Decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

4 Citaties (Scopus)

Uittreksel

The success of cardiovascular tissue engineering (TE) strategies largely depends on the mechanical environment in which cells develop a neotissue through growth and remodeling processes. This mechanical environment is defined by the local scaffold architecture to which cells adhere, that is, the microenvironment, and by external mechanical cues to which cells respond, that is, hemodynamic loading. The hemodynamic environment of early developing blood vessels consists of both shear stress (due to blood flow) and circumferential stretch (due to blood pressure). Experimental platforms that recapitulate this mechanical environment in a controlled and tunable manner are thus critical for investigating cardiovascular TE. In traditional perfusion bioreactors, however, shear stress and stretch are coupled, hampering a clear delineation of their effects on cell and tissue response. In this study, we uniquely designed a bioreactor that independently combines these two types of mechanical cues in eight parallel vascular grafts. The system is computationally and experimentally validated, through finite element analysis and culture of tissue constructs, respectively, to distinguish various levels of shear stress (up to 5 Pa) and cyclic stretch (up to 1.10). To illustrate the usefulness of the system, we investigated the relative contribution of cyclic stretch (1.05 at 0.5 Hz) and shear stress (1 Pa) to tissue development. Both types of hemodynamic loading contributed to cell alignment, but the contribution of shear stress overruled stretch-induced cell proliferation and matrix (i.e., collagen and glycosaminoglycan) production. At a macroscopic level, cyclic stretching led to the most linear stress-stretch response, which was not related to the presence of shear stress. In conclusion, we have developed a bioreactor that is particularly suited to further unravel the interplay between hemodynamics and in situ TE processes. Using the new system, this work highlights the importance of hemodynamic loading to the study of developing vascular tissues.

TaalEngels
Pagina's418-429
Aantal pagina's12
TijdschriftTissue Engineering Part C: Methods
Volume24
Nummer van het tijdschrift7
DOI's
StatusGepubliceerd - 1 jul 2018

Vingerafdruk

Grafts
Hemodynamics
Blood Vessels
Shear stress
Tissue
Transplants
Bioreactors
Tissue Engineering
Growth
Tissue engineering
Cues
Finite Element Analysis
Glycosaminoglycans
Blood pressure
Blood vessels
Cell proliferation
Collagen
Scaffolds
Perfusion
Stretching

Trefwoorden

    Citeer dit

    @article{faa01ed40e6748cc929bab68f0197ad7,
    title = "Decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft",
    abstract = "The success of cardiovascular tissue engineering (TE) strategies largely depends on the mechanical environment in which cells develop a neotissue through growth and remodeling processes. This mechanical environment is defined by the local scaffold architecture to which cells adhere, that is, the microenvironment, and by external mechanical cues to which cells respond, that is, hemodynamic loading. The hemodynamic environment of early developing blood vessels consists of both shear stress (due to blood flow) and circumferential stretch (due to blood pressure). Experimental platforms that recapitulate this mechanical environment in a controlled and tunable manner are thus critical for investigating cardiovascular TE. In traditional perfusion bioreactors, however, shear stress and stretch are coupled, hampering a clear delineation of their effects on cell and tissue response. In this study, we uniquely designed a bioreactor that independently combines these two types of mechanical cues in eight parallel vascular grafts. The system is computationally and experimentally validated, through finite element analysis and culture of tissue constructs, respectively, to distinguish various levels of shear stress (up to 5 Pa) and cyclic stretch (up to 1.10). To illustrate the usefulness of the system, we investigated the relative contribution of cyclic stretch (1.05 at 0.5 Hz) and shear stress (1 Pa) to tissue development. Both types of hemodynamic loading contributed to cell alignment, but the contribution of shear stress overruled stretch-induced cell proliferation and matrix (i.e., collagen and glycosaminoglycan) production. At a macroscopic level, cyclic stretching led to the most linear stress-stretch response, which was not related to the presence of shear stress. In conclusion, we have developed a bioreactor that is particularly suited to further unravel the interplay between hemodynamics and in situ TE processes. Using the new system, this work highlights the importance of hemodynamic loading to the study of developing vascular tissues.",
    keywords = "bioreactor, cyclic stretch, hemodynamics, shear stress, tissue engineering",
    author = "{van Haaften}, {Eline E.} and Wissing, {Tamar B.} and Rutten, {Marcel C.M.} and Bulsink, {Jurgen A.} and Kujtim Gashi and {van Kelle}, {Mathieu A.J.} and Smits, {Anthal I.P.M.} and Bouten, {Carlijn V.C.} and Kurniawan, {Nicholas A.}",
    year = "2018",
    month = "7",
    day = "1",
    doi = "10.1089/ten.TEC.2018.0104",
    language = "English",
    volume = "24",
    pages = "418--429",
    journal = "Tissue Engineering Part C: Methods",
    issn = "1937-3384",
    publisher = "Mary Ann Liebert Inc.",
    number = "7",

    }

    Decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft. / van Haaften, Eline E.; Wissing, Tamar B.; Rutten, Marcel C.M.; Bulsink, Jurgen A.; Gashi, Kujtim; van Kelle, Mathieu A.J.; Smits, Anthal I.P.M.; Bouten, Carlijn V.C.; Kurniawan, Nicholas A.

    In: Tissue Engineering Part C: Methods, Vol. 24, Nr. 7, 01.07.2018, blz. 418-429.

    Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

    TY - JOUR

    T1 - Decoupling the effect of shear stress and stretch on tissue growth and remodeling in a vascular graft

    AU - van Haaften,Eline E.

    AU - Wissing,Tamar B.

    AU - Rutten,Marcel C.M.

    AU - Bulsink,Jurgen A.

    AU - Gashi,Kujtim

    AU - van Kelle,Mathieu A.J.

    AU - Smits,Anthal I.P.M.

    AU - Bouten,Carlijn V.C.

    AU - Kurniawan,Nicholas A.

    PY - 2018/7/1

    Y1 - 2018/7/1

    N2 - The success of cardiovascular tissue engineering (TE) strategies largely depends on the mechanical environment in which cells develop a neotissue through growth and remodeling processes. This mechanical environment is defined by the local scaffold architecture to which cells adhere, that is, the microenvironment, and by external mechanical cues to which cells respond, that is, hemodynamic loading. The hemodynamic environment of early developing blood vessels consists of both shear stress (due to blood flow) and circumferential stretch (due to blood pressure). Experimental platforms that recapitulate this mechanical environment in a controlled and tunable manner are thus critical for investigating cardiovascular TE. In traditional perfusion bioreactors, however, shear stress and stretch are coupled, hampering a clear delineation of their effects on cell and tissue response. In this study, we uniquely designed a bioreactor that independently combines these two types of mechanical cues in eight parallel vascular grafts. The system is computationally and experimentally validated, through finite element analysis and culture of tissue constructs, respectively, to distinguish various levels of shear stress (up to 5 Pa) and cyclic stretch (up to 1.10). To illustrate the usefulness of the system, we investigated the relative contribution of cyclic stretch (1.05 at 0.5 Hz) and shear stress (1 Pa) to tissue development. Both types of hemodynamic loading contributed to cell alignment, but the contribution of shear stress overruled stretch-induced cell proliferation and matrix (i.e., collagen and glycosaminoglycan) production. At a macroscopic level, cyclic stretching led to the most linear stress-stretch response, which was not related to the presence of shear stress. In conclusion, we have developed a bioreactor that is particularly suited to further unravel the interplay between hemodynamics and in situ TE processes. Using the new system, this work highlights the importance of hemodynamic loading to the study of developing vascular tissues.

    AB - The success of cardiovascular tissue engineering (TE) strategies largely depends on the mechanical environment in which cells develop a neotissue through growth and remodeling processes. This mechanical environment is defined by the local scaffold architecture to which cells adhere, that is, the microenvironment, and by external mechanical cues to which cells respond, that is, hemodynamic loading. The hemodynamic environment of early developing blood vessels consists of both shear stress (due to blood flow) and circumferential stretch (due to blood pressure). Experimental platforms that recapitulate this mechanical environment in a controlled and tunable manner are thus critical for investigating cardiovascular TE. In traditional perfusion bioreactors, however, shear stress and stretch are coupled, hampering a clear delineation of their effects on cell and tissue response. In this study, we uniquely designed a bioreactor that independently combines these two types of mechanical cues in eight parallel vascular grafts. The system is computationally and experimentally validated, through finite element analysis and culture of tissue constructs, respectively, to distinguish various levels of shear stress (up to 5 Pa) and cyclic stretch (up to 1.10). To illustrate the usefulness of the system, we investigated the relative contribution of cyclic stretch (1.05 at 0.5 Hz) and shear stress (1 Pa) to tissue development. Both types of hemodynamic loading contributed to cell alignment, but the contribution of shear stress overruled stretch-induced cell proliferation and matrix (i.e., collagen and glycosaminoglycan) production. At a macroscopic level, cyclic stretching led to the most linear stress-stretch response, which was not related to the presence of shear stress. In conclusion, we have developed a bioreactor that is particularly suited to further unravel the interplay between hemodynamics and in situ TE processes. Using the new system, this work highlights the importance of hemodynamic loading to the study of developing vascular tissues.

    KW - bioreactor

    KW - cyclic stretch

    KW - hemodynamics

    KW - shear stress

    KW - tissue engineering

    UR - http://www.scopus.com/inward/record.url?scp=85050013488&partnerID=8YFLogxK

    U2 - 10.1089/ten.TEC.2018.0104

    DO - 10.1089/ten.TEC.2018.0104

    M3 - Article

    VL - 24

    SP - 418

    EP - 429

    JO - Tissue Engineering Part C: Methods

    T2 - Tissue Engineering Part C: Methods

    JF - Tissue Engineering Part C: Methods

    SN - 1937-3384

    IS - 7

    ER -