A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

1 Citaat (Scopus)

Uittreksel

In this paper we present a solid state 0-120 kV microsecond pulse charger for our nanosecond pulse generator [1]. The pulse forming line of our nanosecond pulse generator must be charged with microsecond pulses to prevent pre-firing of its oil spark-gap. The pulse charger consists of two identical compact pulse charger modules with integrated electronics. The electronics are mounted on a compact PCB and consist mainly of a number of parallel connected IGBT's that switch a primary capacitor bank into a pulse transformer. Each pulse charger module can generate 60 kV microsecond pulses into a 250 pF load at 1 kHz repetition rate. Connected together they are able to deliver up to 120 kV into a 100 pF load. This 100 pF load is the pulse forming line of our nanosecond pulse generator at its maximum length of 1 m. The pulse charger is able to operate in an EMI unfriendly environment due to its compact lay-out and optical triggering of the IGBT's.
Originele taal-2Engels
TitelProceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California
Plaats van productiePiscataway
UitgeverijInstitute of Electrical and Electronics Engineers
ISBN van geprinte versie978-1-4673-5168-3
DOI's
StatusGepubliceerd - 2013
Evenement19th IEEE Pulsed Power Conference (PPC2013), 16 - 21 June 2013, San Francisco, CA, USA - San Francisco, Verenigde Staten van Amerika
Duur: 16 jun 201321 jun 2013

Congres

Congres19th IEEE Pulsed Power Conference (PPC2013), 16 - 21 June 2013, San Francisco, CA, USA
Verkorte titelPPC 2013
LandVerenigde Staten van Amerika
StadSan Francisco
Periode16/06/1321/06/13
AnderPulsed Power Conference (PPC), 2013 19th IEEE

Vingerafdruk

solid state
pulses
pulse generators
modules
spark gaps
polychlorinated biphenyls
electronics
transformers
repetition
capacitors
oils

Citeer dit

Huiskamp, T., Beckers, F. J. C. M., Heesch, van, E. J. M., & Pemen, A. J. M. (2013). A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source. In Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California Piscataway: Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/PPC.2013.6627617
Huiskamp, T. ; Beckers, F.J.C.M. ; Heesch, van, E.J.M. ; Pemen, A.J.M. / A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source. Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California. Piscataway : Institute of Electrical and Electronics Engineers, 2013.
@inproceedings{34ddac8e2ebb4abab3c5561199cda288,
title = "A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source",
abstract = "In this paper we present a solid state 0-120 kV microsecond pulse charger for our nanosecond pulse generator [1]. The pulse forming line of our nanosecond pulse generator must be charged with microsecond pulses to prevent pre-firing of its oil spark-gap. The pulse charger consists of two identical compact pulse charger modules with integrated electronics. The electronics are mounted on a compact PCB and consist mainly of a number of parallel connected IGBT's that switch a primary capacitor bank into a pulse transformer. Each pulse charger module can generate 60 kV microsecond pulses into a 250 pF load at 1 kHz repetition rate. Connected together they are able to deliver up to 120 kV into a 100 pF load. This 100 pF load is the pulse forming line of our nanosecond pulse generator at its maximum length of 1 m. The pulse charger is able to operate in an EMI unfriendly environment due to its compact lay-out and optical triggering of the IGBT's.",
author = "T. Huiskamp and F.J.C.M. Beckers and {Heesch, van}, E.J.M. and A.J.M. Pemen",
year = "2013",
doi = "10.1109/PPC.2013.6627617",
language = "English",
isbn = "978-1-4673-5168-3",
booktitle = "Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

Huiskamp, T, Beckers, FJCM, Heesch, van, EJM & Pemen, AJM 2013, A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source. in Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California. Institute of Electrical and Electronics Engineers, Piscataway, 19th IEEE Pulsed Power Conference (PPC2013), 16 - 21 June 2013, San Francisco, CA, USA, San Francisco, Verenigde Staten van Amerika, 16/06/13. https://doi.org/10.1109/PPC.2013.6627617

A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source. / Huiskamp, T.; Beckers, F.J.C.M.; Heesch, van, E.J.M.; Pemen, A.J.M.

Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California. Piscataway : Institute of Electrical and Electronics Engineers, 2013.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

TY - GEN

T1 - A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source

AU - Huiskamp, T.

AU - Beckers, F.J.C.M.

AU - Heesch, van, E.J.M.

AU - Pemen, A.J.M.

PY - 2013

Y1 - 2013

N2 - In this paper we present a solid state 0-120 kV microsecond pulse charger for our nanosecond pulse generator [1]. The pulse forming line of our nanosecond pulse generator must be charged with microsecond pulses to prevent pre-firing of its oil spark-gap. The pulse charger consists of two identical compact pulse charger modules with integrated electronics. The electronics are mounted on a compact PCB and consist mainly of a number of parallel connected IGBT's that switch a primary capacitor bank into a pulse transformer. Each pulse charger module can generate 60 kV microsecond pulses into a 250 pF load at 1 kHz repetition rate. Connected together they are able to deliver up to 120 kV into a 100 pF load. This 100 pF load is the pulse forming line of our nanosecond pulse generator at its maximum length of 1 m. The pulse charger is able to operate in an EMI unfriendly environment due to its compact lay-out and optical triggering of the IGBT's.

AB - In this paper we present a solid state 0-120 kV microsecond pulse charger for our nanosecond pulse generator [1]. The pulse forming line of our nanosecond pulse generator must be charged with microsecond pulses to prevent pre-firing of its oil spark-gap. The pulse charger consists of two identical compact pulse charger modules with integrated electronics. The electronics are mounted on a compact PCB and consist mainly of a number of parallel connected IGBT's that switch a primary capacitor bank into a pulse transformer. Each pulse charger module can generate 60 kV microsecond pulses into a 250 pF load at 1 kHz repetition rate. Connected together they are able to deliver up to 120 kV into a 100 pF load. This 100 pF load is the pulse forming line of our nanosecond pulse generator at its maximum length of 1 m. The pulse charger is able to operate in an EMI unfriendly environment due to its compact lay-out and optical triggering of the IGBT's.

U2 - 10.1109/PPC.2013.6627617

DO - 10.1109/PPC.2013.6627617

M3 - Conference contribution

SN - 978-1-4673-5168-3

BT - Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Huiskamp T, Beckers FJCM, Heesch, van EJM, Pemen AJM. A solid state, 120 kV microsecond pulse charger for a 1–10 nanosecond pulse source. In Proceedings of the 2013 19th IEEE Pulsed Power Conference (PPC), 16-21 June 2013, San Francisco, California. Piscataway: Institute of Electrical and Electronics Engineers. 2013 https://doi.org/10.1109/PPC.2013.6627617