Solids loading and grade on mineral froth bubble lamellae

E. Ventura-Medina, N. Barbian, J.J. Cilliers

Research output: Contribution to journalArticleAcademicpeer-review

28 Citations (Scopus)

Abstract

This work describes the effect of flotation operational variables on the solids loading in bubble lamellae on the surface of flotation froths. For this purpose, a series of industrial experiments in two copper concentrators were carried out to sample the solids in the bubble films under different steady state operating conditions. Samples of the lamellae were taken by touching the top surface of the bubbles with a glass slide. The amount of solids per unit area in the bubble lamellae was determined gravimetrically and by image analysis. Also, the grade of the solids in the bubble lamellae was measured. The operational variables under study were air flowrate, froth depth and frother concentration and were varied to allow statistical interpretation of the results. It was found that the solids loading in bubble lamellae decreases when increasing the air flowrate and increases with an increase in the froth depth. There were no clear trends in the solids loading when varying frother concentration alone although its interaction with other variables is statistically significant. The grade of the bubble lamellae measured was almost constant under different operating conditions.

Original languageEnglish
Pages (from-to)189-200
Number of pages12
JournalInternational Journal of Mineral Processing
Volume74
Issue number1-4
DOIs
Publication statusPublished - 19 Nov 2004
Externally publishedYes

Keywords

  • Bubble
  • Froths
  • Lamellae
  • Solids loading

Fingerprint

Dive into the research topics of 'Solids loading and grade on mineral froth bubble lamellae'. Together they form a unique fingerprint.

Cite this