A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs

Mohammad Zulqarnain; Stefano Stanzione; Jan Laurens P.J. van der Steen; Gerwin H. Gelinck; Kris Myny; S. Abdinia; E. Cantatore

doi:10.1109/ESSCIRC.2018.8494298

A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs

Mohammad Zulqarnain
, Stefano Stanzione
, Jan Laurens P.J. van der Steen
, Gerwin H. Gelinck
, Kris Myny
, S. Abdinia
, E. Cantatore

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

29 Citaten (Scopus)

Samenvatting

This paper presents a 52 μW heart-rate measurement interface for wearable applications, fabricated on a flexible foil with a-IGZO TFTs. The interface consists of a cascaded diode-connected load preamplifier with a gain of 22 dB in 3 kHz bandwidth. The output is provided as a binary PWM waveform, which can be sent to a reader device using wireless communication. Voltage to pulse-width conversion is achieved with a simple and power minimalistic approach, which exploits a reset integrator. Experimental characterization demonstrates an overall low-frequency gain of the system equal to 25 msec/V and an input referred noise of 186.3 μV rms. In-vivo measurements have been performed, resulting in a 60 bpm heart-rate for a person at rest.

Originele taal-2	Engels
Titel	ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference
Plaats van productie	Piscataway
Uitgeverij	Institute of Electrical and Electronics Engineers
Pagina's	222-225
Aantal pagina's	4
ISBN van elektronische versie	978-1-5386-5404-0
DOI's	https://doi.org/10.1109/ESSCIRC.2018.8494298
Status	Gepubliceerd - 16 okt. 2018
Evenement	44th European Solid State Circuits Conference (ESSCIRC 2018) - Dresden, Duitsland Duur: 3 sep. 2018 → 6 sep. 2018 Congresnummer: 44

Congres

Congres	44th European Solid State Circuits Conference (ESSCIRC 2018)
Verkorte titel	ESSCIRC 2018
Land/Regio	Duitsland
Stad	Dresden
Periode	3/09/18 → 6/09/18

Toegang tot document

10.1109/ESSCIRC.2018.8494298

Andere bestanden en links

Link to publication in Scopus

Citeer dit

Zulqarnain, M., Stanzione, S., van der Steen, J. L. P. J., Gelinck, G. H., Myny, K., Abdinia, S., & Cantatore, E. (2018). A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs. In ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference (blz. 222-225). Artikel 8494298 Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ESSCIRC.2018.8494298

@inproceedings{fc29b7c1f3a34e7193109c1e3f58f883,

title = "A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs",

abstract = "This paper presents a 52 μW heart-rate measurement interface for wearable applications, fabricated on a flexible foil with a-IGZO TFTs. The interface consists of a cascaded diode-connected load preamplifier with a gain of 22 dB in 3 kHz bandwidth. The output is provided as a binary PWM waveform, which can be sent to a reader device using wireless communication. Voltage to pulse-width conversion is achieved with a simple and power minimalistic approach, which exploits a reset integrator. Experimental characterization demonstrates an overall low-frequency gain of the system equal to 25 msec/V and an input referred noise of 186.3 μV rms. In-vivo measurements have been performed, resulting in a 60 bpm heart-rate for a person at rest.",

keywords = "1/f noise, IGZO, PWM, bio-signal read out, voltage to pulse width conversion",

author = "Mohammad Zulqarnain and Stefano Stanzione and \{van der Steen\}, \{Jan Laurens P.J.\} and Gelinck, \{Gerwin H.\} and Kris Myny and S. Abdinia and E. Cantatore",

year = "2018",

month = oct,

day = "16",

doi = "10.1109/ESSCIRC.2018.8494298",

language = "English",

pages = "222--225",

booktitle = "ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference",

publisher = "Institute of Electrical and Electronics Engineers",

address = "United States",

note = "44th European Solid State Circuits Conference (ESSCIRC 2018), ESSCIRC 2018 ; Conference date: 03-09-2018 Through 06-09-2018",

}

Zulqarnain, M, Stanzione, S, van der Steen, JLPJ, Gelinck, GH, Myny, K, Abdinia, S & Cantatore, E 2018, A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs. in ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference., 8494298, Institute of Electrical and Electronics Engineers, Piscataway, blz. 222-225, 44th European Solid State Circuits Conference (ESSCIRC 2018), Dresden, Duitsland, 3/09/18. https://doi.org/10.1109/ESSCIRC.2018.8494298

A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs. / Zulqarnain, Mohammad; Stanzione, Stefano; van der Steen, Jan Laurens P.J. et al.
ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference. Piscataway: Institute of Electrical and Electronics Engineers, 2018. blz. 222-225 8494298.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/Congresprocedure › Conferentiebijdrage › Academic › peer review

TY - GEN

T1 - A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs

AU - Zulqarnain, Mohammad

AU - Stanzione, Stefano

AU - van der Steen, Jan Laurens P.J.

AU - Gelinck, Gerwin H.

AU - Myny, Kris

AU - Abdinia, S.

AU - Cantatore, E.

N1 - Conference code: 44

PY - 2018/10/16

Y1 - 2018/10/16

N2 - This paper presents a 52 μW heart-rate measurement interface for wearable applications, fabricated on a flexible foil with a-IGZO TFTs. The interface consists of a cascaded diode-connected load preamplifier with a gain of 22 dB in 3 kHz bandwidth. The output is provided as a binary PWM waveform, which can be sent to a reader device using wireless communication. Voltage to pulse-width conversion is achieved with a simple and power minimalistic approach, which exploits a reset integrator. Experimental characterization demonstrates an overall low-frequency gain of the system equal to 25 msec/V and an input referred noise of 186.3 μV rms. In-vivo measurements have been performed, resulting in a 60 bpm heart-rate for a person at rest.

AB - This paper presents a 52 μW heart-rate measurement interface for wearable applications, fabricated on a flexible foil with a-IGZO TFTs. The interface consists of a cascaded diode-connected load preamplifier with a gain of 22 dB in 3 kHz bandwidth. The output is provided as a binary PWM waveform, which can be sent to a reader device using wireless communication. Voltage to pulse-width conversion is achieved with a simple and power minimalistic approach, which exploits a reset integrator. Experimental characterization demonstrates an overall low-frequency gain of the system equal to 25 msec/V and an input referred noise of 186.3 μV rms. In-vivo measurements have been performed, resulting in a 60 bpm heart-rate for a person at rest.

KW - 1/f noise

KW - IGZO

KW - PWM

KW - bio-signal read out

KW - voltage to pulse width conversion

UR - https://www.scopus.com/pages/publications/85056791866

U2 - 10.1109/ESSCIRC.2018.8494298

DO - 10.1109/ESSCIRC.2018.8494298

M3 - Conference contribution

SP - 222

EP - 225

BT - ESSCIRC 2018 - IEEE 44th European Solid State Circuits Conference

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

T2 - 44th European Solid State Circuits Conference (ESSCIRC 2018)

Y2 - 3 September 2018 through 6 September 2018

ER -

A 52 µW heart-rate measurement interface fabricated on a flexible foil with A-IGZO TFTs

Samenvatting

Congres

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit