Design of a short polarization converter on InP/InGaAsP using asymmetrical waveguides

Y.C. Zhu, F.H. Groen, D.H.P. Maat, X.J.M. Leijtens, M.K. Smit

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

Samenvatting

Simulation results are presented for a short polarization converter using asymmetrical waveguides, containing one sloped sidewall and one vertical sidewall. The angles of both modes with respect to the coordinate axes have been calculated as a function of the waveguide width. Polarization converters with one section (length is 196 mm), one period (2 sections) or 2 periods can be realized by selecting the suitable width and length of this waveguide. Tolerance of width and length of the waveguide and thickness of film layer for the polarization converter have been analyzed and will be discussed.
Originele taal-2Engels
TitelProceedings of the 5th annual symposium of the IEEE/LEOS Benelux Chapter : October 30, 2000, Delft , the Netherlands
RedacteurenX.J.M. Leijtens, J.H. Besten, den
Plaats van productieDelft
UitgeverijDelft University of Technology
Pagina's227-230
ISBN van geprinte versie90-9014260-6
StatusGepubliceerd - 2000
Evenement5th Annual Symposium of the IEEE/LEOS Benelux Chapter - Delft, Nederland
Duur: 30 okt 200030 okt 2000

Congres

Congres5th Annual Symposium of the IEEE/LEOS Benelux Chapter
Land/RegioNederland
StadDelft
Periode30/10/0030/10/00

Vingerafdruk

Duik in de onderzoeksthema's van 'Design of a short polarization converter on InP/InGaAsP using asymmetrical waveguides'. Samen vormen ze een unieke vingerafdruk.

Citeer dit