unieke vingerafdruk.

Citeer dit