Extended design method for in-plane stability of haunched sway portal frames

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

Uittreksel

In current design rules the effect of a haunch on the sway in-plane stability of a steel portal frame only takes into account the influence of the haunch dimensions on the beam-to-column connection strength and stiffness. The effect of the haunch dimensions on the beam behavior, and thus on the frame behavior, is not included. The paper describes the effect of this phenomenon by regarding current design methods and comparing these with analytical solutions. The validity of the methods is covered by numerical simulations. For a vertical beam loading, the larger the span of the portal frame, the higher the compressive force in the beam becomes. In addition, the longer the span of the frame, the smaller the critical buckling load of the beam becomes. This decreases the stability of the overall frame significantly. In fact, the compressive force in the beam of a portal frame has a significant effect on the additional stiffness the haunch provides to the column. Due to the adjusted center line of the haunch causing an eccentricity, an additional first order moment is generated. This additional internal moment reduces the additional stiffness the haunch provides. For some spans this may even cause the additional stiffness of the haunch to be negligible. The research has given more insight, also on the effect of the shift of the compressive force in the beam, which depends on the geometry of the haunch. The study resulted in two simple correction factors for the current design rules, where these correction factors cover amplification factors for the original stiffness of the beam. The factors depend on the kind of loading (point load or equally distributed load) and on the haunch to rafter ratio (with regard to the length of the haunch as well as with regard to the height of the haunch).
TaalEngels
Titel8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark
Pagina's1344-1352
DOI's
StatusGepubliceerd - 2017
Evenement8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark - Copenhagen, Denemarken
Duur: 13 sep 201715 sep 2017
http://www.eurosteel2017.dk/

Publicatie series

NaamCE/Papers
Nr.2-3
Volume1
ISSN van geprinte versie2509-7075

Congres

Congres8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark
Verkorte titelEUROSTEEL2017
LandDenemarken
StadCopenhagen
Periode13/09/1715/09/17
Internet adres

Vingerafdruk

Stiffness
Buckling
Amplification
Geometry
Steel
Computer simulation

Citeer dit

van Hove, B. W. E. M., Snijder, H. H., Hofmeyer, H., & Altinga, N. (2017). Extended design method for in-plane stability of haunched sway portal frames. In 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark (blz. 1344-1352). (CE/Papers; Vol. 1, Nr. 2-3). DOI: 10.1002/cepa.176
van Hove, B.W.E.M. ; Snijder, H.H. ; Hofmeyer, H. ; Altinga, N./ Extended design method for in-plane stability of haunched sway portal frames. 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. 2017. blz. 1344-1352 (CE/Papers; 2-3).
@inproceedings{2153544bbbeb4524b41820f1634d229b,
title = "Extended design method for in-plane stability of haunched sway portal frames",
abstract = "In current design rules the effect of a haunch on the sway in-plane stability of a steel portal frame only takes into account the influence of the haunch dimensions on the beam-to-column connection strength and stiffness. The effect of the haunch dimensions on the beam behavior, and thus on the frame behavior, is not included. The paper describes the effect of this phenomenon by regarding current design methods and comparing these with analytical solutions. The validity of the methods is covered by numerical simulations. For a vertical beam loading, the larger the span of the portal frame, the higher the compressive force in the beam becomes. In addition, the longer the span of the frame, the smaller the critical buckling load of the beam becomes. This decreases the stability of the overall frame significantly. In fact, the compressive force in the beam of a portal frame has a significant effect on the additional stiffness the haunch provides to the column. Due to the adjusted center line of the haunch causing an eccentricity, an additional first order moment is generated. This additional internal moment reduces the additional stiffness the haunch provides. For some spans this may even cause the additional stiffness of the haunch to be negligible. The research has given more insight, also on the effect of the shift of the compressive force in the beam, which depends on the geometry of the haunch. The study resulted in two simple correction factors for the current design rules, where these correction factors cover amplification factors for the original stiffness of the beam. The factors depend on the kind of loading (point load or equally distributed load) and on the haunch to rafter ratio (with regard to the length of the haunch as well as with regard to the height of the haunch).",
author = "{van Hove}, B.W.E.M. and H.H. Snijder and H. Hofmeyer and N. Altinga",
year = "2017",
doi = "10.1002/cepa.176",
language = "English",
series = "CE/Papers",
number = "2-3",
pages = "1344--1352",
booktitle = "8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark",

}

van Hove, BWEM, Snijder, HH, Hofmeyer, H & Altinga, N 2017, Extended design method for in-plane stability of haunched sway portal frames. in 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. CE/Papers, nr. 2-3, vol. 1, blz. 1344-1352, Copenhagen, Denemarken, 13/09/17. DOI: 10.1002/cepa.176

Extended design method for in-plane stability of haunched sway portal frames. / van Hove, B.W.E.M.; Snijder, H.H.; Hofmeyer, H.; Altinga, N.

8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. 2017. blz. 1344-1352 (CE/Papers; Vol. 1, Nr. 2-3).

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

TY - GEN

T1 - Extended design method for in-plane stability of haunched sway portal frames

AU - van Hove,B.W.E.M.

AU - Snijder,H.H.

AU - Hofmeyer,H.

AU - Altinga,N.

PY - 2017

Y1 - 2017

N2 - In current design rules the effect of a haunch on the sway in-plane stability of a steel portal frame only takes into account the influence of the haunch dimensions on the beam-to-column connection strength and stiffness. The effect of the haunch dimensions on the beam behavior, and thus on the frame behavior, is not included. The paper describes the effect of this phenomenon by regarding current design methods and comparing these with analytical solutions. The validity of the methods is covered by numerical simulations. For a vertical beam loading, the larger the span of the portal frame, the higher the compressive force in the beam becomes. In addition, the longer the span of the frame, the smaller the critical buckling load of the beam becomes. This decreases the stability of the overall frame significantly. In fact, the compressive force in the beam of a portal frame has a significant effect on the additional stiffness the haunch provides to the column. Due to the adjusted center line of the haunch causing an eccentricity, an additional first order moment is generated. This additional internal moment reduces the additional stiffness the haunch provides. For some spans this may even cause the additional stiffness of the haunch to be negligible. The research has given more insight, also on the effect of the shift of the compressive force in the beam, which depends on the geometry of the haunch. The study resulted in two simple correction factors for the current design rules, where these correction factors cover amplification factors for the original stiffness of the beam. The factors depend on the kind of loading (point load or equally distributed load) and on the haunch to rafter ratio (with regard to the length of the haunch as well as with regard to the height of the haunch).

AB - In current design rules the effect of a haunch on the sway in-plane stability of a steel portal frame only takes into account the influence of the haunch dimensions on the beam-to-column connection strength and stiffness. The effect of the haunch dimensions on the beam behavior, and thus on the frame behavior, is not included. The paper describes the effect of this phenomenon by regarding current design methods and comparing these with analytical solutions. The validity of the methods is covered by numerical simulations. For a vertical beam loading, the larger the span of the portal frame, the higher the compressive force in the beam becomes. In addition, the longer the span of the frame, the smaller the critical buckling load of the beam becomes. This decreases the stability of the overall frame significantly. In fact, the compressive force in the beam of a portal frame has a significant effect on the additional stiffness the haunch provides to the column. Due to the adjusted center line of the haunch causing an eccentricity, an additional first order moment is generated. This additional internal moment reduces the additional stiffness the haunch provides. For some spans this may even cause the additional stiffness of the haunch to be negligible. The research has given more insight, also on the effect of the shift of the compressive force in the beam, which depends on the geometry of the haunch. The study resulted in two simple correction factors for the current design rules, where these correction factors cover amplification factors for the original stiffness of the beam. The factors depend on the kind of loading (point load or equally distributed load) and on the haunch to rafter ratio (with regard to the length of the haunch as well as with regard to the height of the haunch).

U2 - 10.1002/cepa.176

DO - 10.1002/cepa.176

M3 - Conference contribution

T3 - CE/Papers

SP - 1344

EP - 1352

BT - 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark

ER -

van Hove BWEM, Snijder HH, Hofmeyer H, Altinga N. Extended design method for in-plane stability of haunched sway portal frames. In 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. 2017. blz. 1344-1352. (CE/Papers; 2-3). Beschikbaar vanaf, DOI: 10.1002/cepa.176