Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies

R. A. Buswell, F. P. Bos, Wilson Ricardo Leal da Silva, N. Hack, Harald Kloft, Dirk Lowke, Niklas Freund, Asko Fromm, E. Dini, Timothy Wangler, E. Lloret-Fritschi, Roel Schipper, Viktor Mechtcherine, Arnaud Perrot, K. Vasilic, Nicolas Roussel

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureHoofdstukAcademicpeer review

15 Citaten (Scopus)

Samenvatting

The need for methods for forming concrete has existed for as long as concrete has been used in constructing the built environment. Creating flat, rectilinear formers have traditionally been the cost and time efficient default for the majority of applications. The desire for greater design freedom and the drive to automate construction manufacturing is providing a platform for the continued development of a family of processes called Digital Fabrication with Concrete (DFC) technologies. DFC technologies are many and varied. Much of the material science theory is common, but the process steps vary significantly between methods, creating challenges as we look towards performance comparison and standardisation. Presented here is a framework to help identify and describe process differences and a showcase of DFC application case studies that explain the processes behind a sub-set of the technologies available.

Originele taal-2Engels
TitelDigital Fabrication with Cement-Based Materials
UitgeverijSpringer
Hoofdstuk2
Pagina's11-48
Aantal pagina's38
ISBN van elektronische versie978-3-030-90535-4
ISBN van geprinte versie978-3-030-90534-7
DOI's
StatusGepubliceerd - jan. 2022

Publicatie series

NaamRILEM State-of-the-Art Reports
Volume36
ISSN van geprinte versie2213-204X
ISSN van elektronische versie2213-2031

Bibliografische nota

Publisher Copyright:
© 2022, RILEM.

Financiering

Acknowledgements The work was supported by: the UK Industrial Strategy Challenge Fund: Transforming Construction initiative (EPSRC grant number EP/S031405/1) and EPSRC Grant number EP/P031420/1; the I-Site Future initiative, through the DiXite program at Gustave Eiffel University, Paris, France; the Swiss National Science Foundation, National Centre for Competence in Research: Digital Fabrication in Architecture; the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), Project Number 387152958 (GZ: ME 2938/20-1), within the priority program SPP 2005 OPUS FLUIDUM FUTURUM – Rheology of reactive, multiscale, multiphase construction materials; the Innovation Fund Denmark (Grant no. 8055-00030B: Next Generation of 3D-printed Concrete Structures); the Junior Professorship for Digital Building Fabrication is sponsored by the Gerhard and Karin Matthäi Foundation; the development of the Shotcrete 3D Printing technology (SC3DP) was funded by the Ministry for Science and Culture (MWK) of Lower Saxony and implemented with the DFG-funded Digital Building Fabrication Laboratory (DBFL). Mr. Wu from HuaShang Tenda provided information on the construction of the residential villa in Tongzhou, Beijing as well as Figs. 2.23-3 and 4 and 2.24. The work was supported by: the UK Industrial Strategy Challenge Fund: Transforming Construction initiative (EPSRC grant number EP/S031405/1) and EPSRC Grant number EP/P031420/1; the I-Site Future initiative, through the DiXite program at Gustave Eiffel University, Paris, France; the Swiss National Science Foundation, National Centre for Competence in Research: Digital Fabrication in Architecture; the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), Project Number 387152958 (GZ: ME 2938/20-1), within the priority program SPP 2005 OPUS FLUIDUM FUTURUM ? Rheology of reactive, multiscale, multiphase construction materials; the Innovation Fund Denmark (Grant no. 8055-00030B: Next Generation of 3D-printed Concrete Structures); the Junior Professorship for Digital Building Fabrication is sponsored by the Gerhard and Karin Matth?i Foundation; the development of the Shotcrete 3D Printing technology (SC3DP) was funded by the Ministry for Science and Culture (MWK) of Lower Saxony and implemented with the DFG-funded Digital Building Fabrication Laboratory (DBFL). Mr. Wu from HuaShang Tenda provided information on the construction of the residential villa in Tongzhou, Beijing as well as Figs. 2.23-3 and 4 and 2.24.

FinanciersFinanciernummer
Gustave Eiffel University
Engineering and Physical Sciences Research CouncilEP/S031405/1, EP/P031420/1
Deutsche ForschungsgemeinschaftME 2938/20-1, 387152958
Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung

    Vingerafdruk

    Duik in de onderzoeksthema's van 'Digital Fabrication with Cement-Based Materials: Process Classification and Case Studies'. Samen vormen ze een unieke vingerafdruk.

    Citeer dit