10ns start-up techniques for a duty cycled impulse radio receiver

C. Zhou, P.J.A. Harpe, Xiaoyan Wang, K.J.P. Philips, H.W.H. Groot, de

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

5 Citaties (Scopus)

Uittreksel

This paper presents fast start-up techniques for duty cycled Impulse Radio receivers. Three different techniques are used to improve the start-up time of individual blocks. DC coupling between the mixer and the VGA is used to ensure a fast start-up time for the whole chain, resulting in an overall start-up time below 10ns. This is the fastest startup time reported for duty cycled Impulse Radio receivers. Moreover, to the best of our knowledge, this is the first paper to detail the start-up techniques that enable ultra-low power consumption in this class of receivers. The measured power consumption is scaling proportionally to the duty cycling rate from 46mW in continuous mode down to 58uW for
Originele taal-2Engels
TitelProceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France
Plaats van productiePiscataway
UitgeverijInstitute of Electrical and Electronics Engineers
Pagina's426-429
ISBN van geprinte versie978-1-4673-2213-3
DOI's
StatusGepubliceerd - 2012
Evenement38th European Solid-State Circuits Conference (ESSCIRC 2012) - Bordeaux Convention Center, Bordeaux, Frankrijk
Duur: 17 sep 201221 sep 2012
Congresnummer: 38

Congres

Congres38th European Solid-State Circuits Conference (ESSCIRC 2012)
Verkorte titelESSCIRC 2012
LandFrankrijk
StadBordeaux
Periode17/09/1221/09/12
AnderThe 38th European Solid-State Circuits Conference (ESSCIRC 2012) 17-21 September 2012, Bordeaux, France,

Vingerafdruk

Radio receivers
Electric power utilization

Citeer dit

Zhou, C., Harpe, P. J. A., Wang, X., Philips, K. J. P., & Groot, de, H. W. H. (2012). 10ns start-up techniques for a duty cycled impulse radio receiver. In Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France (blz. 426-429). Piscataway: Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ESSCIRC.2012.6341346
Zhou, C. ; Harpe, P.J.A. ; Wang, Xiaoyan ; Philips, K.J.P. ; Groot, de, H.W.H. / 10ns start-up techniques for a duty cycled impulse radio receiver. Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France. Piscataway : Institute of Electrical and Electronics Engineers, 2012. blz. 426-429
@inproceedings{bba20ed9a1774ff48f61b4307cca5113,
title = "10ns start-up techniques for a duty cycled impulse radio receiver",
abstract = "This paper presents fast start-up techniques for duty cycled Impulse Radio receivers. Three different techniques are used to improve the start-up time of individual blocks. DC coupling between the mixer and the VGA is used to ensure a fast start-up time for the whole chain, resulting in an overall start-up time below 10ns. This is the fastest startup time reported for duty cycled Impulse Radio receivers. Moreover, to the best of our knowledge, this is the first paper to detail the start-up techniques that enable ultra-low power consumption in this class of receivers. The measured power consumption is scaling proportionally to the duty cycling rate from 46mW in continuous mode down to 58uW for",
author = "C. Zhou and P.J.A. Harpe and Xiaoyan Wang and K.J.P. Philips and {Groot, de}, H.W.H.",
year = "2012",
doi = "10.1109/ESSCIRC.2012.6341346",
language = "English",
isbn = "978-1-4673-2213-3",
pages = "426--429",
booktitle = "Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

Zhou, C, Harpe, PJA, Wang, X, Philips, KJP & Groot, de, HWH 2012, 10ns start-up techniques for a duty cycled impulse radio receiver. in Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France. Institute of Electrical and Electronics Engineers, Piscataway, blz. 426-429, Bordeaux, Frankrijk, 17/09/12. https://doi.org/10.1109/ESSCIRC.2012.6341346

10ns start-up techniques for a duty cycled impulse radio receiver. / Zhou, C.; Harpe, P.J.A.; Wang, Xiaoyan; Philips, K.J.P.; Groot, de, H.W.H.

Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France. Piscataway : Institute of Electrical and Electronics Engineers, 2012. blz. 426-429.

Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

TY - GEN

T1 - 10ns start-up techniques for a duty cycled impulse radio receiver

AU - Zhou, C.

AU - Harpe, P.J.A.

AU - Wang, Xiaoyan

AU - Philips, K.J.P.

AU - Groot, de, H.W.H.

PY - 2012

Y1 - 2012

N2 - This paper presents fast start-up techniques for duty cycled Impulse Radio receivers. Three different techniques are used to improve the start-up time of individual blocks. DC coupling between the mixer and the VGA is used to ensure a fast start-up time for the whole chain, resulting in an overall start-up time below 10ns. This is the fastest startup time reported for duty cycled Impulse Radio receivers. Moreover, to the best of our knowledge, this is the first paper to detail the start-up techniques that enable ultra-low power consumption in this class of receivers. The measured power consumption is scaling proportionally to the duty cycling rate from 46mW in continuous mode down to 58uW for

AB - This paper presents fast start-up techniques for duty cycled Impulse Radio receivers. Three different techniques are used to improve the start-up time of individual blocks. DC coupling between the mixer and the VGA is used to ensure a fast start-up time for the whole chain, resulting in an overall start-up time below 10ns. This is the fastest startup time reported for duty cycled Impulse Radio receivers. Moreover, to the best of our knowledge, this is the first paper to detail the start-up techniques that enable ultra-low power consumption in this class of receivers. The measured power consumption is scaling proportionally to the duty cycling rate from 46mW in continuous mode down to 58uW for

U2 - 10.1109/ESSCIRC.2012.6341346

DO - 10.1109/ESSCIRC.2012.6341346

M3 - Conference contribution

SN - 978-1-4673-2213-3

SP - 426

EP - 429

BT - Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France

PB - Institute of Electrical and Electronics Engineers

CY - Piscataway

ER -

Zhou C, Harpe PJA, Wang X, Philips KJP, Groot, de HWH. 10ns start-up techniques for a duty cycled impulse radio receiver. In Proceedings of the 38th European Solid-State Circuits Conference (ESSCIRC 2012), 17-21 September 2012, Bordeaux, France. Piscataway: Institute of Electrical and Electronics Engineers. 2012. blz. 426-429 https://doi.org/10.1109/ESSCIRC.2012.6341346