Corrections to: Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739)

Ronis T. Maximidis; DIego Caratelli; Giovanni Toso; A. Bart Smolders

doi:10.1109/TAP.2021.3064291

Corrections to: Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739)

Ronis T. Maximidis (Corresponding author), DIego Caratelli, Giovanni Toso, A. Bart Smolders

Onderzoeksoutput: Bijdrage aan tijdschrift › Commentaar/Brief aan de redacteur › Academic › peer review

25 Downloads (Pure)

Samenvatting

In the above article [1], the port and load numbering used in Fig. 1 does not correspond properly to the definitions used in the text. The updated version of Fig. 1 is given in this correction. (Figure presented). Fig. 1 of the original article [1] uses a numbering for the ports and loads which does not correspond properly to the numbering used throughout the article. Fig. 1(a) of this correction presents the original figure used in [1], while Fig. 1(b) presents the corrected version.

Originele taal-2	Engels
Artikelnummer	9376645
Pagina's (van-tot)	3629
Aantal pagina's	1
Tijdschrift	IEEE Transactions on Antennas and Propagation
Volume	69
Nummer van het tijdschrift	6
DOI's	https://doi.org/10.1109/TAP.2021.3064291
Status	Gepubliceerd - jun. 2021

Bibliografische nota

Publisher Copyright:
© 1963-2012 IEEE.

Toegang tot document

10.1109/TAP.2021.3064291

09376645Definitieve gepubliceerde versie, 163 KBLicentie: TAVERNE

Andere bestanden en links

Link naar publicatie in Scopus

1 Tijdschriftartikel

Design of Overlapped Subarrays Based on Aperture Reactive Loading
Maximidis, R. T. (Corresponding author), Caratelli, D., Toso, G. & Smolders, A. B., jul. 2020, In: IEEE Transactions on Antennas and Propagation. 68, 7, blz. 5322-5333 12 blz., 9046233.
Onderzoeksoutput: Bijdrage aan tijdschrift › Tijdschriftartikel › Academic › peer review
14 Citaten (Scopus)

Citeer dit

@article{5de88202151d4b6ea0bebc5d9a716199,

title = "Corrections to: Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739)",

abstract = "In the above article [1], the port and load numbering used in Fig. 1 does not correspond properly to the definitions used in the text. The updated version of Fig. 1 is given in this correction. (Figure presented). Fig. 1 of the original article [1] uses a numbering for the ports and loads which does not correspond properly to the numbering used throughout the article. Fig. 1(a) of this correction presents the original figure used in [1], while Fig. 1(b) presents the corrected version.",

author = "Maximidis, {Ronis T.} and DIego Caratelli and Giovanni Toso and Smolders, {A. Bart}",

note = "Publisher Copyright: {\textcopyright} 1963-2012 IEEE.",

year = "2021",

month = jun,

doi = "10.1109/TAP.2021.3064291",

language = "English",

volume = "69",

pages = "3629",

journal = "IEEE Transactions on Antennas and Propagation",

issn = "0018-926X",

publisher = "Institute of Electrical and Electronics Engineers",

number = "6",

}

Corrections to: Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739). / Maximidis, Ronis T. (Corresponding author); Caratelli, DIego; Toso, Giovanni et al.
In: IEEE Transactions on Antennas and Propagation, Vol. 69, Nr. 6, 9376645, 06.2021, blz. 3629.

Onderzoeksoutput: Bijdrage aan tijdschrift › Commentaar/Brief aan de redacteur › Academic › peer review

TY - JOUR

T1 - Corrections to

T2 - Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739)

AU - Maximidis, Ronis T.

AU - Caratelli, DIego

AU - Toso, Giovanni

AU - Smolders, A. Bart

PY - 2021/6

Y1 - 2021/6

N2 - In the above article [1], the port and load numbering used in Fig. 1 does not correspond properly to the definitions used in the text. The updated version of Fig. 1 is given in this correction. (Figure presented). Fig. 1 of the original article [1] uses a numbering for the ports and loads which does not correspond properly to the numbering used throughout the article. Fig. 1(a) of this correction presents the original figure used in [1], while Fig. 1(b) presents the corrected version.

AB - In the above article [1], the port and load numbering used in Fig. 1 does not correspond properly to the definitions used in the text. The updated version of Fig. 1 is given in this correction. (Figure presented). Fig. 1 of the original article [1] uses a numbering for the ports and loads which does not correspond properly to the numbering used throughout the article. Fig. 1(a) of this correction presents the original figure used in [1], while Fig. 1(b) presents the corrected version.

UR - http://www.scopus.com/inward/record.url?scp=85102695161&partnerID=8YFLogxK

U2 - 10.1109/TAP.2021.3064291

DO - 10.1109/TAP.2021.3064291

M3 - Comment/Letter to the editor

AN - SCOPUS:85102695161

SN - 0018-926X

VL - 69

SP - 3629

JO - IEEE Transactions on Antennas and Propagation

JF - IEEE Transactions on Antennas and Propagation

IS - 6

M1 - 9376645

ER -

Corrections to: Design of Overlapped Sub-Arrays Based on Aperture Reactive Loading (IEEE Trans. Antennas Propag. (2020) 68:7 (5322–5333) DOI: 10.1109/TAP.2020.2981739)

Samenvatting

Bibliografische nota

Toegang tot document

Andere bestanden en links

Vingerafdruk

Onderzoekersoutput

Design of Overlapped Subarrays Based on Aperture Reactive Loading

Citeer dit