Analytical passive mixer power gain models

M. Lont; D. Milosevic; P.G.M. Baltus; A.H.M. Roermund, van; G. Dolmans

doi:10.1109/ISCAS.2010.5537183

Analytical passive mixer power gain models

M. Lont
, D. Milosevic
, P.G.M. Baltus
, A.H.M. Roermund, van
, G. Dolmans

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

2 Citaten (Scopus)

325 Downloads (Pure)

Samenvatting

According to the well-known Friis equation the available power gain should be maximized to reduce the overall noise figure. Therefore, in receivers where an LNA is not present or its gain is low, the available power gain of the passive mixer is of interest. However, only the voltage gain is presented in many papers. In this paper an analytical model is presented for the power gain, voltage gain and input and output impedance of a passive mixer. The model is obtained using time-domain analysis since the mixer is periodically time variant. The validity of the models is checked using CMOS 90 nm transistor simulations.

Originele taal-2	Engels
Titel	Proceeding of 2010 IEEE International Symposium on Circuits and Systems (ISCAS) May 30-June 2 2010, Paris, France 0
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	2386-2389
ISBN van geprinte versie	978-1-4244-5308-5
DOI's	https://doi.org/10.1109/ISCAS.2010.5537183
Status	Gepubliceerd - 2010

Toegang tot document

10.1109/ISCAS.2010.5537183

Metis242417Definitieve gepubliceerde versie, 156 KB

Citeer dit

@inproceedings{3dd3b8475f4e4e379e9b73f8fe6485eb,

title = "Analytical passive mixer power gain models",

abstract = "According to the well-known Friis equation the available power gain should be maximized to reduce the overall noise figure. Therefore, in receivers where an LNA is not present or its gain is low, the available power gain of the passive mixer is of interest. However, only the voltage gain is presented in many papers. In this paper an analytical model is presented for the power gain, voltage gain and input and output impedance of a passive mixer. The model is obtained using time-domain analysis since the mixer is periodically time variant. The validity of the models is checked using CMOS 90 nm transistor simulations.",

author = "M. Lont and D. Milosevic and P.G.M. Baltus and \{Roermund, van\}, A.H.M. and G. Dolmans",

year = "2010",

doi = "10.1109/ISCAS.2010.5537183",

language = "English",

isbn = "978-1-4244-5308-5",

pages = "2386--2389",

booktitle = "Proceeding of 2010 IEEE International Symposium on Circuits and Systems (ISCAS) May 30-June 2 2010, Paris, France 0",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

Analytical passive mixer power gain models. / Lont, M.; Milosevic, D.; Baltus, P.G.M. et al.
Proceeding of 2010 IEEE International Symposium on Circuits and Systems (ISCAS) May 30-June 2 2010, Paris, France 0. Piscataway: Institute of Electrical and Electronics Engineers, 2010. blz. 2386-2389.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - Analytical passive mixer power gain models

AU - Lont, M.

AU - Milosevic, D.

AU - Baltus, P.G.M.

AU - Roermund, van, A.H.M.

AU - Dolmans, G.

PY - 2010

Y1 - 2010

N2 - According to the well-known Friis equation the available power gain should be maximized to reduce the overall noise figure. Therefore, in receivers where an LNA is not present or its gain is low, the available power gain of the passive mixer is of interest. However, only the voltage gain is presented in many papers. In this paper an analytical model is presented for the power gain, voltage gain and input and output impedance of a passive mixer. The model is obtained using time-domain analysis since the mixer is periodically time variant. The validity of the models is checked using CMOS 90 nm transistor simulations.

AB - According to the well-known Friis equation the available power gain should be maximized to reduce the overall noise figure. Therefore, in receivers where an LNA is not present or its gain is low, the available power gain of the passive mixer is of interest. However, only the voltage gain is presented in many papers. In this paper an analytical model is presented for the power gain, voltage gain and input and output impedance of a passive mixer. The model is obtained using time-domain analysis since the mixer is periodically time variant. The validity of the models is checked using CMOS 90 nm transistor simulations.

U2 - 10.1109/ISCAS.2010.5537183

DO - 10.1109/ISCAS.2010.5537183

M3 - Conference contribution

SN - 978-1-4244-5308-5

SP - 2386

EP - 2389

BT - Proceeding of 2010 IEEE International Symposium on Circuits and Systems (ISCAS) May 30-June 2 2010, Paris, France 0

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Analytical passive mixer power gain models

Samenvatting

Toegang tot document

Vingerafdruk

Citeer dit