Halide homogenization for low energy loss in 2-eV-bandgap perovskites and increased efficiency in all-perovskite triple-junction solar cells

Junke Wang, Lewei Zeng, Dong Zhang, Aidan Maxwell, Hao Chen, Kunal Datta, Alessandro Caiazzo, Willemijn H.M. Remmerswaal, Nick R.M. Schipper, Zehua Chen, Kevin Ho, Akash Dasgupta, Gunnar Kusch, Riccardo Ollearo, Laura Bellini, Shuaifeng Hu, Zaiwei Wang, Chongwen Li, Sam Teale, Luke GraterBin Chen, Martijn M. Wienk, Rachel A. Oliver, Henry J. Snaith, René A.J. Janssen (Corresponding author), Edward H. Sargent (Corresponding author)

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

66 Citaten (Scopus)
45 Downloads (Pure)
Originele taal-2Engels
Pagina's (van-tot)70-80
Aantal pagina's11
TijdschriftNature Energy
Volume9
Nummer van het tijdschrift1
DOI's
StatusGepubliceerd - jan. 2024

Financiering

We thank D. Ginger and F. Jiang of the University of Washington for facilitating the PiFM and discussions on PL mapping experiments. This work was partly supported by the Ontario Research Fund Research Excellence programme (ORF7: Ministry of Research and Innovation, Ontario Research Fund Research Excellence Round 7). This work was also supported by the King Abdullah University of Science and Technology under award number OSR-2020-CRG9-4350.2. The authors from the Eindhoven University of Technology acknowledge funding by The Netherlands Organization for Scientific Research (NWO) through the Joint Solar Programme III (project 680.91.011) and the Spinoza prize awarded to R.A.J.J. and by the Ministry of Education, Culture and Science (Gravity programme 024.001.035). We also acknowledge Solliance, a partnership of R&D organizations from The Netherlands, Belgium and Germany working in thin-film photovoltaic solar energy. J.W. and R.A.J.J. acknowledge funding from the EU’s Horizon Europe research and innovation under grant agreement number 101075605 (SuPerTandem). K.H. acknowledges the Department of Energy, Basic Energy Sciences DE-SC0013957 for supporting his PiFM microscopy work in support of the project. A.D. would like to thank the Penrose Scholarship for funding his studentship. R.A.O. and G.K. acknowledge financial support from the Engineering and Physical Sciences Research Council (EPSRC) (under EP/R025193/1). S.H. and H.J.S. acknowledge funding from the EU’s Horizon Europe research and innovation programme under grant agreement number 101075330 (NEXUS). H.J.S. also acknowledges funding from the EPSRC UK under EP/S004947/1. We thank the Canadian Light Source (CLS) for support through a travel grant. GIWAXS patterns were collected at the BXDS Beamline at the CLS with the assistance of A. Leontowich and C.-Y. Kim. The CLS is funded by NSERC, the Canadian Institutes of Health Research, Canada Foundation for Innovation, the Government of Saskatchewan, Western Economic Diversification Canada and the University of Saskatchewan. We thank T. Song for efficiency certification in NREL. We thank D. Ginger and F. Jiang of the University of Washington for facilitating the PiFM and discussions on PL mapping experiments. This work was partly supported by the Ontario Research Fund Research Excellence programme (ORF7: Ministry of Research and Innovation, Ontario Research Fund Research Excellence Round 7). This work was also supported by the King Abdullah University of Science and Technology under award number OSR-2020-CRG9-4350.2. The authors from the Eindhoven University of Technology acknowledge funding by The Netherlands Organization for Scientific Research (NWO) through the Joint Solar Programme III (project 680.91.011) and the Spinoza prize awarded to R.A.J.J. and by the Ministry of Education, Culture and Science (Gravity programme 024.001.035). We also acknowledge Solliance, a partnership of R&D organizations from The Netherlands, Belgium and Germany working in thin-film photovoltaic solar energy. J.W. and R.A.J.J. acknowledge funding from the EU’s Horizon Europe research and innovation under grant agreement number 101075605 (SuPerTandem). K.H. acknowledges the Department of Energy, Basic Energy Sciences DE-SC0013957 for supporting his PiFM microscopy work in support of the project. A.D. would like to thank the Penrose Scholarship for funding his studentship. R.A.O. and G.K. acknowledge financial support from the Engineering and Physical Sciences Research Council (EPSRC) (under EP/R025193/1). S.H. and H.J.S. acknowledge funding from the EU’s Horizon Europe research and innovation programme under grant agreement number 101075330 (NEXUS). H.J.S. also acknowledges funding from the EPSRC UK under EP/S004947/1. We thank the Canadian Light Source (CLS) for support through a travel grant. GIWAXS patterns were collected at the BXDS Beamline at the CLS with the assistance of A. Leontowich and C.-Y. Kim. The CLS is funded by NSERC, the Canadian Institutes of Health Research, Canada Foundation for Innovation, the Government of Saskatchewan, Western Economic Diversification Canada and the University of Saskatchewan. We thank T. Song for efficiency certification in NREL.

FinanciersFinanciernummer
European Union’s Horizon Europe research and innovation programme101075605
European Union’s Horizon Europe research and innovation programmeEP/S004947/1, 101075330
U.S. Department of Energy
University of Saskatchewan
Natural Sciences and Engineering Research Council of Canada
Engineering and Physical Sciences Research CouncilEP/R025193/1
Ministerie van OCW024.001.035
Nederlandse Organisatie voor Wetenschappelijk Onderzoek680.91.011
King Abdullah University of Science and TechnologyOSR-2020-CRG9-4350.2

    Vingerafdruk

    Duik in de onderzoeksthema's van 'Halide homogenization for low energy loss in 2-eV-bandgap perovskites and increased efficiency in all-perovskite triple-junction solar cells'. Samen vormen ze een unieke vingerafdruk.

    Citeer dit