The brazing of Si3N4 with Ni-Cr-Si alloys

G. Ceccone; M.G. Nicholas; S.D. Peteves; A. Kodentsov; J. Kivilahti; F.J.J. Loo, van

doi:10.1016/0955-2219(95)00015-M

The brazing of Si3N4 with Ni-Cr-Si alloys

G. Ceccone, M.G. Nicholas, S.D. Peteves, A. Kodentsov, J. Kivilahti, F.J.J. Loo, van

Materials and Interface Chemistry

Research output: Contribution to journal › Article › Academic › peer-review

40 Citations (Scopus)

482 Downloads (Pure)

Abstract

The use of commercially available and laboratory made Ni-Si-Cr brazes for wetting and bonding Si3N4 has been explored. The microstructure and chemistry of brazed joints has been characterized by techniques such as optical microscopy, scanning electron microscopy, electron probe micro-analysis and X-ray diffraction. Si3N4 was wetted well by all the braze alloys at 1150–1200 °C, but the joint quality obtained was poor because of the formation of brittle phases and solid solutions.

Original language	English
Pages (from-to)	563-572
Journal	Journal of the European Ceramic Society
Volume	15
DOIs	https://doi.org/10.1016/0955-2219(95)00015-M
Publication status	Published - 1995

Access to Document

10.1016/0955-2219(95)00015-M

617552Final published version, 1.3 MB

Cite this

@article{5f74039ede034444a97abe7eb2c89103,

title = "The brazing of Si3N4 with Ni-Cr-Si alloys",

abstract = "The use of commercially available and laboratory made Ni-Si-Cr brazes for wetting and bonding Si3N4 has been explored. The microstructure and chemistry of brazed joints has been characterized by techniques such as optical microscopy, scanning electron microscopy, electron probe micro-analysis and X-ray diffraction. Si3N4 was wetted well by all the braze alloys at 1150–1200 °C, but the joint quality obtained was poor because of the formation of brittle phases and solid solutions.",

author = "G. Ceccone and M.G. Nicholas and S.D. Peteves and A. Kodentsov and J. Kivilahti and {Loo, van}, F.J.J.",

year = "1995",

doi = "10.1016/0955-2219(95)00015-M",

language = "English",

volume = "15",

pages = "563--572",

journal = "Journal of the European Ceramic Society",

issn = "0955-2219",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - The brazing of Si3N4 with Ni-Cr-Si alloys

AU - Ceccone, G.

AU - Nicholas, M.G.

AU - Peteves, S.D.

AU - Kodentsov, A.

AU - Kivilahti, J.

AU - Loo, van, F.J.J.

PY - 1995

Y1 - 1995

N2 - The use of commercially available and laboratory made Ni-Si-Cr brazes for wetting and bonding Si3N4 has been explored. The microstructure and chemistry of brazed joints has been characterized by techniques such as optical microscopy, scanning electron microscopy, electron probe micro-analysis and X-ray diffraction. Si3N4 was wetted well by all the braze alloys at 1150–1200 °C, but the joint quality obtained was poor because of the formation of brittle phases and solid solutions.

AB - The use of commercially available and laboratory made Ni-Si-Cr brazes for wetting and bonding Si3N4 has been explored. The microstructure and chemistry of brazed joints has been characterized by techniques such as optical microscopy, scanning electron microscopy, electron probe micro-analysis and X-ray diffraction. Si3N4 was wetted well by all the braze alloys at 1150–1200 °C, but the joint quality obtained was poor because of the formation of brittle phases and solid solutions.

U2 - 10.1016/0955-2219(95)00015-M

DO - 10.1016/0955-2219(95)00015-M

M3 - Article

SN - 0955-2219

VL - 15

SP - 563

EP - 572

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

ER -

The brazing of Si3N4 with Ni-Cr-Si alloys

Abstract

Access to Document

Fingerprint

Cite this