A robust-control-relevant model validation approach for continuously variable transmission control

T.A.E. Oomen, S.H. Meulen, van der, O.H. Bosgra, M. Steinbuch, J. Elfring

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

5 Citaten (Scopus)
5 Downloads (Pure)

Samenvatting

High performance continuously variable transmission (CVT) operation requires a reliable control design for its actuation system. The aim of the present paper is to design a high performance robust controller for a range of operating conditions. High performance robust control is achieved by identifying a robust-control-relevant model set that represents the relevant dynamics of the actuation system for a range of operating conditions. Specifically, a new coordinate frame for representing model uncertainty is adopted that transparently connects the size of the model uncertainty and the control criterion, consequently a nonconservative control design can be obtained. Subsequent robust control synthesis reveals that robust performance has been significantly improved over the entire operating range, with respect to both the criterion value and relevant simulated and measured closed-loop step responses.
Originele taal-2Engels
TitelProceedings of the 2010 American Control Conference (ACC 2010), 30 June 30 - 2 July 2010, Baltimore, Maryland, USA
Plaats van productieUnited States, Baltimore, MD
UitgeverijInstitute of Electrical and Electronics Engineers
Pagina's3518-3523
ISBN van geprinte versie978-1-4244-7425-7
DOI's
StatusGepubliceerd - 2010

Vingerafdruk Duik in de onderzoeksthema's van 'A robust-control-relevant model validation approach for continuously variable transmission control'. Samen vormen ze een unieke vingerafdruk.

  • Citeer dit

    Oomen, T. A. E., Meulen, van der, S. H., Bosgra, O. H., Steinbuch, M., & Elfring, J. (2010). A robust-control-relevant model validation approach for continuously variable transmission control. In Proceedings of the 2010 American Control Conference (ACC 2010), 30 June 30 - 2 July 2010, Baltimore, Maryland, USA (blz. 3518-3523). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ACC.2010.5530978