Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing

A.G.P.U. Göschel; P.J.C.H. Cools

doi:10.1002/pen.11290

Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing

A.G.P.U. Göschel
, P.J.C.H. Cools

Onderzoeksoutput: Bijdrage aan tijdschrift › Tijdschriftartikel › Academic › peer review

1 Citaat (Scopus)

Samenvatting

The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection: concentration, viscosimetry, and light scattering, using HFIP as solvent. An increase in molar mass of PET due to post-polycondensation and/or transesterfication during drawing at a high temperature of 160 to 230°C was found. Moreover, drawing leads to crystallization and large orientation in the amorphous phase, which results in lower molecular mobility and prevents a further growth in chain length. Crazing under extreme drawing conditions occurs and affects a decrease in molar mass.

Originele taal-2	Engels
Pagina's (van-tot)	1596-1605
Aantal pagina's	9
Tijdschrift	Polymer Engineering & Science
Volume	40
Nummer van het tijdschrift	7
DOI's	https://doi.org/10.1002/pen.11290
Status	Gepubliceerd - 2000

Toegang tot document

10.1002/pen.11290

Citeer dit

@article{59b4a68cfef749d98af86029f9dbedfe,

title = "Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing",

abstract = "The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection: concentration, viscosimetry, and light scattering, using HFIP as solvent. An increase in molar mass of PET due to post-polycondensation and/or transesterfication during drawing at a high temperature of 160 to 230°C was found. Moreover, drawing leads to crystallization and large orientation in the amorphous phase, which results in lower molecular mobility and prevents a further growth in chain length. Crazing under extreme drawing conditions occurs and affects a decrease in molar mass.",

author = "A.G.P.U. G{\"o}schel and P.J.C.H. Cools",

year = "2000",

doi = "10.1002/pen.11290",

language = "English",

volume = "40",

pages = "1596--1605",

journal = "Polymer Engineering \& Science",

issn = "0032-3888",

publisher = "John Wiley and Sons Inc",

number = "7",

}

TY - JOUR

T1 - Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing

AU - Göschel, A.G.P.U.

AU - Cools, P.J.C.H.

PY - 2000

Y1 - 2000

N2 - The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection: concentration, viscosimetry, and light scattering, using HFIP as solvent. An increase in molar mass of PET due to post-polycondensation and/or transesterfication during drawing at a high temperature of 160 to 230°C was found. Moreover, drawing leads to crystallization and large orientation in the amorphous phase, which results in lower molecular mobility and prevents a further growth in chain length. Crazing under extreme drawing conditions occurs and affects a decrease in molar mass.

AB - The changes of the average molar mass Mw, Mn, Mz, and molar mass distributions during multistep uniaxial drawing of poly(ethylene terephthalate) (PET) to achieve ultimate mechanical properties have been studied in detail by means of size exclusion chromatography (SEC) with triple detection: concentration, viscosimetry, and light scattering, using HFIP as solvent. An increase in molar mass of PET due to post-polycondensation and/or transesterfication during drawing at a high temperature of 160 to 230°C was found. Moreover, drawing leads to crystallization and large orientation in the amorphous phase, which results in lower molecular mobility and prevents a further growth in chain length. Crazing under extreme drawing conditions occurs and affects a decrease in molar mass.

U2 - 10.1002/pen.11290

DO - 10.1002/pen.11290

M3 - Article

SN - 0032-3888

VL - 40

SP - 1596

EP - 1605

JO - Polymer Engineering & Science

JF - Polymer Engineering & Science

IS - 7

ER -

Molar-Mass of Poly(Ethylene-Terephthalate) (PET) During Ultimate Uniaxial Drawing

Samenvatting

Toegang tot document

Vingerafdruk

Citeer dit