Gas Permeation Pilot

Uitrusting/faciliteit: Uitrusting

    Uitrustingsdetails

    Tekst

    Introduction

    Gas permeation is the transport of gas molecules through a membrane material. The permeability and selectivity are the key characteristics to describe the membrane performance. The purpose of the gas permeation pilot is to measure both the permeability and selectivity of pure as well mixed gasses at various temperatures, pressures and flow rates.

    Principle

    Gas is supplied to the membrane cell at a set temperature, pressure and stage cut. In the membrane cell selective transport of the gasses occurs. Using single gasses the permeation rate is calculated by the pressure decay method. In case of mixed gasses the permeation rate is calculated based on the analyses of the feed and permeate using a micro GC-analyzer.

    Advantages of this system

    • Highly flexible and compact
    • Possibility to measure 4 membranes simultaneously
    • Suitable for hollow fiber and flat sheet membranes
    • Single and mixed gas measurements incl. CO and H2S • High temperature and high pressure measurements
    • Pressure decay or sweep gas method

    Applications

    • Natural gas sweetening
    • Biogas upgrading
    • CO conversion to fuels and chemical building blocks 2
    • O2 /N2 separation

    Details

    NaamInspector Mixed GP “Titan”
    FabrikantenConvergence

    Vingerafdruk Verken de onderzoeksgebieden waarvoor deze uitrusting is gebruikt. Deze labels worden gegenereerd op basis van de gerelateerde outputs. Samen vormen ze een unieke vingerafdruk.