Design and industrialisation of solidly-mounted BAW filters

J.W. Lobeek; A.B. Smolders

doi:10.1109/MWSYM.2006.249551

Design and industrialisation of solidly-mounted BAW filters

J.W. Lobeek, A.B. Smolders

Electromagnetics

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

8 Citaten (Scopus)

Samenvatting

This paper discusses the design of high-Q bulk-acoustic-wave filters that are optimised for integration in to front-end-modules (FEM) for 2G/3G cellular applications. In addition, the industrialisation aspects of BAW filters are presented. A novel low-cost process was developed based on standard IC processing which uses a solidly mounted reflector stack of dielectric materials. Experimental results are shown of filters operating at 1.9 GHz. The loss mechanisms that occur in BAW filters which are produced in high-volume are analysed

Originele taal-2	Engels
Titel	Proceedings of the IEEE MTT-S International Microwave Symposium Digest 2006. 11-16 June 2006, San Francisco, California
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	386-389
DOI's	https://doi.org/10.1109/MWSYM.2006.249551
Status	Gepubliceerd - 2006
Evenement	conference; IEEE MTT Symposium 2006, San Francisco USA; 2006-06-11; 2006-06-16 - Duur: 11 jun. 2006 → 16 jun. 2006

Congres

Congres	conference; IEEE MTT Symposium 2006, San Francisco USA; 2006-06-11; 2006-06-16
Periode	11/06/06 → 16/06/06
Ander	IEEE MTT Symposium 2006, San Francisco USA

Toegang tot document

10.1109/MWSYM.2006.249551

Citeer dit

@inproceedings{4c0fe0327c4646bb82d370214a134091,

title = "Design and industrialisation of solidly-mounted BAW filters",

abstract = "This paper discusses the design of high-Q bulk-acoustic-wave filters that are optimised for integration in to front-end-modules (FEM) for 2G/3G cellular applications. In addition, the industrialisation aspects of BAW filters are presented. A novel low-cost process was developed based on standard IC processing which uses a solidly mounted reflector stack of dielectric materials. Experimental results are shown of filters operating at 1.9 GHz. The loss mechanisms that occur in BAW filters which are produced in high-volume are analysed",

author = "J.W. Lobeek and A.B. Smolders",

year = "2006",

doi = "10.1109/MWSYM.2006.249551",

language = "English",

pages = "386--389",

booktitle = "Proceedings of the IEEE MTT-S International Microwave Symposium Digest 2006. 11-16 June 2006, San Francisco, California",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "conference; IEEE MTT Symposium 2006, San Francisco USA; 2006-06-11; 2006-06-16 ; Conference date: 11-06-2006 Through 16-06-2006",

}

Lobeek, JW & Smolders, AB 2006, Design and industrialisation of solidly-mounted BAW filters. in Proceedings of the IEEE MTT-S International Microwave Symposium Digest 2006. 11-16 June 2006, San Francisco, California. Institute of Electrical and Electronics Engineers, Piscataway, blz. 386-389, conference; IEEE MTT Symposium 2006, San Francisco USA; 2006-06-11; 2006-06-16, 11/06/06. https://doi.org/10.1109/MWSYM.2006.249551

Design and industrialisation of solidly-mounted BAW filters. / Lobeek, J.W.; Smolders, A.B.
Proceedings of the IEEE MTT-S International Microwave Symposium Digest 2006. 11-16 June 2006, San Francisco, California. Piscataway: Institute of Electrical and Electronics Engineers, 2006. blz. 386-389.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Design and industrialisation of solidly-mounted BAW filters

AU - Lobeek, J.W.

AU - Smolders, A.B.

PY - 2006

Y1 - 2006

N2 - This paper discusses the design of high-Q bulk-acoustic-wave filters that are optimised for integration in to front-end-modules (FEM) for 2G/3G cellular applications. In addition, the industrialisation aspects of BAW filters are presented. A novel low-cost process was developed based on standard IC processing which uses a solidly mounted reflector stack of dielectric materials. Experimental results are shown of filters operating at 1.9 GHz. The loss mechanisms that occur in BAW filters which are produced in high-volume are analysed

AB - This paper discusses the design of high-Q bulk-acoustic-wave filters that are optimised for integration in to front-end-modules (FEM) for 2G/3G cellular applications. In addition, the industrialisation aspects of BAW filters are presented. A novel low-cost process was developed based on standard IC processing which uses a solidly mounted reflector stack of dielectric materials. Experimental results are shown of filters operating at 1.9 GHz. The loss mechanisms that occur in BAW filters which are produced in high-volume are analysed

U2 - 10.1109/MWSYM.2006.249551

DO - 10.1109/MWSYM.2006.249551

M3 - Conference contribution

SP - 386

EP - 389

BT - Proceedings of the IEEE MTT-S International Microwave Symposium Digest 2006. 11-16 June 2006, San Francisco, California

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - conference; IEEE MTT Symposium 2006, San Francisco USA; 2006-06-11; 2006-06-16

Y2 - 11 June 2006 through 16 June 2006

ER -

Design and industrialisation of solidly-mounted BAW filters

Samenvatting

Congres

Toegang tot document

Vingerafdruk

Citeer dit