Wake-up Receiver System Level Design

Maarten Lont; Dusan Milosevic; Arthur van Roermund

doi:10.1007/978-3-319-06450-5_3

Wake-up Receiver System Level Design

Maarten Lont
, Dusan Milosevic
, Arthur van Roermund

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

1 Citation (Scopus)

Abstract

The modulation and wake-up receiver specifications are studied in this chapter. In the first section a state-of-the-art low-power receiver literature survey is presented. Wideband-FSK modulation is proposed to be used in conjunction with a zero-IF architecture, since it alleviates the receiver imperfections such as 1/f noise, DC offset, I/Q imbalance and phase-noise problems. A mathematical model for the wideband-FSK modulation including is derived in this chapter. It is used to model the effects of receiver imperfections on the SNR and bit-error-rate at the output of the receiver.

Original language	English
Title of host publication	Analog Circuits and Signal Processing
Publisher	Springer
Pages	29-59
Number of pages	31
DOIs	https://doi.org/10.1007/978-3-319-06450-5_3
Publication status	Published - 29 May 2014

Publication series

Name	Analog Circuits and Signal Processing
ISSN (Print)	1872-082X
ISSN (Electronic)	2197-1854

Bibliographical note

Publisher Copyright:
© 2014, Springer International Publishing Switzerland.

Copyright:
Copyright 2021 Elsevier B.V., All rights reserved.

Keywords

Bulk Acoustic Wave
Noise Figure
Noise Power Spectral Density
Phase Noise
Power Spectral Density

Access to Document

10.1007/978-3-319-06450-5_3

Cite this

@inbook{cfb5d7365bdb4270badbfe13b026642a,

title = "Wake-up Receiver System Level Design",

abstract = "The modulation and wake-up receiver specifications are studied in this chapter. In the first section a state-of-the-art low-power receiver literature survey is presented. Wideband-FSK modulation is proposed to be used in conjunction with a zero-IF architecture, since it alleviates the receiver imperfections such as 1/f noise, DC offset, I/Q imbalance and phase-noise problems. A mathematical model for the wideband-FSK modulation including is derived in this chapter. It is used to model the effects of receiver imperfections on the SNR and bit-error-rate at the output of the receiver.",

keywords = "Bulk Acoustic Wave, Noise Figure, Noise Power Spectral Density, Phase Noise, Power Spectral Density",

author = "Maarten Lont and Dusan Milosevic and \{van Roermund\}, Arthur",

year = "2014",

month = may,

day = "29",

doi = "10.1007/978-3-319-06450-5\_3",

language = "English",

series = "Analog Circuits and Signal Processing",

publisher = "Springer",

pages = "29--59",

booktitle = "Analog Circuits and Signal Processing",

address = "Germany",

}

TY - CHAP

T1 - Wake-up Receiver System Level Design

AU - Lont, Maarten

AU - Milosevic, Dusan

AU - van Roermund, Arthur

PY - 2014/5/29

Y1 - 2014/5/29

N2 - The modulation and wake-up receiver specifications are studied in this chapter. In the first section a state-of-the-art low-power receiver literature survey is presented. Wideband-FSK modulation is proposed to be used in conjunction with a zero-IF architecture, since it alleviates the receiver imperfections such as 1/f noise, DC offset, I/Q imbalance and phase-noise problems. A mathematical model for the wideband-FSK modulation including is derived in this chapter. It is used to model the effects of receiver imperfections on the SNR and bit-error-rate at the output of the receiver.

AB - The modulation and wake-up receiver specifications are studied in this chapter. In the first section a state-of-the-art low-power receiver literature survey is presented. Wideband-FSK modulation is proposed to be used in conjunction with a zero-IF architecture, since it alleviates the receiver imperfections such as 1/f noise, DC offset, I/Q imbalance and phase-noise problems. A mathematical model for the wideband-FSK modulation including is derived in this chapter. It is used to model the effects of receiver imperfections on the SNR and bit-error-rate at the output of the receiver.

KW - Bulk Acoustic Wave

KW - Noise Figure

KW - Noise Power Spectral Density

KW - Phase Noise

KW - Power Spectral Density

UR - https://www.scopus.com/pages/publications/85103955251

U2 - 10.1007/978-3-319-06450-5_3

DO - 10.1007/978-3-319-06450-5_3

M3 - Chapter

AN - SCOPUS:85103955251

T3 - Analog Circuits and Signal Processing

SP - 29

EP - 59

BT - Analog Circuits and Signal Processing

PB - Springer

ER -

Wake-up Receiver System Level Design

Abstract

Publication series

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this