• 155 Citaties
20012020

Research output per year

Als u wijzigingen in Pure hebt gemaakt, zullen deze hier binnenkort zichtbaar zijn.

Persoonlijk profiel

Quote

The Microfablab is the place where education and research interact in a natural way.

Research profile

Erik (F.G.A.) Homburg is an assistant professor with the Microsystems research group at the department of Mechanical Engineering, where innovative technological concepts and fabrication methods are developed for microsystems for a wide range of applications. His research interests lie in the field of the design of mechanical microsystems. These microsystems are complex by nature: they combine many aspects, like sensing, actuation, microfluidics, magnetic fields and active materials. As a designer, he relies on a broad technical background in order to realize a complete design cycle: concepting, simulation, realization, measurement techniques and evaluation. He is a key user of the Microfablab, where he exploits the possibilities of prototyping processes like laser machining and the printing of various materials and the availability of different measurement techniques. He is currently employed for two days per week.

Academic background

Erik Homburg studied Mechanical Engineering at Eindhoven University of Technology (TU/e), where he obtained his MSc in 1980. He then became a researcher at Philips Research and, in 1987, a systems designer in the field of opto-mechatronics within Philips Optical Storage. In 2000, he was appointed as assistant professor at TU/e, currently with the Microsystems research group at the department of Mechanical Engineering.

Vingerafdruk Verdiep u in de onderzoeksgebieden waarop F.G.A. (Erik) Homburg actief is. Deze onderwerplabels komen uit het werk van deze persoon. Samen vormen ze een unieke vingerafdruk.

  • 1 Soortgelijke profielen

Netwerk Recente externe samenwerking op landenniveau. Duik in de details door op de stippen te klikken.

Onderzoeksoutput

3D sugar printing of networks mimicking the vasculature

Pollet, A. M. A. O., Homburg, E. F. G. A., Cardinaels, R. & den Toonder, J. M. J., 1 jan 2020, In : Micromachines. 11, 1, 22 blz., 43.

Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

Open Access
Bestand
  • 17 Downloads (Pure)

    A soft transporter robot fueled by light

    Pilz Da Cunha, M., Ambergen, S., Debije, M. G., Homburg, F. G. A. E., den Toonder, J. M. J. & Schenning, A. P. H. J., 1 mrt 2020, In : Advanced Science. 7, 5, 7 blz., 1902842.

    Onderzoeksoutput: Bijdrage aan tijdschriftTijdschriftartikelAcademicpeer review

    Open Access
    Bestand
  • 18 Downloads (Pure)
    Open Access
    Bestand
  • Investigation of stencil/ screen printing of silver (Ag) electrodes for ionic polymer metal composites (IPMCs)

    Sideris, E. A., Augoulas, E. I., Homburg, E., van Maris, M. P. & de Lange, R. C., 13 mrt 2019, Electroactive Polymer Actuators and Devices (EAPAD) XXI. Bar-Cohen, Y., Anderson, I. A. & Johnson, N. L. (redactie). SPIE, 7 blz. 1096607. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10966).

    Onderzoeksoutput: Hoofdstuk in Boek/Rapport/CongresprocedureConferentiebijdrageAcademicpeer review

  • Cursussen

    Engineering Design

    1/09/14 → …

    Cursus

    Microfabrication methods

    1/09/15 → …

    Cursus

    Peristaltic pump

    1/09/17 → …

    Cursus

    Scriptie

    An analysis towards shock robustness in an optical disc drive

    Auteur: Coolen, R., 30 sep 2003

    Begeleider: Steinbuch, M. (Afstudeerdocent 1), Homburg, F. (Afstudeerdocent 2), Nuij, P. (Afstudeerdocent 2), Leenknegt, G. (Afstudeerdocent 2), Heertjes, M. (Afstudeerdocent 2) & Cremers, F. (Externe persoon) (Afstudeerdocent 2)

    Scriptie/masterproef: Master

    A new setup for fast carbon nanotube growth: rapid thermal control and in-situ monitoring

    Auteur: van Laake, L., 31 mei 2006

    Begeleider: Dietzel, A. (Afstudeerdocent 1), Geers, M. (Afstudeerdocent 2), Bellouard, Y. (Afstudeerdocent 2) & Homburg, F. (Afstudeerdocent 2)

    Scriptie/masterproef: Master

    Concept design for reel to reel flex foil handling on a component mounting machine

    Auteur: Wakker, R., 31 aug 2005

    Begeleider: Steinbuch, M. (Afstudeerdocent 1), Rosielle, P. (Afstudeerdocent 2), Wesseling, W. (Externe persoon) (Externe coach) & Homburg, F. (Afstudeerdocent 2)

    Scriptie/masterproef: Master

    Bestand

    Design and optimization of a fast tool demonstrator

    Auteur: Geurts, D., 30 nov 2008

    Begeleider: Homburg, F. (Afstudeerdocent 1)

    Scriptie/masterproef: Master

    Design of a continuous motion inkjet printer for full-color printing of cylindrical products

    Auteur: Lamers, M., 30 jun 2012

    Begeleider: Steinbuch, M. (Afstudeerdocent 1), Rosielle, P. (Afstudeerdocent 2), Homburg, F. (Afstudeerdocent 2) & Poels, P. (Externe coach)

    Scriptie/masterproef: Master