Cooperative vehicle automation: safety aspects and control software architecture

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

1 Downloads (Pure)


Automated vehicles are designed to take over all or part of the driver's task, in order to safely and comfortably navigate through road traffic. Automated vehicles, however, are limited by the line-ofsight characteristics of the on-board sensors, e.g., radar, lidar, and camera. To overcome this limitation, wireless inter-vehicle communication can be employed, which not only provides information of vehicles beyond the line-of-sight, but also provides information that cannot be retrieved otherwise. This allows for implementation of collaborative behavior, which can significantly increase traffic throughput and decrease fuel consumption. The resulting vehicles are often referred to as "cooperative automated vehicles", whereas non-communicating automated vehicles are usually (but not necessarily correctly) termed "autonomous vehicles". To classify the various types of vehicle automation, the Society of Automotive Engineers has defined six automation levels, according to increasing functionality of the automation system and, correspondingly, a decreasing role of the diver [1]. In this classification scheme, level 1 automation, characterized by automation of either the longitudinal or the lateral vehicle motion, still requires the driver to be alert and to be able to take over the driving task at any time, thus implying only moderate requirements regarding reliability of the automation hard- and software. By means of an example of cooperative automation, in particular short-distance vehicle following by means of cooperative adaptive cruise control (CACC)[2], it is however shown that even for level 1 systems, stringent reliability requirements may apply, since the driver is unable to serve as a fallback option in case of system failures. CACC, which is also the basis for truck platooning, is only concerned with automation of the longitudinal vehicle motion. As a next step, cooperative automation can be extended to also involve lateral motion, thus yielding cooperative automated maneuvering, involving, e.g., automated gap making and subsequent merging into a platoon. A layered architecture for this type of automation applications, consisting of an operational, a tactical, and a strategic layer, is presented. This architecture builds upon the decomposition of traffic scenarios into maneuver primitives, which are initiated by a so-called interaction protocol. The practical application of this approach is illustrated by a brief overview of the Grand Cooperative Driving Challenge (GCDC), which was held in 2016 in The Netherlands [3]. As such, a first step is made towards a common automation framework, which is considered essential to establish true cooperation among different types and brands of vehicles.
Originele taal-2Engels
Titel2017 IEEE International Conference on Software Architecture Workshops (ICSAW)
UitgeverijInstitute of Electrical and Electronics Engineers
Aantal pagina's1
ISBN van elektronische versie 978-1-5090-4793-2
StatusGepubliceerd - 2017
Evenement2017 IEEE International Conference on Software Architecture (ICSA2017) - Gothenburg, Zweden
Duur: 3 apr. 20177 apr. 2017


Congres2017 IEEE International Conference on Software Architecture (ICSA2017)
Verkorte titelICSA 2017
Internet adres


Duik in de onderzoeksthema's van 'Cooperative vehicle automation: safety aspects and control software architecture'. Samen vormen ze een unieke vingerafdruk.

Citeer dit