Lumped-elements tunable frequency selective surfaces

S. Keyrouz; G. Perotto; H.J. Visser

doi:10.1109/EuCAP.2014.6901795

Lumped-elements tunable frequency selective surfaces

S. Keyrouz, G. Perotto, H.J. Visser

Electromagnetics

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

8 Citaten (Scopus)

642 Downloads (Pure)

Samenvatting

This paper presents an equivalent circuit model to predict the transmission and the reflection characteristics of different Frequency Selective Surfaces (FSS). The effect of the substrate thickness and permittivity are discussed. A Gridded-Square-Loop (GSL) loaded with lumped-elements is employed to tune the reflection and the transmission characteristics of the FSS. The design method is validated for different polarizations and for different incident angles. In order to tune the response of the FSS, lumped elements (R, L, C) can be inserted in the metallic conductive grid of the FSS. The waveguide simulator method and full-wave simulations are employed to validate the derived analytical equations.

Originele taal-2	Engels
Titel	Proceedings of the 8th European Conference on Antennas and Propagation (EuCAP 2014), 6-11 April 2014, The Hague, The Netherlands
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	475-478
DOI's	https://doi.org/10.1109/EuCAP.2014.6901795
Status	Gepubliceerd - 2014

Toegang tot document

10.1109/EuCAP.2014.6901795

publishers versionDefinitieve gepubliceerde versie, 371 KB

Citeer dit

@inproceedings{e3a0fe377be9443da5f2d58f8a06f878,

title = "Lumped-elements tunable frequency selective surfaces",

abstract = "This paper presents an equivalent circuit model to predict the transmission and the reflection characteristics of different Frequency Selective Surfaces (FSS). The effect of the substrate thickness and permittivity are discussed. A Gridded-Square-Loop (GSL) loaded with lumped-elements is employed to tune the reflection and the transmission characteristics of the FSS. The design method is validated for different polarizations and for different incident angles. In order to tune the response of the FSS, lumped elements (R, L, C) can be inserted in the metallic conductive grid of the FSS. The waveguide simulator method and full-wave simulations are employed to validate the derived analytical equations.",

author = "S. Keyrouz and G. Perotto and H.J. Visser",

year = "2014",

doi = "10.1109/EuCAP.2014.6901795",

language = "English",

pages = "475--478",

booktitle = "Proceedings of the 8th European Conference on Antennas and Propagation (EuCAP 2014), 6-11 April 2014, The Hague, The Netherlands",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Lumped-elements tunable frequency selective surfaces. / Keyrouz, S.; Perotto, G.; Visser, H.J.
Proceedings of the 8th European Conference on Antennas and Propagation (EuCAP 2014), 6-11 April 2014, The Hague, The Netherlands. Piscataway: Institute of Electrical and Electronics Engineers, 2014. blz. 475-478.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Lumped-elements tunable frequency selective surfaces

AU - Keyrouz, S.

AU - Perotto, G.

AU - Visser, H.J.

PY - 2014

Y1 - 2014

N2 - This paper presents an equivalent circuit model to predict the transmission and the reflection characteristics of different Frequency Selective Surfaces (FSS). The effect of the substrate thickness and permittivity are discussed. A Gridded-Square-Loop (GSL) loaded with lumped-elements is employed to tune the reflection and the transmission characteristics of the FSS. The design method is validated for different polarizations and for different incident angles. In order to tune the response of the FSS, lumped elements (R, L, C) can be inserted in the metallic conductive grid of the FSS. The waveguide simulator method and full-wave simulations are employed to validate the derived analytical equations.

AB - This paper presents an equivalent circuit model to predict the transmission and the reflection characteristics of different Frequency Selective Surfaces (FSS). The effect of the substrate thickness and permittivity are discussed. A Gridded-Square-Loop (GSL) loaded with lumped-elements is employed to tune the reflection and the transmission characteristics of the FSS. The design method is validated for different polarizations and for different incident angles. In order to tune the response of the FSS, lumped elements (R, L, C) can be inserted in the metallic conductive grid of the FSS. The waveguide simulator method and full-wave simulations are employed to validate the derived analytical equations.

U2 - 10.1109/EuCAP.2014.6901795

DO - 10.1109/EuCAP.2014.6901795

M3 - Conference contribution

SP - 475

EP - 478

BT - Proceedings of the 8th European Conference on Antennas and Propagation (EuCAP 2014), 6-11 April 2014, The Hague, The Netherlands

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Lumped-elements tunable frequency selective surfaces

Samenvatting

Toegang tot document

Vingerafdruk

Citeer dit