Improved modeling of an InP-based spot-size converter

J. Stulemeijer; H. Blok; A.F. Bakker; M.K. Smit

Improved modeling of an InP-based spot-size converter

J. Stulemeijer, H. Blok, A.F. Bakker, M.K. Smit

Photonic Integration

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

6 Downloads (Pure)

Samenvatting

Integrated Spot-Size Converters (SSCs) are crucial for reducing the coupling loss between InP-based Photonic Integrated Circuits and optical fibers. Previously we reported a novel 2D simulation tool for SSCs based on the continuos limit of the Coupled-Mode Theory. In this paper we present the 3D extension of this model. This model is illustrated with a SSC structure in which the vertically etched taper is replaced by a laterally tapered layer in the upper part of the converter, which is easier from a fabrication point of view.

Originele taal-2	Engels
Titel	Proceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands
Redacteuren	X.J.M. Leijtens, J.H. Besten, den
Plaats van productie	Delft
Uitgeverij	Technische Universiteit Delft
Pagina's	103-106
ISBN van geprinte versie	90-9014260-6
Status	Gepubliceerd - 2000
Evenement	5th Annual Symposium of the IEEE/LEOS Benelux Chapter - Delft, Nederland Duur: 30 okt. 2000 → 30 okt. 2000

Congres

Congres	5th Annual Symposium of the IEEE/LEOS Benelux Chapter
Land/Regio	Nederland
Stad	Delft
Periode	30/10/00 → 30/10/00

Citeer dit

@inproceedings{b1930bc04f25454dbf87ba77ed263394,

title = "Improved modeling of an InP-based spot-size converter",

abstract = "Integrated Spot-Size Converters (SSCs) are crucial for reducing the coupling loss between InP-based Photonic Integrated Circuits and optical fibers. Previously we reported a novel 2D simulation tool for SSCs based on the continuos limit of the Coupled-Mode Theory. In this paper we present the 3D extension of this model. This model is illustrated with a SSC structure in which the vertically etched taper is replaced by a laterally tapered layer in the upper part of the converter, which is easier from a fabrication point of view.",

author = "J. Stulemeijer and H. Blok and A.F. Bakker and M.K. Smit",

year = "2000",

language = "English",

isbn = "90-9014260-6",

pages = "103--106",

editor = "X.J.M. Leijtens and {Besten, den}, J.H.",

booktitle = "Proceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands",

publisher = "Technische Universiteit Delft",

address = "Netherlands",

note = "5th Annual Symposium of the IEEE/LEOS Benelux Chapter ; Conference date: 30-10-2000 Through 30-10-2000",

}

Stulemeijer, J, Blok, H, Bakker, AF & Smit, MK 2000, Improved modeling of an InP-based spot-size converter. in XJM Leijtens & JH Besten, den (redactie), Proceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands. Technische Universiteit Delft, Delft, blz. 103-106, 5th Annual Symposium of the IEEE/LEOS Benelux Chapter, Delft, Nederland, 30/10/00.

Improved modeling of an InP-based spot-size converter. / Stulemeijer, J.; Blok, H.; Bakker, A.F. et al.
Proceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands. redactie / X.J.M. Leijtens; J.H. Besten, den. Delft: Technische Universiteit Delft, 2000. blz. 103-106.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Improved modeling of an InP-based spot-size converter

AU - Stulemeijer, J.

AU - Blok, H.

AU - Bakker, A.F.

AU - Smit, M.K.

PY - 2000

Y1 - 2000

N2 - Integrated Spot-Size Converters (SSCs) are crucial for reducing the coupling loss between InP-based Photonic Integrated Circuits and optical fibers. Previously we reported a novel 2D simulation tool for SSCs based on the continuos limit of the Coupled-Mode Theory. In this paper we present the 3D extension of this model. This model is illustrated with a SSC structure in which the vertically etched taper is replaced by a laterally tapered layer in the upper part of the converter, which is easier from a fabrication point of view.

AB - Integrated Spot-Size Converters (SSCs) are crucial for reducing the coupling loss between InP-based Photonic Integrated Circuits and optical fibers. Previously we reported a novel 2D simulation tool for SSCs based on the continuos limit of the Coupled-Mode Theory. In this paper we present the 3D extension of this model. This model is illustrated with a SSC structure in which the vertically etched taper is replaced by a laterally tapered layer in the upper part of the converter, which is easier from a fabrication point of view.

M3 - Conference contribution

SN - 90-9014260-6

SP - 103

EP - 106

BT - Proceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands

A2 - Leijtens, X.J.M.

A2 - Besten, den, J.H.

PB - Technische Universiteit Delft

CY - Delft

T2 - 5th Annual Symposium of the IEEE/LEOS Benelux Chapter

Y2 - 30 October 2000 through 30 October 2000

ER -

Improved modeling of an InP-based spot-size converter

Samenvatting

Congres

Vingerafdruk

Citeer dit