### Samenvatting

This paper describes how the usage of digital post-correction techniques in pipelined analog-to-digital converters (ADC's) can be exploited optimally during the design-phase of the converter. It is known that post-correction algorithms reduce the influence of several cir-
cuit impairments on the final accuracy of the converter [1], [2]. However, until now, no models relating these circuit impairments to the final accuracy of the ADC, taking the usage of a post-correction algorithm into account, have been known to exist. To take maximum advantage of a certain correction algorithm, this model is a must. Therefore, this paper introduces a behavioral model of a pipelined ADC, including several important error mechanisms, representing possible circuit impairments like offset, gain error, harmonic distortion, etc. With this model, including the post-correction algorithm, simple design con-
straints for each part of the circuit can be derived such that a certain target accuracy of the ADC is achieved. In the analog design-phase these high-level constraints can be translated to implementation-dependent low-level design requirements. If these low-level requirements are fulfilled, the model guarantees that the converter will achieve its target accuracy. A design-example for a 12-bit pipelined ADC is worked out. Simulation results will be shown, validating the correctness of the presented design-method. The proposed design-strategy can be applied to all pipelined ADC's with post-correction like in [1], [2], taking maximum advantage of the benefits of the correction algorithm during the analog design-phase.

Originele taal-2 | Engels |
---|---|

Titel | Proceedings of the 15th ProRISC, Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) 25 - 26 November 2004, Veldhoven, the Netherlands |

Plaats van productie | Utrecht, the Netherlands |

Uitgeverij | STW Technology Foundation |

Pagina's | 502-511 |

ISBN van geprinte versie | 90-73461-43-X |

Status | Gepubliceerd - 2004 |

Evenement | 2004 Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) - Veldhoven, Nederland Duur: 25 nov 2004 → 26 nov 2004 |

### Congres

Congres | 2004 Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) |
---|---|

Verkorte titel | ProRISC 2004 |

Land | Nederland |

Stad | Veldhoven |

Periode | 25/11/04 → 26/11/04 |

Ander | ProRISC 2004, Veldhoven, the Netherlands |

## Vingerafdruk Duik in de onderzoeksthema's van 'Design Strategy for a Pipelined ADC Employing Digital Post-correction'. Samen vormen ze een unieke vingerafdruk.

## Citeer dit

Harpe, P. J. A., Zanikopoulos, A., Hegt, J. A., & Roermund, van, A. H. M. (2004). Design Strategy for a Pipelined ADC Employing Digital Post-correction. In

*Proceedings of the 15th ProRISC, Annual Workshop on Circuits, Systems and Signal Processing (ProRISC 2004) 25 - 26 November 2004, Veldhoven, the Netherlands*(blz. 502-511). STW Technology Foundation.