Linking process control and scheduling in an oil refinery

E. Zondervan, J.D.J. Hoekstra, S.D.P. Flapper, A.B. Haan, de

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

2 Downloads (Pure)

Samenvatting

In earlier work we have developed and tested a scheduling [4] and planning model [5] in the AIMMS software. In this follow-up contribution we will develop a model that can be used to blend crudes from the storage tanks to the right API's required for the CDU's. This so called control level model optimizes the refinery activities at a shorter time scale than the scheduling model, typically at the minutes to hour scales. We will make a first step to identify the information flow between the scheduling model and the control level model. Especially the development of the crude oil layering constraints in the tanks is brought under the attention. With case studies we further demonstrate how the model works.
Originele taal-2Engels
TitelProceedings of the 22nd European Engineering Symposium on Computer Aided Process Engineering, 17 - 20 June 2012, London.
RedacteurenI.D.L. Bogle, M. Fairweather
UitgeverijElsevier
Pagina's887-891
ISBN van geprinte versie978-0-444-59431-0
StatusGepubliceerd - 2012
EvenementESCAPE22, European Conference on Computer Aided Process Engineering, London, UK - University College, London, Verenigd Koninkrijk
Duur: 17 jun 201220 jun 2012
Congresnummer: 22

Publicatie series

NaamComputer Aided Chemical Engineering
Volume30
ISSN van geprinte versie1570-7946

Congres

CongresESCAPE22, European Conference on Computer Aided Process Engineering, London, UK
Verkorte titelESCAPE
LandVerenigd Koninkrijk
StadLondon
Periode17/06/1220/06/12
AnderESCAPE 22

Vingerafdruk Duik in de onderzoeksthema's van 'Linking process control and scheduling in an oil refinery'. Samen vormen ze een unieke vingerafdruk.

Citeer dit