Cost modeling for 2.5D and 3D stacked ICs

Mottaqiallah Taouil, Said Hamdioui, Erik Jan Marinissen

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureHoofdstukAcademicpeer review

Uittreksel

This chapter discusses cost modeling for 2.5D/3D‐stacked integrated circuits (2.5D/3D‐SICs) and presents a tool that considers all costs involved in the whole production chain, including design, manufacturing, test, packaging, and logistics. The tool provides the estimated overall cost for 2.5D/3D‐SICs and its cost breakdown for a given input parameter set consisting of test flows, die yield, stack yield, etc. The chapter defines test flows and highlights the importance of testing. In order to determine the most cost‐effective test flow, test requirements should be specified. However, taking only the test cost into consideration is not sufficient to provide a fair evaluation and/or comparison; a test flow does not only impact test cost but also design and manufacturing cost. The chapter defines and classifies the different costs involved in designing and manufacturing 2.5D/3D‐SICs. It also presents the 3D‐COSTAR cost model. It shows the crucial importance of 3D‐COSTAR by analyzing trade‐offs for several test optimization problems.
TaalEngels
TitelHandbook of 3D integration
Subtitelvolume 4: design, test, and thermal management
RedacteurenP.D. Franzon, E.J. Marinissen, M.S. Bakir
Plaats van productieWeinheim
UitgeverijWiley-VCH Verlag
Hoofdstuk9
Pagina's189-208
Aantal pagina's20
ISBN van geprinte versie978-3-527-33855-9
DOI's
StatusGepubliceerd - 8 feb 2019

Vingerafdruk

Cost modeling
Costs
Integrated circuits
Manufacturing
Manufacturing cost
Breakdown
Cost model
Testing
Logistics
Evaluation
Trade-offs
Optimization problem
Packaging

Citeer dit

Taouil, M., Hamdioui, S., & Marinissen, E. J. (2019). Cost modeling for 2.5D and 3D stacked ICs. In P. D. Franzon, E. J. Marinissen, & M. S. Bakir (editors), Handbook of 3D integration: volume 4: design, test, and thermal management (blz. 189-208). Weinheim: Wiley-VCH Verlag. DOI: 10.1002/9783527697052.ch9
Taouil, Mottaqiallah ; Hamdioui, Said ; Marinissen, Erik Jan. / Cost modeling for 2.5D and 3D stacked ICs. Handbook of 3D integration: volume 4: design, test, and thermal management. redacteur / P.D. Franzon ; E.J. Marinissen ; M.S. Bakir. Weinheim : Wiley-VCH Verlag, 2019. blz. 189-208
@inbook{2b84d005eeb74f84873bc0378f80148b,
title = "Cost modeling for 2.5D and 3D stacked ICs",
abstract = "This chapter discusses cost modeling for 2.5D/3D‐stacked integrated circuits (2.5D/3D‐SICs) and presents a tool that considers all costs involved in the whole production chain, including design, manufacturing, test, packaging, and logistics. The tool provides the estimated overall cost for 2.5D/3D‐SICs and its cost breakdown for a given input parameter set consisting of test flows, die yield, stack yield, etc. The chapter defines test flows and highlights the importance of testing. In order to determine the most cost‐effective test flow, test requirements should be specified. However, taking only the test cost into consideration is not sufficient to provide a fair evaluation and/or comparison; a test flow does not only impact test cost but also design and manufacturing cost. The chapter defines and classifies the different costs involved in designing and manufacturing 2.5D/3D‐SICs. It also presents the 3D‐COSTAR cost model. It shows the crucial importance of 3D‐COSTAR by analyzing trade‐offs for several test optimization problems.",
author = "Mottaqiallah Taouil and Said Hamdioui and Marinissen, {Erik Jan}",
year = "2019",
month = "2",
day = "8",
doi = "10.1002/9783527697052.ch9",
language = "English",
isbn = "978-3-527-33855-9",
pages = "189--208",
editor = "P.D. Franzon and E.J. Marinissen and M.S. Bakir",
booktitle = "Handbook of 3D integration",
publisher = "Wiley-VCH Verlag",
address = "Germany",

}

Taouil, M, Hamdioui, S & Marinissen, EJ 2019, Cost modeling for 2.5D and 3D stacked ICs. in PD Franzon, EJ Marinissen & MS Bakir (redactie), Handbook of 3D integration: volume 4: design, test, and thermal management. Wiley-VCH Verlag, Weinheim, blz. 189-208. DOI: 10.1002/9783527697052.ch9

Cost modeling for 2.5D and 3D stacked ICs. / Taouil, Mottaqiallah; Hamdioui, Said; Marinissen, Erik Jan.

Handbook of 3D integration: volume 4: design, test, and thermal management. redactie / P.D. Franzon; E.J. Marinissen; M.S. Bakir. Weinheim : Wiley-VCH Verlag, 2019. blz. 189-208.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureHoofdstukAcademicpeer review

TY - CHAP

T1 - Cost modeling for 2.5D and 3D stacked ICs

AU - Taouil,Mottaqiallah

AU - Hamdioui,Said

AU - Marinissen,Erik Jan

PY - 2019/2/8

Y1 - 2019/2/8

N2 - This chapter discusses cost modeling for 2.5D/3D‐stacked integrated circuits (2.5D/3D‐SICs) and presents a tool that considers all costs involved in the whole production chain, including design, manufacturing, test, packaging, and logistics. The tool provides the estimated overall cost for 2.5D/3D‐SICs and its cost breakdown for a given input parameter set consisting of test flows, die yield, stack yield, etc. The chapter defines test flows and highlights the importance of testing. In order to determine the most cost‐effective test flow, test requirements should be specified. However, taking only the test cost into consideration is not sufficient to provide a fair evaluation and/or comparison; a test flow does not only impact test cost but also design and manufacturing cost. The chapter defines and classifies the different costs involved in designing and manufacturing 2.5D/3D‐SICs. It also presents the 3D‐COSTAR cost model. It shows the crucial importance of 3D‐COSTAR by analyzing trade‐offs for several test optimization problems.

AB - This chapter discusses cost modeling for 2.5D/3D‐stacked integrated circuits (2.5D/3D‐SICs) and presents a tool that considers all costs involved in the whole production chain, including design, manufacturing, test, packaging, and logistics. The tool provides the estimated overall cost for 2.5D/3D‐SICs and its cost breakdown for a given input parameter set consisting of test flows, die yield, stack yield, etc. The chapter defines test flows and highlights the importance of testing. In order to determine the most cost‐effective test flow, test requirements should be specified. However, taking only the test cost into consideration is not sufficient to provide a fair evaluation and/or comparison; a test flow does not only impact test cost but also design and manufacturing cost. The chapter defines and classifies the different costs involved in designing and manufacturing 2.5D/3D‐SICs. It also presents the 3D‐COSTAR cost model. It shows the crucial importance of 3D‐COSTAR by analyzing trade‐offs for several test optimization problems.

U2 - 10.1002/9783527697052.ch9

DO - 10.1002/9783527697052.ch9

M3 - Chapter

SN - 978-3-527-33855-9

SP - 189

EP - 208

BT - Handbook of 3D integration

PB - Wiley-VCH Verlag

CY - Weinheim

ER -

Taouil M, Hamdioui S, Marinissen EJ. Cost modeling for 2.5D and 3D stacked ICs. In Franzon PD, Marinissen EJ, Bakir MS, redacteurs, Handbook of 3D integration: volume 4: design, test, and thermal management. Weinheim: Wiley-VCH Verlag. 2019. blz. 189-208. Beschikbaar vanaf, DOI: 10.1002/9783527697052.ch9