A three-segment inverse method for the design of CoA correcting TIR collimators

C.R. Prins, J.H.M. Thije Boonkkamp, ten, T.W. Tukker, W.L. IJzerman

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

1 Downloads (Pure)

Uittreksel

Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.
Originele taal-2Engels
TitelProgress in Industrial Mathematics at ECMI 2012
RedacteurenM. Fontes, M. Günther, N. Marheineke
Plaats van productieSwitzerland
UitgeverijSpringer
Pagina's323-328
ISBN van geprinte versie978-3-319-05364-6
DOI's
StatusGepubliceerd - 2014
Evenement17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden - Lund, Zweden
Duur: 23 jul 201227 jul 2012
http://www.maths.lth.se/ecmi/ecmi2012_org/

Publicatie series

NaamMathematics in Industry
Volume19
ISSN van geprinte versie1612-3956

Congres

Congres17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden
Verkorte titelECMI 2012
LandZweden
StadLund
Periode23/07/1227/07/12
Ander17th European Conference on Mathematics for Industry
Internet adres

Vingerafdruk

color
methodology

Citeer dit

Prins, C. R., Thije Boonkkamp, ten, J. H. M., Tukker, T. W., & IJzerman, W. L. (2014). A three-segment inverse method for the design of CoA correcting TIR collimators. In M. Fontes, M. Günther, & N. Marheineke (editors), Progress in Industrial Mathematics at ECMI 2012 (blz. 323-328). (Mathematics in Industry; Vol. 19). Switzerland: Springer. https://doi.org/10.1007/978-3-319-05365-3_44
Prins, C.R. ; Thije Boonkkamp, ten, J.H.M. ; Tukker, T.W. ; IJzerman, W.L. / A three-segment inverse method for the design of CoA correcting TIR collimators. Progress in Industrial Mathematics at ECMI 2012. redacteur / M. Fontes ; M. Günther ; N. Marheineke. Switzerland : Springer, 2014. blz. 323-328 (Mathematics in Industry).
@inproceedings{dce110a8ab0643c9bad60e210a0b33da,
title = "A three-segment inverse method for the design of CoA correcting TIR collimators",
abstract = "Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.",
author = "C.R. Prins and {Thije Boonkkamp, ten}, J.H.M. and T.W. Tukker and W.L. IJzerman",
year = "2014",
doi = "10.1007/978-3-319-05365-3_44",
language = "English",
isbn = "978-3-319-05364-6",
series = "Mathematics in Industry",
publisher = "Springer",
pages = "323--328",
editor = "M. Fontes and M. G{\"u}nther and N. Marheineke",
booktitle = "Progress in Industrial Mathematics at ECMI 2012",
address = "Germany",

}

Prins, CR, Thije Boonkkamp, ten, JHM, Tukker, TW & IJzerman, WL 2014, A three-segment inverse method for the design of CoA correcting TIR collimators. in M Fontes, M Günther & N Marheineke (redactie), Progress in Industrial Mathematics at ECMI 2012. Mathematics in Industry, vol. 19, Springer, Switzerland, blz. 323-328, 17th European Conference on Mathematics for Industry (ECMI 2012), July 23-27, 2012, Lund, Sweden, Lund, Zweden, 23/07/12. https://doi.org/10.1007/978-3-319-05365-3_44

A three-segment inverse method for the design of CoA correcting TIR collimators. / Prins, C.R.; Thije Boonkkamp, ten, J.H.M.; Tukker, T.W.; IJzerman, W.L.

Progress in Industrial Mathematics at ECMI 2012. redactie / M. Fontes; M. Günther; N. Marheineke. Switzerland : Springer, 2014. blz. 323-328 (Mathematics in Industry; Vol. 19).

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

TY - GEN

T1 - A three-segment inverse method for the design of CoA correcting TIR collimators

AU - Prins, C.R.

AU - Thije Boonkkamp, ten, J.H.M.

AU - Tukker, T.W.

AU - IJzerman, W.L.

PY - 2014

Y1 - 2014

N2 - Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.

AB - Color-over-Angle (CoA) variation in the light output of white phosphor- converted LEDs is a common and unsolved problem. Recently, the same authors introduced a new inverse method to reduce CoA variation using a special collimator. This short paper introduces a variant of the method with two important advantages compared to the original method.

U2 - 10.1007/978-3-319-05365-3_44

DO - 10.1007/978-3-319-05365-3_44

M3 - Conference contribution

SN - 978-3-319-05364-6

T3 - Mathematics in Industry

SP - 323

EP - 328

BT - Progress in Industrial Mathematics at ECMI 2012

A2 - Fontes, M.

A2 - Günther, M.

A2 - Marheineke, N.

PB - Springer

CY - Switzerland

ER -

Prins CR, Thije Boonkkamp, ten JHM, Tukker TW, IJzerman WL. A three-segment inverse method for the design of CoA correcting TIR collimators. In Fontes M, Günther M, Marheineke N, redacteurs, Progress in Industrial Mathematics at ECMI 2012. Switzerland: Springer. 2014. blz. 323-328. (Mathematics in Industry). https://doi.org/10.1007/978-3-319-05365-3_44