Influence of the apex angle of coned shaped tubes on particulate fouling of heat exchangers

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

1 Downloads (Pure)

Samenvatting

A 2D cone shape has been added to the normal circular tubes of heat exchangers to minimize the area of stagnation and to stream line the air flow around the heat exchanger tubes. An experimental setup has been developed to study the influence of the apex angle of the cone shaped tubes on particulate fouling of heat exchangers. Fouling experiments have been performed in which calcium carbonate particles are injected during the experiments and the depositions of particles on the tubes of the heat exchanger is monitored. Four sets of experiments have been performed, in which normal cylindrical tubes and coned tubes with an apex angle of 60, 90 and 120 dgrs are examined. It was found that particulate fouling ceased if the apex angle of the cone shaped tubes is smaller than 90 dgrs. The attached cones enhance the flow around the tubes of the heat exchanger, i.e. by minimizing the stagnation area and keeping the flow attached to the tubes starting from the tip of the attached cone until separation, such that particles which deposit on the top of the tubes of the heat exchanger can be removed by the air flow.
Originele taal-2Engels
TitelProceedings of the International Conference on Heat Exchanger Fouling and Cleaning VIII - 2009, 14-19 June, 2009, Schladming, Austria
RedacteurenH. Mueller-Steinhagen, M.R. Malayeri
Pagina's200-208
StatusGepubliceerd - 2009
Evenementconference; International Conference on Heat Exchanger Fouling and Cleaning VIII - 2009, Schladming, Austria; 2009-06-14; 2009-06-19 -
Duur: 14 jun 200919 jun 2009

Congres

Congresconference; International Conference on Heat Exchanger Fouling and Cleaning VIII - 2009, Schladming, Austria; 2009-06-14; 2009-06-19
Periode14/06/0919/06/09
AnderInternational Conference on Heat Exchanger Fouling and Cleaning VIII - 2009, Schladming, Austria

Vingerafdruk Duik in de onderzoeksthema's van 'Influence of the apex angle of coned shaped tubes on particulate fouling of heat exchangers'. Samen vormen ze een unieke vingerafdruk.

  • Citeer dit

    Abd-Elhady, M. S., Rindt, C. C. M., & Steenhoven, van, A. A. (2009). Influence of the apex angle of coned shaped tubes on particulate fouling of heat exchangers. In H. Mueller-Steinhagen, & M. R. Malayeri (editors), Proceedings of the International Conference on Heat Exchanger Fouling and Cleaning VIII - 2009, 14-19 June, 2009, Schladming, Austria (blz. 200-208)