Additive manufacturing on building construction

A.S. Guimarães; J.M.P.Q. Delgado; S.S. Lucas

doi:10.4028/www.scientific.net/DDF.412.207

Additive manufacturing on building construction

A.S. Guimarães
, J.M.P.Q. Delgado (Corresponding author)
, S.S. Lucas

Concrete Structures

Onderzoeksoutput: Bijdrage aan tijdschrift › Tijdschriftartikel › Academic › peer review

2 Citaten (Scopus)

Samenvatting

The future of construction will be directly connected with additive manufacturing (AM). It is easy to see the lack of consistency between jobs, labour inefficiency, schedule delays, delays on material delivery, exceeding budget projections and high percentage of material waste. Over the years, additive manufacturing has been a constant topic of discussion, in order to understand the limitations, applications and the overall impact on the cost of construction. In this work it is intended to present/discuss opportunities and challenges and the potential of AM to revolutionize the industry.

Originele taal-2	Engels
Pagina's (van-tot)	207-216
Aantal pagina's	10
Tijdschrift	Defect and Diffusion Forum
Volume	412
DOI's	https://doi.org/10.4028/www.scientific.net/DDF.412.207
Status	Gepubliceerd - nov. 2021

Bibliografische nota

Publisher Copyright:
© 2021 Trans Tech Publications Ltd, Switzerland.

Financiering

This work is financed by National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology) within the project MIT-EXPL/TDI/0041/2019. In addition, this work was financially supported by: Base Funding - UIDB/04708/2020 of the CONSTRUCT - Instituto de I&D em Estruturas e Construções - funded by national funds through the FCT/MCTES (PIDDAC).

Toegang tot document

10.4028/www.scientific.net/DDF.412.207

Andere bestanden en links

Link naar publicatie in Scopus

Citeer dit

@article{746acd1ead594bb58197b29a22c5401f,

title = "Additive manufacturing on building construction",

abstract = "The future of construction will be directly connected with additive manufacturing (AM). It is easy to see the lack of consistency between jobs, labour inefficiency, schedule delays, delays on material delivery, exceeding budget projections and high percentage of material waste. Over the years, additive manufacturing has been a constant topic of discussion, in order to understand the limitations, applications and the overall impact on the cost of construction. In this work it is intended to present/discuss opportunities and challenges and the potential of AM to revolutionize the industry.",

keywords = "3D printing, Additive manufacturing, Building automation, Civil engineering",

author = "A.S. Guimar{\~a}es and J.M.P.Q. Delgado and S.S. Lucas",

note = "Funding Information: This work is financed by National Funds through the FCT – Funda{\c c}{\~a}o para a Ci{\^e}ncia e a Tecnologia (Portuguese Foundation for Science and Technology) within the project MIT-EXPL/TDI/0041/2019. In addition, this work was financially supported by: Base Funding - UIDB/04708/2020 of the CONSTRUCT - Instituto de I\&D em Estruturas e Constru{\c c}{\~o}es - funded by national funds through the FCT/MCTES (PIDDAC). Publisher Copyright: {\textcopyright} 2021 Trans Tech Publications Ltd, Switzerland.",

year = "2021",

month = nov,

doi = "10.4028/www.scientific.net/DDF.412.207",

language = "English",

volume = "412",

pages = "207--216",

journal = "Defect and Diffusion Forum",

issn = "1012-0386",

publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Additive manufacturing on building construction

AU - Guimarães, A.S.

AU - Delgado, J.M.P.Q.

AU - Lucas, S.S.

N1 - Funding Information: This work is financed by National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology) within the project MIT-EXPL/TDI/0041/2019. In addition, this work was financially supported by: Base Funding - UIDB/04708/2020 of the CONSTRUCT - Instituto de I&D em Estruturas e Construções - funded by national funds through the FCT/MCTES (PIDDAC). Publisher Copyright: © 2021 Trans Tech Publications Ltd, Switzerland.

PY - 2021/11

Y1 - 2021/11

N2 - The future of construction will be directly connected with additive manufacturing (AM). It is easy to see the lack of consistency between jobs, labour inefficiency, schedule delays, delays on material delivery, exceeding budget projections and high percentage of material waste. Over the years, additive manufacturing has been a constant topic of discussion, in order to understand the limitations, applications and the overall impact on the cost of construction. In this work it is intended to present/discuss opportunities and challenges and the potential of AM to revolutionize the industry.

AB - The future of construction will be directly connected with additive manufacturing (AM). It is easy to see the lack of consistency between jobs, labour inefficiency, schedule delays, delays on material delivery, exceeding budget projections and high percentage of material waste. Over the years, additive manufacturing has been a constant topic of discussion, in order to understand the limitations, applications and the overall impact on the cost of construction. In this work it is intended to present/discuss opportunities and challenges and the potential of AM to revolutionize the industry.

KW - 3D printing

KW - Additive manufacturing

KW - Building automation

KW - Civil engineering

UR - https://www.scopus.com/pages/publications/85119179339

U2 - 10.4028/www.scientific.net/DDF.412.207

DO - 10.4028/www.scientific.net/DDF.412.207

M3 - Article

AN - SCOPUS:85119179339

SN - 1012-0386

VL - 412

SP - 207

EP - 216

JO - Defect and Diffusion Forum

JF - Defect and Diffusion Forum

ER -

Additive manufacturing on building construction

Samenvatting

Bibliografische nota

Financiering

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit