Determination of the phase diagram of the MoFe system using diffusion couples

C.P. Heijwegen, G.D. Rieck

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

31 Citaten (Scopus)

Samenvatting

The phase diagram of the MoFe system between 800 and 1300 °C has been determined using diffusion couples consisting of the pure metals or their alloys. The boundary concentrations were measured with an electron probe microanalyser. The μ-(Fe7Mo6) phase has a homogeneity range from 57 to 61.5 at.% Fe; above 1250 °C the Fe-rich boundary shifts towards the Mo-rich side. The R-phase is stable above 1200 °C. Its Fe-rich boundary lies at 65 at.% Fe and is vertical, but the Mo-rich one shifts from 65 at.% Fe at 1200 °C to 62 at.% Fe at 1300 °C. The σ-phase is stable above about 1235 °C and contains about 45 at.% Fe. α-Fe can dissolve 17.9 at.% Mo and Mo 8 at.% Fe at 1300 °C.

Originele taal-2Engels
Pagina's (van-tot)115-121
Aantal pagina's7
TijdschriftJournal of the Less-Common Metals
Volume37
Nummer van het tijdschrift1
DOI's
StatusGepubliceerd - jul. 1974

Financiering

The authors wish to thank Dr. G. F. Bastin for comments on the manuscript. The present research forms part of a programme financed by the Netherlands Organization for the Advancement of Pure Scientific Research (Z.W.O.).

Vingerafdruk

Duik in de onderzoeksthema's van 'Determination of the phase diagram of the MoFe system using diffusion couples'. Samen vormen ze een unieke vingerafdruk.

Citeer dit