A cost-effective multi-band LC oscillator for low-IF FM radio receivers

J.D. Tang, van der; D. Kasperkovitz; H. van Rumpt; A.H.M. Roermund, van

A cost-effective multi-band LC oscillator for low-IF FM radio receivers

J.D. Tang, van der
, D. Kasperkovitz
, H. van Rumpt
, A.H.M. Roermund, van

Integrated Circuits

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

11 Citaten (Scopus)

Samenvatting

A cost-effective LC oscillator for a low-IF FM radio receiver has been realized. The FM radio receiver is fully integrated, except for two PCB-coils of the oscillator resonator. These coils enable easy adaption of the center frequency for various FM applications, for example for the Japanese FM band. The oscillator runs at twice the FM radio frequency band and covers a range of 158 MHz to 232 MHz, which is more than 38% tuning range. The phase noise to carrier ratio L(10kHz) is better than -101 dBc/Hz after division of the oscillator frequency by two. The LC resonator consists of 2 × 10 integrated band-switches, two integrated continuous varactors, and a combination of off-chip printed PCB-coils and bond-wire inductances. The composite balanced inductor has reduced overall spread compared to a bond-wire-only solution. An 11 GHz f T BiCMOS process is used for implementation, and the oscillator dissipates less than 6.1 mW with a supply voltage of 2.7 V.

Originele taal-2	Engels
Titel	Proceedings of the 28th European Solid-State Circuit Conference, Firenze, Italy
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	819-822
Status	Gepubliceerd - 2002

Citeer dit

@inproceedings{c132a9046dd34b73ac72a0d3683f3daa,

title = "A cost-effective multi-band LC oscillator for low-IF FM radio receivers",

abstract = "A cost-effective LC oscillator for a low-IF FM radio receiver has been realized. The FM radio receiver is fully integrated, except for two PCB-coils of the oscillator resonator. These coils enable easy adaption of the center frequency for various FM applications, for example for the Japanese FM band. The oscillator runs at twice the FM radio frequency band and covers a range of 158 MHz to 232 MHz, which is more than 38\% tuning range. The phase noise to carrier ratio L(10kHz) is better than -101 dBc/Hz after division of the oscillator frequency by two. The LC resonator consists of 2 × 10 integrated band-switches, two integrated continuous varactors, and a combination of off-chip printed PCB-coils and bond-wire inductances. The composite balanced inductor has reduced overall spread compared to a bond-wire-only solution. An 11 GHz f T BiCMOS process is used for implementation, and the oscillator dissipates less than 6.1 mW with a supply voltage of 2.7 V.",

author = "\{Tang, van der\}, J.D. and D. Kasperkovitz and \{van Rumpt\}, H. and \{Roermund, van\}, A.H.M.",

year = "2002",

language = "English",

pages = "819--822",

booktitle = "Proceedings of the 28th European Solid-State Circuit Conference, Firenze, Italy",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

}

A cost-effective multi-band LC oscillator for low-IF FM radio receivers. / Tang, van der, J.D.; Kasperkovitz, D.; van Rumpt, H. et al.
Proceedings of the 28th European Solid-State Circuit Conference, Firenze, Italy. Piscataway: Institute of Electrical and Electronics Engineers, 2002. blz. 819-822.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - A cost-effective multi-band LC oscillator for low-IF FM radio receivers

AU - Tang, van der, J.D.

AU - Kasperkovitz, D.

AU - van Rumpt, H.

AU - Roermund, van, A.H.M.

PY - 2002

Y1 - 2002

N2 - A cost-effective LC oscillator for a low-IF FM radio receiver has been realized. The FM radio receiver is fully integrated, except for two PCB-coils of the oscillator resonator. These coils enable easy adaption of the center frequency for various FM applications, for example for the Japanese FM band. The oscillator runs at twice the FM radio frequency band and covers a range of 158 MHz to 232 MHz, which is more than 38% tuning range. The phase noise to carrier ratio L(10kHz) is better than -101 dBc/Hz after division of the oscillator frequency by two. The LC resonator consists of 2 × 10 integrated band-switches, two integrated continuous varactors, and a combination of off-chip printed PCB-coils and bond-wire inductances. The composite balanced inductor has reduced overall spread compared to a bond-wire-only solution. An 11 GHz f T BiCMOS process is used for implementation, and the oscillator dissipates less than 6.1 mW with a supply voltage of 2.7 V.

AB - A cost-effective LC oscillator for a low-IF FM radio receiver has been realized. The FM radio receiver is fully integrated, except for two PCB-coils of the oscillator resonator. These coils enable easy adaption of the center frequency for various FM applications, for example for the Japanese FM band. The oscillator runs at twice the FM radio frequency band and covers a range of 158 MHz to 232 MHz, which is more than 38% tuning range. The phase noise to carrier ratio L(10kHz) is better than -101 dBc/Hz after division of the oscillator frequency by two. The LC resonator consists of 2 × 10 integrated band-switches, two integrated continuous varactors, and a combination of off-chip printed PCB-coils and bond-wire inductances. The composite balanced inductor has reduced overall spread compared to a bond-wire-only solution. An 11 GHz f T BiCMOS process is used for implementation, and the oscillator dissipates less than 6.1 mW with a supply voltage of 2.7 V.

M3 - Conference contribution

SP - 819

EP - 822

BT - Proceedings of the 28th European Solid-State Circuit Conference, Firenze, Italy

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

A cost-effective multi-band LC oscillator for low-IF FM radio receivers

Samenvatting

Vingerafdruk

Citeer dit